Jump to content

red eye

Members
  • Content Count

    72
  • Joined

  • Last visited

Community Reputation

0 Neutral

About red eye

  • Rank
    Newbie

Profile Information

  • Location
    10533
  1. Sorry to bring this from the dead. but do these have threaded bodies to adjust preload? From shop pics with all the parts layed out they look like they have but they also showing the plastic preload collars. https://www.tamiyausa.com/product/item.php?product-id=53571
  2. Thanks I'll have a look at your recommendations. I thought the sidewinder was sensored as it has three wires and I been looking at pictures for three wire setups thinking they were sensored.
  3. My son is 5 his tt has my 15t, it's his first proper rc so no experience. the brushless is going in my tb so I can bash with him. sorry, I was half alseep when I posted.
  4. My little boy found my rc cars while exploring and wanted to play. So I stripped the electrics from my tb02/evo 3,brought radio gear and wheels and put them in my tt01. cut a long story short I need a motor and esc so why not go brushless? The brushless system in question is castle sidewinder I'm unsure of what kv/turn motor to get. It had a 15t motor which in the tt I feel I want more power. Which one should I go for, 7700kv 6900 or 5700kv? I manly bash with a bit of drift. I'm open to other motor/esc combos around £100 so your opinions/ recommendations are more than welcome. I just picked the sidewinder because castle was mentioned a lot in the forums before I packed my rc cars away, that and I need it pretty quick with it being summer holidays I want to get as much rc time with my son as I can. also it might end up in a M chassis, I'll be getting one for my sons birthday and if I like it I'll be getting one too.
  5. ok get this i just received the damper stays the rear has the red but on the front one sides normal and the other side has the red hint.
  6. if its a hard shell just sand it back flat, till you got rid of the islands and then dust it with paint so you can see if every things flat and level. this is what i do to 1:1 cars.
  7. ok im converting my tb02 to an evo3 (nearly finished yaay) i just got mt upper deck in the post and its has a hint of red in it, my bottom deck is normal carbon colour. is there any reason why they are a different color? are there any more colors out there?
  8. whats happened to the shop? how do get my parts now?
  9. i have a tt-01 with a ally shaft, adjustable arms and track rods, carbon brace, full ball bearings, cva dampers and i think a few other hop ups
  10. i found this when i was browsing
  11. if you polish the shell with car polish will get if off and also protect it when you take it back out in the rain
  12. im definably getting this shell over the kamtec mk1
  13. noooo the chassis is wrong! i fitted the gearboxes to a evo3 lower deck and the shell fits like a glove! the evo suspension block mounting holes are slightly shorter then the 02 by a few mm
  14. ok a quick update i messed up when drilling the holes (i taped the tb-02 on the carbon fiber sheet) some of the holes were slightly out. so i thought sod this time to buy a new sheet and start again. well an evo lower deck poped up on ebay cheeper then the carbon sheet...so i brought that insted along with a battery holder and suspension balls. all i need now are the damper stays and the upper deck and a few other ally bits
×
×
  • Create New...