Jump to content

Rich1978

Members
  • Content Count

    124
  • Joined

  • Last visited

Community Reputation

28 Excellent

About Rich1978

  • Rank
    Member

Recent Profile Visitors

1677 profile views
  1. Size yes. It works fine on the flat. I'll need to check b2 I don't have the manual to hand
  2. Hi All I have a MudBlaster 2 and I am running an Etronix waterproof servo but cant seem to get the servo saver on tight enough that , even with a slight bit of contact, it knocks the wheels out of alignment. Is there a standard fix for this ? Thanks in advance! Rich
  3. Thanks Backlash, finally have some time to check this out so hopefully will fix the issue.
  4. So is the mip a recommendation or a must have done u think? Also seen the issues with flexing trailing arms popping out the dog bones. Seems like quite a design flaw from Tamiya. Thanks for the responses btw
  5. Happy xmas all! I'm thinking of buying a MB or Blackfoot to run stock with a torque tuned and nimh. How do they run in this set up? I see a lot of discussions about fixing the gearbox but is this needed with a 25 turn motor?
  6. Yup I generally follow the correct on / off procedure my point was which ever way round the effect was the same. Steering doesn't work either. Haven't tried another esc just the radio gear in another car.
  7. So I powered up my lunch box yesterday and everytime I turn the hand set on the esc switches off. If I turn off the handset the esc switches on. Broken esc? Radio and receiver work fine in another car with a different esc but same type Any ideas?
  8. OK thanks I'm going to go with the gpm towers and those shocks I linked as they look the right length and like the different springs.
  9. Are we talking 90mm eye to eye? http://www.bspspares.co.uk/products/58290k-1-10-scale-rc-alloy-shock-absorbers-damper-set-x-2-black-90mm-long?variant=9289688131
  10. Thanks Nito, does it all just Bolt on with no modding or rubbing?
  11. So just realised all 4 stock ones are cracked on my sons Mudblaster. So what are the definitive shock towers and shocks that are required to extend up to 90mm and do they need any other mods to fit? (ideally not)
  12. Nice. Was wondering what a more vintage truck shell would look like on that chassis!
  13. Do u think a Blitzer Beetle shell would go on this chassis ok? And what about BB tyres, what brushed motor could you go down to?
  14. OK managed to get a charge into the hpi pack just by keeping it charging no luck with the vapex.
×
×
  • Create New...