Jump to content

Zuban

Members
  • Content Count

    35
  • Joined

  • Last visited

Community Reputation

33 Excellent

About Zuban

  • Rank
    Newbie

Recent Profile Visitors

1231 profile views
  1. some more pics of the m-05 chassis
  2. I have just discovered that the m-07 has come out, which seems to have affected values of these so updated prices, m-05 for £75 posted and m-06 for £60 posted.
  3. Would like to clear £200 after postage ideally.
  4. It's a renaultsport Clio 200 I'm preparing for track. Happy to entertain offers on the tundra.
  5. Tamiya Neo Scorcher TT-02B buggy for sale. This is an extremely fast buggy, and has been upgraded to handle the power with almost every part of the drivetrain upgraded to cope with the power of the mamba max pro and 5700kv motor. Postage to mainland UK is included in price. Upgraded with the following parts: Ball bearings used throughout. Castle creations 5700kv 4 pole motor. Castle creations mamba max pro ESC, and castle link. On/Off switch removed to reduce wiring, powers on with battery connected. (wired for 4mm bullet connector to battery) DF-02 bevel gears and differentials (metal gears as stock plastic do not survive long) Square racing Japan universal shafts front and rear. Square racing rear hubs Tamiya aluminium centre shaft with aluminium drive cups. Tamiya aluminium steering mechanism Adjustable turnbuckles all round. Fresh set of shocks and springs newly built. Square racing carbon fibre rear shock tower (plastic stock part flexes too much, do not run front carbon tower as angle of deflection will mean it does not survive an impact.) Yeah racing adjustable motor mount. Custom gearing with 34 tooth pinion along with the powerful motor make this a very fast buggy. High speed spur gear set allowing use of any spur gear. Hitec HS-7966HB coreless steering servo for ultra quick and accurate steering. Custom rear wing. Pro line Dirt Hawg tyres. 2 channel etronix pulse radio control transmitter and receiver. This buggy has been pushed hard to find the limits of the tt-02b, but every component has always been replaced or upgraded where needed to get to what I believe is the most durable setup. Would like to get £260 posted given the components used in the drive train but happy to entertain reasonable offers. Check my vids in the youtube thread to see how quick this thing is.
  6. Hi no trades, my 1:1 car project is needing some attention hence the sale.
  7. For sale unfinished Tamiya Toyota tundra high lift with 3 speed gearbox. Mostly built but not finished, and never painted. Comes with 4wdrc high turn motor, steering and gear change servo's, and partially wired with led lights. Will come with original box, the inner part of which has unfortunately caught some overspray from another project car. Selling as its been sitting for over a year now and with other projects it makes sense to move this one on. It has never been run apart from a short distance on carpet to test the drivetrain. I would like £260 for this thanks.
  8. Hi, I have a couple of cars i'm looking to move on as i havent touched them for about a year now, I havent put them on ebay yet offering them here first. First up is my M-05, originally bought with the vw golf shell, it comes with a crx shell aswell, both shells have been used and the golf shell has a split at the front i stopped using it to prevent further damage. TRF dampers and springs, and rear ARB, ball bearings used throughout, and if i remember rightly the high speed gearset. The front diff is filled with oil and is leaking slightly so will need attention. This car is absolutely superb to drive, it has a torque tuned motor in it which is well matched to the chassis. I'm looking for £75 posted go mainland uk. Has everything bar receiver. Secondly, is my M-06, its a stock chassis except for the 3-racing diff installed, i've never got round to actually running it with this diff and its seen very little use before that. Its been a project to fit the abarth tc1000 shell to it, which has required removing some of the plastic model engine but it will all fit up and look like the engine is still there, and if interested I can add some pictures of that. I'm hoping for £60 for this one posted. Will need receiver and servo but inclues esc. both will come with motors and wheels and tyres. Will consider any offers.
  9. easily done, I have a tt02b as well and I think the only reason I haven't done this is just luck lol.
  10. are both axles spinning in the same direction? is one of the diffs the wrong way round?
  11. I didn't find the ball diff lasted very long with a high powered brushless, it stripped the splines off the outdrives.
  12. I'm using the eagle racing universals with the standard Tamiya nyloc nuts and the standard plastic hex's and haven't had any problem so far running my 5700kv motor on 2s
  13. I have added a brake light, I've kept it minimal, works on application of the brakes, and inspired by the f1 rainlight/brakelight which I had stuck in my head since you suggested it.
×
×
  • Create New...