KEV THE REV 2319 Posted March 29, 2014 I have a chassis here .Anybody have any idea what it is ?Thanksunknown chassis here :-http://jpegbay.com/g...3508336-.html#1 more pics to help id this chassis - very unusual front wheel design and 'hex' style cap dampershttp://jpegbay.com/gallery/003509150-.html#1 Share this post Link to post Share on other sites
Percymon 2184 Posted March 29, 2014 First one looks like the Peugeot 405 rally type chassis Share this post Link to post Share on other sites
KEV THE REV 2319 Posted March 29, 2014 Thats what I thought it was (or the RS200) but on comparison I don't think it is Share this post Link to post Share on other sites
Incredible_Serious 107 Posted March 29, 2014 First one is definitely not a 405 or RS200.... although I can't quite ID it properly. Third one is an Alpha EP rally car. These came in brown, blue, and black, brown being the first generation. Slightly similar chassis for both EP and GP was available. Not too bad a chassis, as long as you added full bearings and replaced the shocks (which were friction, and the top of the shock had no actual physical connection with the bottom!). With shocks and bearings, these made a fine rally basher. Hope that helps mate! Alex Share this post Link to post Share on other sites
KEV THE REV 2319 Posted March 30, 2014 Thanks Alex . The upper deck on the chassis is blue , the rest of it is black , it must have had the deck replaced at some point , thanks again . Share this post Link to post Share on other sites
KEV THE REV 2319 Posted April 20, 2014 any ideas on this chassis ? Share this post Link to post Share on other sites
tomolupus 0 Posted April 21, 2014 The shocks looks like the ones on my Panda Challenger 2000 buggy. http://www.retromodelisme.com/voiture_pages/56965/challenger-2000-panda.html And the bodypost looks like the one that came with my Panda Danny Thompson's Stadium Racer parts lot. http://www.retromodelisme.com/img/voiture/panda/danny_thompson_s_stadium_racer/P_page_003.jpg Hope it helps some. Share this post Link to post Share on other sites
KEV THE REV 2319 Posted April 21, 2014 Hi .Thanks for the info . I think you are on the right line . It looks like a mix up of a few models here . The front looks a lot like the Panda 4wd , the wheels are the same too . I can't find the upper deck on the Panda manuals so it might be from another model , but thanks again for your help - much appreciated Share this post Link to post Share on other sites
tomolupus 0 Posted April 21, 2014 I found this picture of a Thunder Tiger. http://www.vintage-rc.net/forum/viewtopic.php?f=25&t=17803 Share this post Link to post Share on other sites
KEV THE REV 2319 Posted April 21, 2014 That looks like it - looks like the wheel covers are missing but the upper deck is the same , as are the front arm blocks and chassis shape etc - thanks again for the info Share this post Link to post Share on other sites
KEV THE REV 2319 Posted April 22, 2014 Can anyone put a name to the chassis pictured above in tomolupus' reply ? Share this post Link to post Share on other sites
tomolupus 0 Posted April 22, 2014 I think the name SSR was mentioned somewhere. Share this post Link to post Share on other sites
KEV THE REV 2319 Posted April 22, 2014 Yes , I checked that out but it doesn't match the chassis Share this post Link to post Share on other sites
hammerstien 187 Posted April 22, 2014 Panda chassis maybe Share this post Link to post Share on other sites
tomolupus 0 Posted April 26, 2014 I found these hubcaps for the Thunder Tiger SSR / EX-10 and Nitro Tour cars. http://www.powertoys.se/produkter/tillbehor-bil/reservdelar/thunder-tiger/navkapslar-subaru-23-ttpd0651/ Share this post Link to post Share on other sites