TB-04R Chassis Kit
Model Number: 84412
Released
Drive
4WD
Suspension
Fully independent double wishbone
Chassis Description
TB-04R
Body Type
Not Included
Motor
Not Included
Original Price
MSRP $654.00
Scale
1/10
Tires
front:Not Included
Rear:Not Included
The kit comes with many of the Hop-Up-Option parts that have been developed to enhance the performance of the car.
All the plastic FRP (fibreglass Reinforced Parts) have been replaced with Carbon Reinforced Plastic for superior feel and durability on the race track.
Standard Spec TB-04 VS. TB-04R:
The TB-04 is a 1/10 scale 4WD machine that incorporates a drive-shaft down the center of the chassis to engage the front and rear gearboxes.
The differentials inside the gearboxes are newly designed as they utilize a sealed gear differential system whereby the internal gears movement is controlled by different viscosity differential fluids.
The TB-04R comes with a Front Direct Coupling (Spool) and the standard rear sealed gear diff unit.
The double-wishbone suspension system on the standard TB-04 utilizes the same 'short reversible' type that has been used on the TB-03, TA-05 Version II, TA-06 and the TRF (Tamiya Racing Factory) 416 and 417 World Championship machines. The TB-04R is equipped with TRF418/419 suspension components.
The TB-04 also incorporates 'IFS' (inboard front suspension) whereby the front shocks are positioned horizontally and low to the chassis, so that low profile sports car body shapes can be accurately reproduced without losing any realistic scale appearance. The TB-04R is equipped with front and rear carbon plate shock towers, but it’s possible to use an IFS set up if desired.
Included Hop-Up Options:
TRF418 Suspension Arm & Front/Rear Uprights
TRF Big Bore Dampers x4
aluminium Suspension Mounts (1A x2pcs., 1XB, 1D)
Item 54592 TB-04 Front Direct Coupling
Rear Gear Differential Unit
TB-04 aluminium Steering Arms (L/R, Black)
aluminium Turnbuckle Shafts
Hex Screws
Lightweight Universal Shaft Set (Rear) x2
TB-04R Carbon Front/Rear Damper Stays* (designed specifically for this chassis kit)
Item 54578 06 Hard Coated aluminium Pinion (25T)
TB-04 aluminium Steering Bridge (Black)
Front Double Cardan Drive Shafts (44mm)
Full Ball Bearings
Scale: 1/10
Construction type: Assembly kit
Terrain use: On-Road
Drive-train: 4WD
Drive type: Gearbox
Drive line: Universal
Differential type: Sealed oil filled gear and Spool
Suspension: Fully independent double wishbone
Steering mechanism: Bell-crank
Shock damper: Oil-filled damper
Shock damper material: aluminium
Tire type: Not included
Tire tread: N/A
Body material: Not included
Chassis material: CRP (Carbon reinforced plastic)
Electronic Speed Control (ESC) : Not included
ESC model: N/A
LED Light buckets: No
LED lights: No
Motor: Not included
Bearings: Shielded ball bearing
Adjustable camber: Yes
Adjustable toe angles: Front and rear
Adjustable ground clearance: Yes
Adjustable gear ratio: Yes
Adjustable wheelbase: Yes
Adjustable track width: Yes
Adjustable shock angle: Yes
TRF418 Suspension Arm & Front/Rear Uprights
TRF Big Bore Dampers x4
Features 4 varieties of aluminium suspension mount ? 1A (2pcs.), 1XB, and 1D.
Hex screws
Rear Gear Differential Unit
Lightweight Universal Shaft Set (Rear) x2
TB-04R Carbon Front/Rear Damper Stays* (designed specifically for this chassis kit)
TB-04 aluminium Steering Bridge (Black)
Front Double Cardan Drive Shafts (44mm)
aluminium motor plate, propeller shaft, pilot shafts and transmission shafts are packaged in the kit.
7.2v battery & charger, 2-channel radio gear, wheels, tyres, body set, motor, esc, polycarbonate paint