knotty

As daft as it sounds have you set it right?

can i just chip in. if finances allow why not just buy a mad bull? theyre cheap enough now

I had the pajero out for a blast in the snow yesterday. Just tried the magnum and its not much cop,just spins so im prepping the blackfoot for a quick blast.Mebbes get some pictures later

Aye i thought so when i re read it. if you look HERE though, and click on the m06 pro picture it brings both up.Odd

but will the front end need to be weighted to give the front wheels traction and stop understeer?

Just had a look on modelsports Website and it seems like a nice bit of kit.Not as expensive as i thought either only £146. Seems like a nice base to start building on. Not too sure on the mclaren mercedes version of it though. Wonder if theres a nice JPS lotus shell out there...... Actually ive just re read those links im and not too sure the mclaren is on the m06 chassis although modelsport have them both under the m06 grouping on the index page

Once again cheers Mark

Am i right in thinking a smaller pinion will mean faster acceleration and less top speed if you use the same Eg 14 tooth pinion with a 46 tooth spur will be quicker off the mark than a 21 tooth pinion with the same 46 tooth spur?

thats true but its finding a good one. HPi`s are ok but theyre lexan and not much cop for scale building and kamtecks are basic to say the least

Just had a proper look and the oil level seemed low. so ive toipped them up and it seems ok now. Is it just evaporation thats done it because i havent noticed any little leaks.And is it best to put them on stands when not in use?

Cheers mark

Lifted from another forum and a bit gruesome maybes but whats you kick the bucket wish list of stuff to do before you pop off? Doesnt have to be Tamiya related but obviously people will probably have some in there ,like have a complete collection of tl-01 kits relesed(although i suspect hank may have beaten us to that one!!) Dont know what mine are to be honest

Can anyone tell me why when the Pajero is sat on the table or the floor etc it lists to one side? When suspended off the surface the shocks are all the exact same length and nothing seems amiss. Could it just be the one side needing more shock oil?

That is nice. Love the colour on it

this stuff works brilliantly. supposedly a polycarb paint but i used it over halfords paint on my balckfoot and gives it a right flip. I used the jade chameleon and i think they do a sapphire and a silver and a plain green as well

on the main site in the reference section there you go click the manual tab and it`ll bring it up

This. Lunchboxes and Pumpkins are fun trucks not racers really and don't have the set up to cope with faster motors to be honest. Both of mine had sport tuneds in and the standard teu101bk esc`s and they were plenty fast enough for some really good laughs round the park.They jump nice as well

Thats a bit naughty of you Andy . I can now see another order for my third bowler shell going into kamtec after xmas Mind i`ve got a nice cc-01 chassis to sit this one on .Mmm ideas...... No wonder i get into so much trouble with her indoors

there was a thread on here where someone had been busy with pound shop torches. here you go It was for a midnight pumpkin but might give you some pointers

Today Mr Postman finally got off his backside and brought me a rather nice mardave caterham.Courtesey of BiggusDitchus

Not any more!!!

My pajero does it at full beans just off a silvercan. Haven't tried to remedy it because I find it sometimes helps to go at an obstacle at an angle and give it the welly to lift the front corner to help it step up onto whatever i`m aiming at

Not sure but I think they come on the trees that have the light reflectors on them,the parts they screw into. So you`ll probably need to look at the manual and get the part number for that tree and order the tree unless theres anyone got some lying around in the trades section. Or for a more permanant fixing you could always hold them in place with a smear of black silicone sealant.It sometimes is better cos it stops any light seeping out of the back of the reflectors

Well i got it going. Put a teu101bk in and a stock silver can and remembered why i do actually like the magnum as a runner despite loathing the build

Cheers Mark