Pingman
-
Posts
62 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Pingman
-
-
1 hour ago, svenb said:
I have, where abouts are you?
Hi Svenb, UK mate
-
Lot one, anyone have a single spare?
-
18 hours ago, Fabia130vRS said:
Arent CVA dampers with oil? Yours on picture look like normal friction dampers.
17 hours ago, svenb said:Fabia is correct you have kit standard friction shocks
CVA shocks aren't expensive.
Oh that shows what I know (such a noob!)
13 hours ago, svenb said:I have the missing parts if wanted
Yes please
-
I have a set of CV shocks that I think are for the TL01 chassis (they came with one in the box) with two missing their retainer caps.
I bought a set of 50598 V-parts but the shocks end caps are different to the ones I have.
The 50598 has the screw on link recessed in the end cap (see 1st photo) but mine have them butting up sitting flush (see 2nd photo).
Can anyone advise which part I need?
50598 part 1/2 is recessed inside the end cap (the square bit of the screw on part not visible as recessed)
My CVA shocks have the part 1 from above sitting totally proud of the non recessed endcap.
-
1 minute ago, neverfollow said:
Yes sir
I happened to buy a TGX recently without an engine and having seen your electric conversion I am very much considering going down that route myself
-
On 4/13/2018 at 6:13 PM, neverfollow said:
Thank you Pingman! I've decided to keep this one as a shelfer/show piece since I have my other to romp around with.
That's fair enough.
The other being the electric one?
-
On 1/10/2016 at 11:45 PM, neverfollow said:
Happy more parts arrived
Electric starter:
Beautiful!
Any video running?
-
Thanks guys, I took a punt and ordered one anyway
-
1
-
-
https://www.emodels.co.uk/tamiya-1-10-rc-porsche-911-gt2-racing-ta02sw-47321.html
Shows it in one photo as having:
- FRP chassis
- FRP damper stay
- full bull bearings
- aluminium motor mount
- stainless steel propshaft
- cc-01 driveshafts (what's the advantage?)
Are these all included or just potential ugrades?
I've not seen any built or box opened!
-
thanks for help,
Turns out they're Integy High Mass Type 1.9 Wheel/Tire
-
I bought them for a cc01 Unimog that i'm now not building and can't remember what make/model they are
-
On 01/10/2016 at 9:09 PM, mtbkym01 said:
Any markings on the end bell?
No nothing at all
On 02/10/2016 at 1:43 AM, Backlash said:It looks to have quite a bit of timing, so that combined with the sealed can and bronze bushings my guess is that its a 27 turn stock motor from the 80's early 90's..
How does one know how much timing it has?
I was wondering if its a Tamiya dynarun or similar missing label
-
On 02/10/2016 at 10:07 AM, WillyChang said:
If they're 26mm originals supplied with RallyBlock tyres they'd be off the TB01
TAMIYA 58271 Subaru Impreza WRC 2001 Prototype 10-Spoke Gold Wheels
#0445837
There's a later issued 10-spoker of 24mm Medium Narrow width but I don't think RallyBlocks fit those.
Think these are the ones, cheers everyone!
-
I'm not sure if it's Tamiya or not but figured someone on here might know what it is.
Fairly basic silver can but has replaceable brushes, presumably label is removed?
-
Anyone know?
-
On 22/08/2016 at 7:40 PM, Tamiyabigstuff said:
Yes, I have all of those.
Drop me a PM.
Sent, thank you!
On 22/08/2016 at 10:45 PM, chickenman242tk said:You should be able to buy them in a bag , ta02 is still in production in somw form, desert fielder is 1 off the top of my head
Do you know any bag number or part number as I cannot find
-
Can anyone help? I cannot find them for sale anywhere
-
Hi,
I'm missing the parts to attach the rear shocks to the shock tower for my TA02 Celica,
MC3 x2
MC5 x2
MC8 x2
MC10 x2
Does anyone maybe have spares of them please?
-
Thanks guys, there weren't any original plastic ones on eBay at the time but one came up so I bought it
-
Anyone have a spare TA01/TA02 motor mount lying around?
-
I normally think the topforce looks a little unbalanced but your's looks great
-
Great engine cleaning technique, I must try it some time.
How is the commando coming along?
-
Thank you Pingman...it runs really well. At the moment, it's partially disassembled though. I removed the carbon upper deck and sent it to Fibre Lyte for copying. It's been discontinued for some time now, and I wanted one for my other TGX which I'm currently building as a nitro.
Excellent, I'm thinking of copying you!
Where do I get the motor mount from please?
-
I'm on the lookout for a TA02 RS If anyone has a one
92192 Tamiya TNS-FD Nissan GT-R
in The Builds
Posted
Done a cracking job of that