Jump to content

Katan

Members
  • Content Count

    188
  • Joined

  • Last visited

Community Reputation

10 Good

About Katan

  • Rank
    Member

Contact Methods

  • Website URL
    http://www.ssd-rc.com/

Profile Information

  • Location
    Leicester
  1. I made a few hop ups for the TRX4: http://www.ssd-rc.com/parts-for-trx-4.html
  2. Nice work! Good to see it is actually possible to get things made locally.
  3. Thanks. Depends how well the front winch bumper sells... Doesn't seem to be any demand for Tamiya parts from the scale crowd. I also get the impression that the Tamiya crowd prefer Tamiya hopups or just aluminum versions of stock parts. That is not what I do. If I'm wrong, educate me...
  4. The SSD range has grown rapidly in the last 6 months Plus many more: http://www.ssd-rc.com/
  5. The TG10 tank was well known for not holding pressure. Fill the tank, block the exhaust output and pull the cord until you see fuel getting to the carb. Then unblock the exhause and try again, it should start. You need to change the tank to the TG10R tank if you can find one. I used to have a couple of fully hopped up TG10s about 10 years ago with lots of Racy (Japanese manufacturer) parts. If you plan on running it a lot get some spare diff cases as when you hit something the shock mount on top of the diff case is a weak point. The rest of the car is pretty bullet proof and a lot of fun to drive.
  6. Katan

    RC4WD Reps?

    I dont work for them anymore. You will have to email them with these images. I started my own brand: ssd-rc.com
  7. Thanks. I updated the first post.
  8. As some of you may know I used to design for RC4WD. I have now started my own brand and range of scale RC parts: Much more to come from SSD in the new year. I realise they are not necessarily Tamiya related but thought some of you may be interested... Only available from Dealers: http://www.ssd-rc.com/where-to-buy.html
  9. Hex heads tools dont need any extra clearance. Cross head tools have a much larger OD and so may need to be considered when designing parts. I prefer the look of hex heads too.
  10. The G2 chassis is not designed for leaf springs. There are no mounting holes for the hangers/shackles.
  11. He is not, I know for sure. There is no RC4WD warehouse in Hong Kong.
  12. I think there is some confusion about location here. I dont think he is anywhere near the RC4WD warehouse.
×
×
  • Create New...