Jump to content
Ad Lav

Tamiya 1/16 Pershing

Recommended Posts

463_zpspxou3xh0.jpg

Here's how she looks as of Sunday afternoon, mint condition and built/painted very well.

Decided messing about with cheaper projects was daft as you spend as much money as a full option Tamiya in the end.

Share this post


Link to post
Share on other sites

Weathering on the Pershing nearing completion!

Pigment and thinned Buff brushed on, excess wiped with thinners.

Chips and detail work done.

Stowage added with webbing and straps.

FullSizeRender_zpslubv8muh.jpg

IMG_2043_zps3tu02fwa.jpg

IMG_2044_zpsossprkuy.jpg

  • Like 1

Share this post


Link to post
Share on other sites

Not quite finished, been genre at to get back into Tamiya stuff after a break for a few years (kids/house/wife) :)

Share this post


Link to post
Share on other sites

That's looking nice n dirty Adam, great work. Where did those C ration crates come from? They are spot on!

Share this post


Link to post
Share on other sites

That's awesome one day the tank for me to its like it must be done at some point!

Share this post


Link to post
Share on other sites

Thanks Nic - the ration crates are part of the kit! They come with Sherman and Pershing kits.

You can buy the sprues individually, I get mine from axels modellbau, about £6 each. Comes with Jerry cans, ration boxes, ammo boxes etc.

Love my tanks - due to start the Tamiya Leopard at some point!

Share this post


Link to post
Share on other sites

Nice! I've had one on the go since March - might have it finished by next March if I'm lucky!

  • Like 1

Share this post


Link to post
Share on other sites

They're quite involving to build, lots of bits to add and fettle with.

I think I'm done with it tonight though :)

Share this post


Link to post
Share on other sites

The finished article! Did a burnt ember wash tonight on raised lines etc and finished the figures face. Helmets added to stowage.

Don't think there's much more I can do...12ca87d30dd015f25cb75befcf633322.jpg

2e981bee4d8c5f0df3c4e9e11f7ddb0a.jpg

af4aa2b9e893c75e7d9c173bf88bd5cf.jpg

  • Like 3

Share this post


Link to post
Share on other sites

Very nice indeed, loving the grubby look - it's making mine look far too factory fresh, how did you get the bare metal effect? Did I need to do something before I painted it green or can this be achieved after?

Pershing%20Crop_zpsi6idmvaq.jpg

Share this post


Link to post
Share on other sites

Looks good without the skirts! I like it!

My previous Pershing I sold a few years back was painted desert yellow and looked so good without skirts. Was tempted to paint it with swastikas 😄

The tank was in Tamiya Olive Drab, ts-62 I think and factory fresh, I decided to weather it by using the following:

Tamiya thinners

Tamiya buff acrylic

Mig pigments (sand I think)

Mix together, needs to be loose, not lumpy. Apply with a stiff brush into the wheels and suspension/lower hull. Wipe of the raised areas with a cloth and leave to dry.

Do the same with the upper hull but not as much, focusing on where the mud/dust would flick up.

Turret in similar places. Again, wipe off with cloth.

If you apply too much wait until it's dry then brush with neat thinners and then a cloth.

I highlighted areas with a small brush and burnt umber and then chips with humbrol silver.

Think that's it :)

The pigments won't wipe off when you touch it as the thinners/paint help it to stick.

Share this post


Link to post
Share on other sites

Thansk for the tips!

Its looking ok so far but far too fresh, the stages I went trough are:

Humbrol spray olive drab

Halfords acrylic gloss lacquer

decals applied

a thin wash of olive drab and black 50/50

dry brushed with olive drab and yellow ochre 50/50

Humbrol matt varnish

So that's a wet mix with the pigments then? I've never used Mig pigments but I'm imagining its a fine powder?

I have some Humbrol weathering powders in jars that I have not yet experimented with....

Share this post


Link to post
Share on other sites

Mig are a dry powder, just have equal measures of paint and thinners and a dollop of pigments into a bowl and mix well :)

  • Like 1

Share this post


Link to post
Share on other sites

Some lovely weathering there Adam.

I like to use a graphite pencil to get that "worn down to the metal" look and you can apply it on top of other paint really easily. I start with dabbing a sponge in dark grey paint and then blotching it over the area that's going to be worn and weathered. The sponge gives a nice random pattern but I usually fill in a few bits with a paint brush as well.

While that's drying I scrape an artist graphite pencil with a knife and build up a pile of dust. Then you just dip a finger in the dust and rub it onto the grey painted areas. It doesn't matter if it over laps into the base colours as the grey just helps to give that mottled look. Here's how the back of my StuG 3 looked after this method.

433FF931-6009-4436-AD15-9012350BC78D_zps

You can skip the grey paint and it still looks good but I prefer the end result with it for larger areas. A misting of Matt varnish will set it.

  • Like 2

Share this post


Link to post
Share on other sites

I think I can call her finished :)

Been debating selling her to buy a 1/14 Tamiya truck with Mfc and low loader for the Leopard...

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...