Jump to content

syncronized

Members
  • Content Count

    19
  • Joined

  • Last visited

Community Reputation

0 Neutral

About syncronized

  • Rank
    Newbie
  1. Hey guys, I've just recently sold my TL-01 on Craigslist and now I have a LOT of parts left over. Shocks, springs, body posts, C hubs, and a Speed Tuned Gear Set. What you see in the pictures is what you get. Everything is brand new except for the A-Arms and Shocks and Springs which are in excellent order. Shipping is free, so its $30USD obo shipped to your door anywhere in North America. Of course, if you're outside of N.America it'll be a little more. I only accept Paypal. Here are a few pictures...
  2. 2 x Trinity P2k and P2k2 Pro Motors Both very good torque motors. Bought new less than 6 months ago. Have just been reconditioned. Both are in very good order. Here are the specs... P2k copperhead RPM: 30,600-this is an optimal manufacturing figure, actual RPM will probably be lower and vary between samples. Power: 116.7W Efficiency: 70.7% Torque: 175N-mm (Newton-mm) P2k2 Pro RPM: 30,600-this is an optimal manufacturing figure, actual RPM will probably be lower and vary between samples. Power: 127.2W Efficiency: 67.7% Torque: 172N-mm (Newton-mm) $35 shipped to your door in N. America
  3. Driving with the roof facing upwards? That must be some sort of new driving style?? LOL Yah, what I've actually done is take the styling from my E-maxx and place a plastic brace between the 2 posts and I think I'll take your advice and clip them a little shorter. Because I've gone through posts and posts and used the drilled paperclip superglue solution to its end. Thanks for the quick note
  4. I keep breaking and Breaking and BREAKING my body posts. Is there some sort of replacement made of aluminum or some sort of alloy? I've searched everywhere. Are there interchangeable parts from other models I can use that are stronger/thicker? Thanks in advance!
  5. Hey guys, I've got a TL-01b that I want to use with certain wheels but the proline adapters that came with the wheels still don't provide enough clearance. Are there any parts out there, possibly from another Tamiya platform that allow me to use a longer rod that connects to the end of the dogbones? Here's a picture for a better explanation... By the way I'm using 12mm hex
  6. Hey guys, I'm thinking about picking up a Twin Detonator from a LHS but they only carry Wild Dagger parts. Are most of the parts interchangeable? Also, what's the speed of a stock Twin Detonator? Does it have alot of torque? How low can someone go in regards to motor pinion size? Can you use an 8.4V "flat" pack with it?
  7. Hey guys, I need a little help here. I just got in 4 new Venom 3800 NIMH batteries, whats the best way to charge them? I have a Dynamite Twin Peaks Charger that does 3 amps for 6 cell and 4 amps for 7 cell batteries at the same time.... And I have a Dynamite Prophet Charger that has selectable 1, 2, 4 amp charge rates. Should I charge with my Prophet charger at 1a? 2a? 4a? or just use my Dynamite Twin Peaks charger at 3a? and then maybe top up with a Prophet 1a charge? Please send me your suggestions Thanks in advance!
  8. Hey guys, I've got a brand new, never been used Associated LRP AI Super Reverse Digital ESC with Deans connectors. I bought it from my LHS and had them install the Deans connectors for me. Part.no. 83200 Motorlimit: Over 13 turns Typ. Voltage drop:0.106V @20A Rated Current:120 A Type: Forward/Brake/Reverse Size: 42.5 x 42.5 mm Voltage Input:4 - 7 Cells (4.8 - 8.4 V) Fail Safe: yes Automatic Setup:yes Limited Lifetime Warranty:yes $55 shipped to N.America.
  9. Ahhhh....I see. Ok, does the same principles you talked about apply to 27t stock motors. Because the motors need to be ROAR. Thanks again!
  10. Well I just got back from the Post Office and it seems that its pretty expensive to ship to the UK. Including shipping is roughly $35usd Thanks for showing interest!
  11. Hey guys, I bought this for $35 + shipping from Towerhobbies about a month ago and have used it 2 times for testing. It has already been properly broken in and includes a 16t pinion gear. Selling $25 shipped to anywhere in N. America. Thanks for showing interest!
×
×
  • Create New...