Tizer 604 Posted July 22, 2014 I'd like to build a new M-chassis, so another one has to go. Unfortunatly that is my beloved M04RR project. I have had a lot of fun this year with the chassis and I'm very happy that the rear motor concept has been a succes! Some of you might have seen it driving at Tamiyagekken.nl meetings, and it certainly isn't slow!I will make sure to rebuild the car before selling it, so I can check if everything is in good condition and clean so you can go out and race it straight away The chassis has been dremeled to allow normal or shorty lipo's to fit. I have always raced it with a shorty battery. You can only secure the battery with tape (fibre tape from touringcars recommended). If you want to use stickpacks the chassis is easily put back to stock by getting original plastic M04 chassis parts. I will include the original batteryholder, so the chassisparts are all you need in case you want to build it back to stickpack configuration. The car comes with the following: Tamiya M04M kit (new build in January this year) Tamiya gold coated kingpins in all arms Tamiya kingpin with ballstud (M06/M05Gold) in the rear arms Tamiya aluminium motorcooler Tamiya carbon hollow gear shafts Tamiya reinforced gearset Tamiya High-Torque servosaver Tamiya HT aluminium servo arm Tamiya M05 c-hubs and knuckles Tamiya TA04 kingpins in the knuckles Tamiya TRF springs Tamiya TRF ballends Tamiya aluminium servomounts Hiro Seiko blue stainless screws everywhere Hiro Seiko spacers everywhere Hiro Seiko blue serrated wheelnuts Shapeways TWS 3D printed M04RR adapter Yeah Racing 3* toe-in hubs with adjustable upperarm Cross one-piece lowerarms 3Racing 6mm aluminium wheel hexes 3Racing pink aluminium ballstuds everywhere 3Racing damperset (TRF copy) with Yokomo/TRF rubbers Yokomo titanium turnbuckles ball bearings Sweep 33* tires I can add the MX5 body if you like, but it is beat up pretty bad.. Price: 150€ + shippingI can ship worldwide at cost. Can be picked up also around Goes, Netherlands.I also accept bids, but keep it realistic please. The chassis comes as a roller without any electrics. It also comes with blue caps on the dampers (not the beat up pink Tamiya caps) and with M05 c-hubs and knuckles, not the M03M c-hubs and knuckles pictured above. More pictures and the build thread here: http://tamiyagekken.nl/forum/viewtopic.php?f=10&t=11305&start=10 http://www.tamiyaclub.com/forum/index.php?showtopic=73663 Share this post Link to post