BiggusDitchus

I could do with the exhaust tips but really need a shell. Anyone? Please!

Thanks for the offer but idrally a pair. Still looking for a Bodyshell

Im looking for a bodyshell for a Mardave Apache, condition not overly important. Would also like some tyres. Please let me know what you have for sale.

I for many years had racing colours, using red, white and blue. Recently revived the colours for the recent Iconic/A1 Revival meet. I have 3 the same now and most likely keep my racers like this too. RC10, DTO2 and DT03

They don't, I will be searching out some aluminium lights for it that I can get working.

This technique is how I had 2 of my lorries "painted" done by a company in Warrington which is sadly no more.

Taken a while but I guess I needed some special wheels to suit the truck then saw these on Joes ebay site and had to get them. At the Leyland show Gareth was selling a set of low profile RC4wd tyres and grabbed them cheap (£5 for the pair). Think it looks tons better. Reckon we could do some damage with those spikes

All but Toybota on ebay. http://www.ebay.co.uk/sch/biggusditchus/m.html?item=281195799791&ssPageName=STRK%3AMESELX%3AIT&rt=nc&_trksid=p2047675.l2562

Parkzone Se5a - 37inch wingspan In great condition a nice stable flier, I will include 1 turnigy 3s lipo and the spectrum AR600 receiver in it so just needs an air use Spektrum transmitter like DX6i. I also have more Turnigy Lipos that I would sell for £7.50 each. (selling as I am a member of a club that flies off water) £80 offers considered.. posting is not possible due to size so its either collection or could arrange to meet up if not too far. now on ebay http://www.ebay.co.uk/sch/biggusditchus/m.html?item=281195799791&ssPageName=STRK%3AMESELX%3AIT&rt=nc&_trksid=p2047675.l2562

Don't use this just sits in the box, so must go. Comes with the original transmitter (2.4ghz), charger (lipo) and of course the helicopter itself. Also included is 3 Overlander lipos (one of which has never been used) £50 including post in UK. Now on ebay http://www.ebay.co.uk/sch/biggusditchus/m.html?item=281195799791&ssPageName=STRK%3AMESELX%3AIT&rt=nc&_trksid=p2047675.l2562

Time for a clearout so first up is a Tamiya flat bed trailer, metal work painted blue (flaking a little) but overall in great condition. £85 including post in UK - SOLD Project Toybota £50 including postage in UK... for more information check out my thread http://www.msuk-forum.co.uk/topic/168517-top-gear-toybota/ - basically just needs electronics fitting. Jeep bodyshell - Willy Rash A bodyshell I airbrushed many years ago for Twinset then got it when he stripped the truck it was mounted on, would make a great scaler shell.. wheelbase about 260mm and width is 190mm at wheelarches. £25 including postage in UK and my Mini Mono.. This is a fast brushless model, wood construction, included all the hardware, motor, speed controller and servo.. just needs a 2200 mah 2s lipo, transmitter and receiver. £50luding postage in UK

Was an enjoyable day, shame that the tide was in LOL. Day ended badly for me when I was unloading the car some local scroat decided to help themselves to Erica's Losi Desert Truck and my Spectrum DX6i. I would be up for a meet again sometime, Delamere sounds great although may have to wait for a while as I now have no transmitter for my cars

It's going to be grass having to move

Ok, then I wwas thinking 11 butI will say I will get there 12 ish Question is what to bring, might have to be most of them lol, thundershot, brat, hotshot, bruiser, holiday buggy, sand rover, wild one, scorcher and buggy champ . And maybe for a bit of lunacy my axial exo.

Shall we try again, with a meet on Sunday, weather permitting? At Fort Perch rock.

Thanks for great comments and Skottoman/IBIFTKH I will certainly look into that cheers for advice

The painter has a shot blaster which he let me use, turned the pressure down very low and spent a while clearing paint off. It just needed a light sand.

Cheers Andy, little more done but still loads to do. Paint is finished, the wrap hasn't worked really well but it adds to the effect want to get a logo made up for the side but not sure what.. thinking of the name for it being "deadbeat" in line with all the skulls. The colour is a green, gold, copper flip. Doesn't show well in the photos.

Hey speedy sorry not replied, as you will see in photos I have made a small flatbed with wood sides, grille will just be a basic setup. I have now got the bed sorted along with a fuel tank my mate has done on his lathe. The rear lights are the original marker lights from roof. That's it for now until the shell comes back from paint... this isn't a Rat rod anymore just a Rod

Sat on my shelf getting dusty and will probably never get round to selling it, so up for sale it goes. It has had some damage repaired on the shell then sprayed up in camouflage, the front body mounts aren't as kit they are posts through the shell. The wheels in photo have been replaced with kit standard rims, now with tyres. There is no electronics apart from an axial 27 turn motor. I am pretty sure it has a metal motor mount in it. £70 or fair offer. Mini Mono Fast electric boat This is a fast brushless model, wood construction, included all the hardware, motor, speed controller and servo.. just needs a 2200 mah 2s lipo, transmitter and receiver. £50 or fair offer. I also have a Nine Eagles helicopter Solo Pro 328 4 channel 2.4ghz boxed with 3 extra lipo batteries. Includes transmitter, and lipo charger £60 or fair offer.

Yeh I was going to post that too, so no running for me this weekend.

I was thinking of Fort Perch rock its not a bad place to run.

So whos up for a meet up on 15th September, I think a beach run with vintage cars.. anyone?

I went down to meet up with Chris the other day, cracking setup and a great bunch of guys.. I didn't leave empty handed either LOL.