BRELs

I used a pair of the bright white LEDs that go into the front fender on my Scania R620 as the back lamps and the used a set of the yellow LEDs that are for the roof lamps in their place in the fender in the outermost lamp slots, I have not fitted the roof lamps to the Scania

I painted the windows black on the inside on my R620, because I put the battery in the cab to give a bit more ground clearance under the truck, and had to leave out the cab interior

I have decided to move the battery into the cab to give a bit more clearance under the truck

nice work on the R470, I like the Purple colour on the unit

I have fitted 8 Carson fulda crossforce tyres to the rear wheels on the Scania and the traction has improved across grass, going to try it on dirt some time in the week

Some pictures of my Scania and Carson low loader trailer with a Jagdpanther load outside, the Jagdpanther is 1/16th scale so looks a bit small on the trailer

hi is this what you are looking for, it is the page from the manual on how to set up the tx to the DMD I have misslaid the little book that tels you what the functions are when you move the trim levers

I put a novack 55 in my Scania R620

nice truck I like metalic purple

Here is a link to a build project of mine on photobucket http://s231.photobucket.com/albums/ee277/b...%202A6%20build/ the Leopard 2A6 is finnished and a good runner and a panzer III project http://s231.photobucket.com/albums/ee277/brelewart/panzer3/ which is waiting for detail parts here is my Jagdpanther on a low loader pulled by my Scania R620

I use one of these sets in my Scania and it is a great radio to use, Also got one for my Leopard 2A6 and added the fire buttons to the top of the tx to make the main gun and machine gun fire

nice collection

still waiting for my tyres not any more they arrived this afternoon

yup, one of the better site for small screws and stuff

ah got it now I did not realise that you had not added the kit under the trailer as per instructions to mount the micro switches at the back of the kingpin plate, I thought that you were on about the switch that you can either mount on the legs or in the box under the trailer, silly me _________________

I bought a tamiya reefer and built it as a flatbed with the motorised support legs and I moved the king pin rearwards by almost the length of the kingpins plate less 10mm and mounted the switch for the legs in the box under the trailer where the batteries for the legs go good idea though

a great looking tractor

here is a link to catmand11r's ebay shop http://stores.shop.ebay.co.uk/prices-model...s__W0QQ_armrsZ1 I have bought some wheels and tyres off him I pair of supper singles and hubs to go on the rack under the reefer trailer and 4 pairs of Carson Crossforce Tyres to replace the stock tyres on my scania R620, I am going to leave the front ones as stock thanks for the idea about the wheels on the rack

ruzza those weights are too wide for the scania's wheel rims, thanks for the info because I need some more for my CR-01

thanks for the help guys I have bought some 9mm steel catapault shot and have put about 30 in each of the inside tyres and none in the outside ones and increased the trucks weight by about half a kilo with the dual drive axles if a wheel on the diagonal on oposite sides lift at the same time you have no drive because the wheels just spin, I will have to get some thicker grease for the diffs as well

I want to fill the trucks rear tires with some weight to improve the traction and get the suspension to work properly, can someone recomend a site where I can get the materials from to fill the tyres

got the second stage of the decking done I cut the balsa sheets into 17mm wide strips and glued the to the hard wood decking supports, I also staggered the joints in the planking, now all I have to do is put the planks on the headboard and stain the deck and paint the frame

nice work

I have bought various kits and add ons from Hong Kong and had no problems at all,

change of plan I have removed the grey deck suports and glued stripsr of 9mm hard wood on the aluminium under deck and pinned aloy side pieces back on and am going to glue the balsa strips to the hard wood