bigu2fan

I am looking for a butterfly SRB chassis (can be original CRP, repro, new, used, custom). It can be aluminum or whatever. I have seen the new aluminum chassis being offered by http://radshaperc.com/ but I am looking for a completely flat chassis. The radshaperc.com one is slightly angled on each side to protect the plastic mechanism box. I e-mailed radshaperc to see if he would sell a flat one several days ago, but I haven't heard back. Does anyone have anything available that would fit the bill? Thanks very much in advance for any help you can give.

thanks for the tip!

thanks very much for the tip on the body. i will order one! yes, i have been away for several years. two kids, etc., but am now back in! Hey twinset, didn't we swap parts on a couple of occasions a long time ago?

Hi! I am in the market for an unpainted, lexan Sand Scorcher body, i.e. the Parma manufactured one. Does anyone have one to sell or know where one can be purchased? I have been keeping my eyes on eBay, but no luck so far. Also, I am looking for what I have seen listed as the CRP "Butterfly" (short) chassis for the special racing buggies. I am looking for exactly what is described and pictured at this link: http://www.rcchopshop.com/crp/1021.html I am in the US. Please let me know what you have. Thanks very much in advance for any help you can give. --bigu2fan willgreenlee@yahoo.com

Hi! I have three brand new packages of CRP front end pins (4 pins in each package) for the RR, SS, SC and F150. These are much stronger than the factory Tamiya pins. Price is $10 a pack, plus postage. Please let me know if you are interested. I am happy to send pictures if you like. Thanks! --Will willgreenlee@yahoo.com

I recently put a new and un-used mech. box up on eBay. The winning bid was $200, but the bidder didn't pay. I ended up selling it to a guy in the Shetland Islands for $135. --Will willgreenlee@yahoo.com

I forgot to include my e-mail address in the above post. It is: willgreenlee@yahoo.com

Sand Scorcher/Rough Rider parts list. All parts are NEW and UNUSED unless otherwise noted. I am happy to send pictures of any of these parts if you'd like. Just let me know. Make me an offer on any/all of the parts. I am in the U.S., and I'm hoping to keep these off of eBay. 1. Water Resistant Electronics Case (new, new, new!!) [sOLD] 2. Final Shaft -- there are two of these in the package [sOLD PENDING ARRIVAL OF FUNDS] 3. Buggy Ballrace Set (part 196) (I have two sets of these) 4. Screw Bag A 5. Screw Bag B [sOLD] 6. Screw Bag C 7. Torsion Bar Pipe 8. R Arm Shaft (there are 4 of these in the package) 9. Counter Shaft (there are 4 of these in the package) 10. Rod Boot (there are 3 of these in the package) 11. FR Spring L (there are 4 of these in the package) 12. Both spur gears in a package 13. Pipe Joints (there are 4 of these in the package) [sOLD] 14. Rod Stopper 15. U-Joints (there are 2 of these in the package) 16. Tie Rods (there are 3 in the package) 17. Stopper pins (there are 7 in the package) [sOLD PENDING ARRIVAL OF FUNDS] 18. Gear set (part X 7436) 19. Screw Bag D 20. Cam Locks And Springs (4 of each) 21. Steering Rods (2 in the package) 22. Counter Gear, Final Gear and Drive Shaft (I have three packages of these, each containing these three gears) 23. Tool Bag (for the Superchamp) 24. Ford Ranger rollbar (USED) CRP Hop Up Parts for Sand Scorcher/Rough Rider 1. Small Brass Gear 2. Large Brass Gear 3. Front End Pins (there are four pins in the package) I have two of these

Here is my e-mail address: willgreenlee@yahoo.com I forgot to add it to the original post. --Will willgreenlee@yahoo.com

All parts are NEW and UNUSED in ORIGINAL TAMIYA PACKAGING unless otherwise noted. I am happy to send pictures of any of these parts if you'd like. Just let me know. I'm in the USA and am open to all offers. I cannot accept PayPal. --Will 1. Water Resistant Electronics Case $170 2. Front Bumper (part 135) $65 3. Racing Buggy Damper Set (part 118) $65 4. Rear Guard (part 114) $70 5. Radio Box Well Nuts (part 201) $17 6. A Parts (plastic motor and gear cover) $90 7. Speed Controller (part 113) $60 8. E Parts (servo saver) $13 9. Roll Bar $40 10. Complete Front End (part 115) $70 11. Antenna $15 12. Final Shaft $10 13. Buggy Ballrace Set (part 196) $30 14. Racing Buggy Universal Joints (part 117) $45 15. Rear Suspension (part 116) $30 16. Screw Bag A $20 17. Screw Bag B $40 18. Screw Bag C $25 19. Screw Bag D $10 20. R Arm Shaft (there are 4 of these in the package) $10 21. Counter Shaft (there are 4 of these in the package) $15 22. Metal Gear Case $70 23. Chassis Plate (this is slightly used, but in excellent condition) $50 24. Rod Boot (there are 3 of these in the package) $15 25. FR Spring L (there are 4 of these in the package) $10 26. Gear Set $15 27. Switch Cover $20 28. Pipe Joints (there are 4 of these in the package) $20 29. Rear Sand Scorcher Paddle Tires and Wheels $45 30. Front Sand Scorcher Tires and Wheels $60 31. Rough Rider Front Tires and Wheels $45 CRP Hop Up Parts for Sand Scorcher/Rough Rider 1. Small Brass Gear $10 2. Large Brass Gear $20

Shaun: I have some NIB front RR tires and wheels for sale. Price is $45 plus shipping. E-mail me if you are interested. Thanks! --Will willgreenlee@yahoo.com

Shaun: I have some NIB front RR tires and wheels for sale. Price is $45 plus shipping. E-mail me if you are interested. Thanks! --Will willgreenlee@yahoo.com

I just bought a Tamiya RS540 Sport Tuned Motor for use in my runner Scorcher. Does anyone know how many turns this motor has? I am asking this to try to determine whether this motor is too hot for my Futaba MC230CR electronic speed controller. Thanks in advance for any help you can give! --Will willgreenlee@yahoo.com

Netsmith: I, too, have a bunch of bent N1 Front Arm Shafts. I really wasn't running my SS very hard and they just kept bending with MADDENING regularity. I was able to find some of the CRP hardened pins which seem to stand up MUCH better than the Tamiya originals. You might try some of these if you can find them. --Will willgreenlee@yahoo.com

I have used these on my runner SS, and the performance was terrible. I ran them with the "chessboard" pattern on asphalt and they spun out VERY easily. It was VERY difficult to get decent traction. Quickly went back to my RR rears on the asphalt. They ran MUCH better. --Will willgreenlee@yahoo.com