Jay61076
-
Posts
141 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Jay61076
-
-
well here we go lol
what do you say to 45 + shipping
Hi 45 + shipping will do after all it's just been sitting gathering dust , I'll get it packaged up after work tomorrow and get it weighed to work out shipping
Thanks Jay
-
That is exacly what im looking for
but now comes the hard part what are you looking for on an offer i dont really want to do a silly offer
Well to be honest I hadn't put much thought into it as I had always planned to get her restored but it has been sitting gathering dust for the last few years so if you want to make an offer what the worst that can happen :-) at least she would be going to a good home.
Jay
-
what about those picture Jay?
sorry for the delay
I've put some pics of it in my showroom on the main club site... its missing the shell and shell posts also needs an engine and the wheels need replacing but still make a good donor
-
nitro
my email is
Thomasemillentz@gmail.com
I'll try and get some pics on tonight or in the morning after work
Thanks
jay
-
i need a cheap usa-1 doner chassie with working driveline spurgear, engine and center diff i also need 2 shock towers and a original decent body
i need it fast
Hi is it the electric or Nitro as I have the full chassis with well used wheels No body and no engine I'll try and get some pics if its what your looking for
-
Hi I'm looking for a cheap 21 size or above to fit a Kyosho Mad force or Kyosho USA1 I got in a trade
I suppose a 21, 28, or even a 31 would do as long as the price is good
Thanks in advance
Jay
-
Just got a call this morning to say that the RC model display part of the Edinburgh Truckfest has been cancelled due to them not having a suitable display area
Just my luck .... well they might be back on next year :-(
I'll just have to get some more trucks and do a small show on my drive :-)
-
Well finally got a reply back from the Truckfest Show organizers and Im now set up for the Edinburgh show in August
Anyone else on here going top that one?
Jay
-
After a long gap I got my Knight Hauler finished full Bearing set, MFU, 12 running led's on each side plus 12 more added to the front bumper, custom bull bar , lowered sides and rear on the trailer with custom rear bumper and 86 led's all finished in Gloss Black with orange frames, rails and running gear
-
Truckfest
Hi all is anyone taking any of their trucks to any of the Truckfest shows this year?
I saw a few at the Scottish show in Edinburgh last year and was wondering if there is anyone organizing a meet or anything as I now have my small fleet complete ( well near enough) and would like the chance to show them off :-)
-
Hi years ago when I had my 1st Tamiya 3pd Truck I had a Acoms 2ch radio fitted with a toggle switch to allow me to change gears (i.e. 3rd ch)
Is it possible to do this mod myself to any standard 2ch radio or is it just too complicated
-
When I had my shop many years ago The Rep for Tamiya was actually working for Riko aka Richard Kohmstan, So I would imagine that you’ll need to find the current UK distribute and contact them.
Best of luck
Just been on http://www.tamiya.com/europe/euro.htm
U.K. THE HOBBY COMPANY LIMITED 01908-209-480
-
Started on the main truck and one thing went to another and before I knew it most was rebuilt
Hidden most of the MFU wires in heat-shrink and cut holes in the cross beams to allow the wires to be fed along one side
Cut the original plastic plate for the coupler release and mounted it on top of the servo plate just to give it some more shine, also added telescopic aerial
-
Thanks for all the input, hoping to run the MFU cables close to one of the rails on the rig and make cut-outs in the crossbeams for the cables .
The paint on the trailer rails and chassis was nice and dry so could resist putting it together also fitted a nice new set of motorized legs.
This is a quick look at the rear with the new lowered sides to give it more of a euro look, also couldn’t stand the chrome mudguards. yet to sort lighting (lots of LED's)
The lowered side rails where going to be flat alloy plate then I noticed that I had an old florescent light cover with a ribbed surface almost the same as the trailer sides and looks more in keeping
-
Wheels, shocks & springs all highlighted
Chrome work ready for rebuild
New rear bumper for the box trailer
New front bumper Bulbar as the Tamiya one just seems to be the wrong shape :-)
-
Chassis rails, gearbox & frames all painted in satin finish
-
Well after a year of it sitting on the shelf gathering dust and being overlooked I finally decided the make a start on my rebuild.
1st was to strip down the complete thing and see what mess I had to clean up
Wires for the MFU where all over the place and some of the screws had more thread lock than thread but managed to get it stripped
-
dropropped
Now am I sad for trying it ?
-
I'll get some pic's of my Kyosho one and join if that helps :-)
-
Well the title says it all has anyone tried making their own stickers with the inkjet printer paper?
If so was it worth it and what sort of stuff did you use as there is load on e-bay
Or would I be best finding a specialist to print them for me?
-
PM sent
-
My plan was to run the extra led's as separate circuit so as to make things simple
I think with the price of them I just buy both types and see what works out best
Thanks for the help
Jay
-
Thanks for the info
Never realised the rectangular led’s where so cheap
Now the question is can I be bothered filing out about 60 holes in the alloy of the truck or do I go the easy rout and stick with round lights
Anyone know it the rectangular one emit less light?
-
I was sure I had a bumper but cant find it all I could find was front and rear tyres, bearing set and top deck.
I keep an eye out as I'm sure I had one somewhere :-)
Need A Kyosho Usa-1 Doner Chassie
in Trade Archive
Posted
Hi sorry for the delay you might not want the truck as Im just back for the post office and they quoted 36.29 for International standard service
Ive checked online and DHL seems to be the cheapest at 24.42 with a standard 50 insurance cover and expected delivery of 5 days
Let me know if your still interested or know of any better cheaper services the total Package is 59cm x 39cm x26cm and weighs 5.3Kg