Jump to content

mikef350

Members
  • Content Count

    161
  • Joined

  • Last visited

Everything posted by mikef350

  1. No probs kev ive got some sorted now matey
  2. No probs kev ive got some sorted now matey
  3. Thanks chaps,as always your a big help.and kev that would be great.
  4. Hi all Just bought a original blackfoot and was wanting to no if the blackfoot3 body shell is the same and has tue same holes to mount the body. And ive also got the frog pinion and spur gears to run the blackfoot in torque gear ratio as it mentiones in the frog manual would this work or would it ruin the gearing for the blackfoot.ill be using a sport tuned motor
  5. Hi all Just having a clear out and up for sale i have Original blackfoot project Chassis is already done and fully ball raced but needs the rear cross brace for body mounts.the shell has a broken part at the front where the front grill mounts and is missing driver,glass. Comes with a manual and frog manual,lots frog and blackfoot spares,motor and rx and tx and servo(blue wheels nuts and sport tuned motor not included) if sold today the whole lot £50 posted Badger air brush used but in good working order £25 posted Tamiya rc boy chrome rims offers please Kyosho convertable quick charger offers please
  6. Hi all Recently got these rims in a trade but need to sell on to fund a blackfoot ives just bought. Not sure what they worth so any offers taken.They are used but in very good cond and have normal hex fitting.
  7. Swaps new buiit although been run tamiya tt01 zakspeed capri with few hop ups fitted abec 5 bearing set alloy prop and cups alloy motor mount titanium front uj driveshafts would like to swap for a tamya f104 f1 car but may consider f103 f1 car and for the rite f1 car i may leave the black coated trf shocks on the car the f1 car must have rubber tyres £120 plus postage
  8. Id trade over sea's but not interested in the sand viper
  9. best offer over £200 gets it, shell needs some work as it has a crack down top of left wheel arch where it meets the bonnet although you carnt see it from the outside and the grill is broke but do have a used spare which is included,bit of epoxy or glue will sort out the front end,thems the bad bits. the good bits are chassis is in realy good condition which has been totaly striped and rebuilt with new boom racing bearing set new gold tamiya alloy steering upgrade set(old rods included) alloy suspension links (old plastic included) x2 rw racing steel pinions x2 new tamya torque tuned motors futaba high torque servo nip spare tranny case set. also have all the original mechanical speed control etc. prefer cash but also after a nice tamiya touring car wth hop ups Edit:now fixed the front grill with spare grill so front end is now solid
  10. If i was to fit x2 stock rz motors would be best to drop down to one under stock tooth pinion size?which would be 14t and also what pitch is the pinions for the jugg?they look same pitch as hornets,wild one etc etc
  11. sweet cheers steve.bet thats got some power ant it.i love the stock rz motors and may have to try that my self
  12. think ill stick wth the stock 15t pinions then.cheers pal
  13. cheers mate thoughts what iam thinking.i want to run x2 torque tuned motors on 16t pinions (which are 1 tooth bigger than stock pinions) and i found this on the net hes runnng x2 14 single motors conected to an old tekin rebel esc
  14. does any no if a ripmax quake unlimited esc will run x2 motors in my jugg?has any one ever try'd it?
  15. cheers pal,yer i plan to do as much as can.what mods are out there matey?
  16. Hi all Just been and traded this with a iconic member and the truck will be getting some ££££ chucked at it when i decide what direction to go in with it. the turck needs some body work and i need one of the plastic suspension links to complete.so at some point she will be striped ready for a grease down and chiatsu.
  17. wheres nearest train station to clumber park folks?
  18. You mentioned that your hoping your ta01 up Steve I just bought a new in box ta02 racing special limited edition chassis kit to build into my ta02 trouble is I don't think I'll dare run it or open all the packages lol.there may be a nice rally car coming up for trades soon folks as I want something to thrash round at clumber and not worry about it. Must stop the spur moment spending lol
  19. yer i wouldnt be putting anything faster than a super stock bz any way matey but i was wanting to no if they ran ok on the track,do they bog down etc
  20. steveU30 i see you take a cossie to clumber,is it a ta0? chassis car?if so how is it round that track,i am trying to get rid of my ta02 so i have an offroader to bring to one of these meets but if the ta02 is upto the job there ill keep it.
  21. more after swaps realy mate. the split is the worst part and theres been some touch up white on the orignal white where its flaked
  22. Hi all Bought a ltd edt ta02 racing special chassis kit new in box on a big whim with intentions to build it all with the red gearboxes and rally skid plate set from my repsol cossie but to be honest id be too scared to run it so i am after trading both the chassis kit and rtr repsol cossie for another tamiya Iam after a rere sand scorcher rere supershot and i can also offer in the deal a new built unsed and unpainted tamiya m05 mini cooper for modern 3 speed offroader vintage metal 3 speed project more pics and info tomorow when the ta02 special kit arrives
  23. hey up simon ive sent you an email to your address matey
  24. Wow this looks awesome folks. In general what sort of electrics are you guys using?i try'd the whole lipo/brushless thing and as great as it was i ended up back on the good old nimh/brushed stuff,seems alot less hassle than the lipo gear.
×
×
  • Create New...