Weevie

It appears to be more common than you may think .. https://www.rctech.net/forum/monster-trucks/621828-steering-servo-stripped-again.html

Its an XL36 with plastic splines ! I used the adapter supplied with the kit The replacement (RC World £5.33) arrives on Monday

Its a cheap XL-36 that stripped its splines I have replaced it with an identical model

My TTO2-B Based NEOSCORCHER has stripped all of the splnes from its steering servo Any suggestions why and how to prevent this from reoccuring ? The car has not been used yet - this happened during build/set up I have ordered a replacement servo

I have a TT-02 based NEO SCORCHER Unfortunately -health issues have meant that it has never been run - since purchasing & buidiing almost 6 years ago I have now decided to give it a try and discovered that the steering does not steer (the speed control works though) I can hear the servo ticking away but not moving the wheels What could be the cause of this problem ? I would swear that it did "move" once !

OK thanks - I assume that if it does go "out of range" - the power will shut off - to save it disappearing over the horizon ? Also - what is the best (simplest) way of increasing the steering lock ? The steering IS centred - but the lock is very small !

Thanks

Will the range not be reduced - or is the external aerial just "for looks" ? And what about the holes not lining up ?

I am having problems with a TTO2B based Neo Scorcher, with a ETRONIX PULSE EX2 SPORT radio set, in that the aerial clip, when screwed on to the side of the Rx box fouls the central propshaft and also the pre-drilled hole in the chassis base, does not line up with the hole in the Rx box ....

Its flashing Green on each beep (not double beep) - a continued Beep, beep, beep, beep, beep, beep (you get the idea ?) How do I enable Reverse ? Orange lead from ESC not connected Motor is brushed (I am assuming - SILVER CANNED) ???? How do I actually bind the Tx to the Rx ? I have no instructions !! Also - does it matter, which "slot" the plugs are fitted to on the Rx ? thanks

I have the TBLE-02S ESC Etronix 2.4Ggz radio gear battery is fully charged Rx not bound to Tx - how is this done ? Steering moves when steering moved on Tx

Yes - it is - I have unplugged everything and plugged it back in again - no change beep beep beep beep beep beep beep ...... Could it be a faulty ESC ?

I have a TT-02B based NEO-SCORCHER with a problem I have finally got around to running it for the first time (after almost 12 months) The problem is the beeps When I turn it on - it beeps - 2 times per second - continually The steering obviously needs centering,- it does "steer" to a degree. But the throttle does nothing - not a degree of motor turning !! What have I done wrong ?

I am in Somerset (UK)

So it appears that my ESC is NOT designed to run with the brushed motor - that was all supplied together in a kit ?