Jump to content

mikef350

Members
  • Content Count

    161
  • Joined

  • Last visited

Everything posted by mikef350

  1. Hi all would any one be interested in trading my 1/8 Rc bike for a tamiya touring car, I am after one of the more modern front wheel drive or rear wheel drive with some hop ups fitted my bike comes with brushless system a fair few hop ups and servo uk only please
  2. Hi all I am after swapping my Schumacher cougar kc for a monster beetle or Blackfoot or nova fox buggy is in mint condition and comes with manual and a few spares
  3. Hi all got a couple of propper Rc helis up for trade one is a thunder tiger raptor e300 md500 flybarless which comes with a few spares and will need setting up properly to the dx6i eflite blade 400 pitch gauge swash level tool spektrum dx6i id like a rere sand scorcher ready to go but I’d consider other Rc cars also. none of the helis have been crashed although the blade 400 has had a slight blade strike but main shaft and feathering shaft are still ok. I can send more pics on request as I can’t seem to upload more than one
  4. Hi all Up for sale is a used tamiya xv01 which has only been used 3 times from new but has suffered from some marks on the bottom of the chassis as I’ve used this for rallying and the worst of the damage is the front right corner which has a tiny hole. Rite there's the... Xv01 does have marks as mentioned on bottom of chassis as it's been used but still in good condition and comes with interior,full hex ss screw kit,and tamiya hop up slipper clutch set plus lots of tuned springs. Spectrum dx3 radio gear hobby wing 1060 and torque tuned motor and savox metal gear servo with alloy servo horn and she runs really well with that set up. Etronix power pal balance charger and x2 lipos loads screws etc fastrax shoulder bag to fit the car in and has a separate compartment which has hudy hex drivers etc in price is £300 posted or collected from me I live in Brigg North Lincolnshire
  5. Hi all This is the last of my cars that I am selling the car is only a month old but it has suffered some scrapes and bashed due to being used with a youngster around. The car will be a roller only so no electronics at all and the centre brace is included it’s just not fitted in the pics. there is also a few sensible genuine tamiya hop ups fitted which are Alloy centre shaft and cups Alloy motor mount full bearing set tire foams oil dampers id like £100 posted
  6. Hi all I am after a tamiya xv01 to do some rally x with ive got a tidy X-ray x1 with some spare wheels and shells I’d like to swap roller for roller located in Brigg north Lincolnshire price is for any rules I am after a swap really £200
  7. Hi all Up for sale or trade is a Tamiya 1/16 tiger 1 which has had a bit of rear damage but is an easy fix.comes with radio gear and all works. Iam after a decent Tamiya buggy pref rere or cash Supershot rere Sand scorcher etc Can email pics direct to email as I can't upload at moment Cash price £250 located in Brigg north Lincs
  8. Hi all Would any one be interested in swaping a mint condition bianchi road bike for a full option rtr ww2 tamiya tank Bike is in superb cond and comes with carbon forks,carbon fsa cranks and carbon seatpost,shimano tiagra gears,shimano 105 brakes
  9. Hi all Up for sale is my good condition hpi rs4 nitro which comes with upgraded 2.4ghz radio gear with dual rates end points etc and rechargeable battery pack. Brand new hpi rechargeable hump pack Savox titanium gear digital servo on steering plus alloy servo horn New alloy tuned exhaust New racing clutch New fuel line all round with inline stone fuel filter Upgraded dual stage air filter Engines been looked after with after run oil used when been stored.also has loads of compression. All bearings are nice n tight New BMW m3 shell plus old basher shell and glow starters plus big tub of Byron fuel if cars picked up(located in brigg north lincolnshire) .theres couple new spare glow plugs also Price is £160 ovno posted no swaps
  10. Hi all Iam after a rere frog or hornet fitted with grasshopper shell.ive got a monster beetle to trade which comes as a roller with original new decals and comes as roller only
  11. Hi all Up for swaps is my brand new axial wraith builders kit with new rc4wd hitman beadlocks and rc4wd irok tires,plus the original r34 soft compound axial ripsaws tires and wheels and all the left over sprues,also fitted a rc4wd steering damper. Electrics fitted are axial ae-2 esc rc4wd boosted 35t motor savox high torque digital servo with titainium gears and 2.4 ghz radio gear I am after a rtr full option tank price is for any forum rules £400 located in brigg north lincs
  12. Hi all Recently bought this and after weighing up pros and cons i am going to sell it on and either put the money towards a full option tamiya or buy a heng long tank. Body has some detail parts missing and esc but comes with metal tracks and a futaba 4ch radio set. Located in brigg north lincs and id like £165 posted or poss trade for a decent heng long tank may trade for hard body cc01 like pajero or wrangler
  13. Up for sale i is my gmade r1 in very good condition fitted with a few hop ups,no electrics included (roller only) Upgrades include new ally centre skid Front cvd drive shafts Heavy duty steering links Alloy shock braces New axial ripsaws (and original tires) 55t axial motor Plus left over nuts and bolts box and manual. Located in Brigg north lincs And the kits are £220 plus new tires £33 £50 quid on hop ups and the rigs only had 1 run from new so price is £200 posted
  14. Hi all Had this fitted in my slash 4x4 but i want a 1/10 set up in there so up for swaps is my sidewinder 8th in good cond with a few scuffs on motor.
  15. Hi all No longer need them so they are up for sale £50 posted
  16. Hi all Was just wundering if theres a big improvement between the manta ray and ta03 ball diffs?
  17. Hi all I am starting up nitro racing next year so up for sale is my used but very good condition tamiya ff01 jaccs honda civic which has box manual and brand new bearing kit fitted and tuned road spring set,alloy heat sink motor mount. Electrics that come with it are 2.4ghz radio gear,tamiya super stock tz motor standard servo(not the one in pics) ripmax unlimited esc.Then theres a new in pack tamiya brushless esc and tamiya torque tuned motor,new in pack hpi ff01 lowering kit,some new in pack tyre foams (tyres not glued) Also i have some new in pack ff01 front universal driveshafts on there way to me but they will be a seperate sale as they cost me £60.Price i am after is £150 for the car would be interested in a trade with a good quality nitro rally x buggy like a losi 8 associated rc8 hyper 8.5 pro etc. Also trade for tamiya offroader
  18. Hi all Up for sale is my good condition venom gpv-1 bike which has front disc brakes fitted and trackstar brushless system. bike comes with program card,battery and transmitter but will need a receaver £100 posted
  19. Sorry for the thread revival but i was searching for ff01 hop up and came across this thread and someone mentioned super mini cva shocks for the chassis.if i buy some do i use my own shock rod from the kit shocks or use the rods that come with the super minis? and is this a big upgrade?
  20. Hi all As above £100 posted for new in box pumking lowride with new bearing kit and front and rear anti roll bar kit £100 posted
  21. No probs kev ive got some sorted now matey
×
×
  • Create New...