TA07R Chassis Kit
Model Number: 84433
Released
2018
Drive
4WD Belt
Suspension
Independent Double Wishbone
Chassis Description
TA07R
Body Type
Not included
Motor
Not Included
Original Price
MSRP $644.00
Scale
1/10
Tires
front:Not Included
Rear:Not Included
This 4WD R/C touring car chassis assembly kit takes the single belt-driven TA07 PRO and pairs it with a vast range of option parts, for a great racing setup right out of the box! In addition to a number of Hop-Up Option parts, it also has parts from the Tamiya Racing Factory Series and even a new low-friction drive belt made specially for this model.
About the TA-07
The TA-07 chassis racing kit is based around a composite structure that consists of a narrow lower deck and an upper frame. The part design layout provides the chassis optimal torsional rigidity which can be further adjusted by removing the frame center section. The highly efficient single belt drivetrain offers 3 motor position locations, each with its own performance characteristics suited to different tracks and setups. Proven TRF419 design suspension, gear differential units and steering components are combined with proven TRF aluminium shock dampers and universal shafts to make this chassis a hi-spec racer!
New parts included in this kit:
TA07R Low Friction Belt (White)
TA07R Linear Damper Springs
Included Hop-Up Options:
TRF Big Bore Dampers
Full Ball Bearings
42216 44mm Double Cardan Joint Shaft (2pcs.) $82.00
42281 TRF418 Stabilizer Set (Front & Rear) $30.00
54704 TA07 Aluminium Steering Arm Set $24.50
54705 TA07 Aluminium Steering Bridge $15.50
54724 TA07 Aluminium Servo Mount $26.00
54690 TA07 Front Direct Coupling Set (37T) $22.50
54706 TA07 Aluminium Counter Pulley $7.75
54722 TA07 Aluminium Center Pulley (18T) $21.50
54725 TA07 Aluminium Motor Mount Posts $9.25
53509 Hard Fluorine Coated 0.6 Aluminium Pinion Gear (20T) $9.75
54720 TA07 Carbon Damper Stay (Front) $16.00
54721 TA07 Carbon Damper Stay (Rear) $18.00
53823 Clamp Type Aluminium Wheel Hub (5mm Thick) $27.00
53851 46mm Titanium Coated Suspension Shafts $11.00
53917 2.6mm Titanium Suspension Shaft - For Reversible Suspension $20.00
54568 TRF418 C Parts (Carbon Reinforced Front Uprights) $5.75
54580 Carbon Reinforced Hub Carrier (4?) for Reversible Suspension Arms $9.25
54692 TRF419 E Parts (Rear Uprights) $7.00
54740 TA07 D Parts (Suspension Arms, Medium) $9.00
54070 TB-03 Aluminium Suspension Mount (1B) $15.00
54072 TB-03 Aluminium Suspension Mount (1D) $15.00
54172 TA05 Ver.II Separate Suspension Mounts (1A-1XA) $21.00
54173 TA05 Ver.II Separate Suspension Mounts (1B-1XB) $21.00
53827 Stabilizer Rod Stopper $9.00
54648 Fluorine Coated Stabilizer Ball Connector Set $7.50
$469.25 Retail Value!
1/10 scale R/C chassis assembly kit. Length: 370mm, width: 187mm, wheelbase: 257mm.
Drivetrain efficiency is optimized with double cardan drive shafts, front direct coupling, aluminium counter pulley, a new low-friction belt (white) and more.
The suspension has been fine tuned for a traction boost, employing medium rigidity suspension arms, carbon fiber reinforced uprights and hub carriers, TRF418 stabilizers, aluminium suspension mounts, TRF big bore dampers and carbon fiber damper stays.
Aluminium steering arm and bridge components give direct and responsive steering feel in conjunction with an aluminium servo mount.
3 selectable motor positions offer great freedom of setup options.
Note: Body, motor, wheels/tires, R/C equipment, battery pack and charger are sold separately.
About the TA-07
The TA-07 chassis racing kit is based around a composite structure that consists of a narrow lower deck and an upper frame. The part design layout provides the chassis optimal torsional rigidity which can be further adjusted by removing the frame center section. The highly efficient single belt drivetrain offers 3 motor position locations, each with its own performance characteristics suited to different tracks and setups. Proven TRF419 design suspension, gear differential units and steering components are combined with proven TRF aluminium shock dampers and universal shafts to make this chassis a hi-spec racer!
New parts included in this kit:
TA07R Low Friction Belt (White)
TA07R Linear Damper Springs
Included Hop-Up Options:
TRF Big Bore Dampers
Full Ball Bearings
42216 44mm Double Cardan Joint Shaft (2pcs.) $82.00
42281 TRF418 Stabilizer Set (Front & Rear) $30.00
54704 TA07 Aluminium Steering Arm Set $24.50
54705 TA07 Aluminium Steering Bridge $15.50
54724 TA07 Aluminium Servo Mount $26.00
54690 TA07 Front Direct Coupling Set (37T) $22.50
54706 TA07 Aluminium Counter Pulley $7.75
54722 TA07 Aluminium Center Pulley (18T) $21.50
54725 TA07 Aluminium Motor Mount Posts $9.25
53509 Hard Fluorine Coated 0.6 Aluminium Pinion Gear (20T) $9.75
54720 TA07 Carbon Damper Stay (Front) $16.00
54721 TA07 Carbon Damper Stay (Rear) $18.00
53823 Clamp Type Aluminium Wheel Hub (5mm Thick) $27.00
53851 46mm Titanium Coated Suspension Shafts $11.00
53917 2.6mm Titanium Suspension Shaft - For Reversible Suspension $20.00
54568 TRF418 C Parts (Carbon Reinforced Front Uprights) $5.75
54580 Carbon Reinforced Hub Carrier (4?) for Reversible Suspension Arms $9.25
54692 TRF419 E Parts (Rear Uprights) $7.00
54740 TA07 D Parts (Suspension Arms, Medium) $9.00
54070 TB-03 Aluminium Suspension Mount (1B) $15.00
54072 TB-03 Aluminium Suspension Mount (1D) $15.00
54172 TA05 Ver.II Separate Suspension Mounts (1A-1XA) $21.00
54173 TA05 Ver.II Separate Suspension Mounts (1B-1XB) $21.00
53827 Stabilizer Rod Stopper $9.00
54648 Fluorine Coated Stabilizer Ball Connector Set $7.50
$469.25 Retail Value!
1/10 scale R/C chassis assembly kit. Length: 370mm, width: 187mm, wheelbase: 257mm.
Drivetrain efficiency is optimized with double cardan drive shafts, front direct coupling, aluminium counter pulley, a new low-friction belt (white) and more.
The suspension has been fine tuned for a traction boost, employing medium rigidity suspension arms, carbon fiber reinforced uprights and hub carriers, TRF418 stabilizers, aluminium suspension mounts, TRF big bore dampers and carbon fiber damper stays.
Aluminium steering arm and bridge components give direct and responsive steering feel in conjunction with an aluminium servo mount.
3 selectable motor positions offer great freedom of setup options.
Note: Body, motor, wheels/tires, R/C equipment, battery pack and charger are sold separately.