Jump to content

dhonda200

Members
  • Content Count

    45
  • Joined

  • Last visited

Everything posted by dhonda200

  1. Hi, i was woundering if those old aristo craft motor conditioners work well> Also what can u do with them?
  2. well i want a buggy mainly for street and on my track i made. But i want to make sure those cars work good. Because i had a rc10gt and had nothing but trouble with it.
  3. Hi, i was just curious if anyone knew anything about the nitrorcx nitro cars. exceeds 1/10 with a vx.16 motor. Do they run good? start good? how are the pull starts do they break allot? http://www.nitrorcx.com/gas-nitro-rc-buggy...n-99-bucks.html
  4. o by the way how could it have 100 plus amps by dead shorting?
  5. well for my birthday i got some old batetries on ebay and i fixed them up cleaned them wrapped them and charged them up they have so much power i have a couple 1200's and a 1400 matched. im curios the disdraw amps, some people beleave there 40 amps so idk im just anxios to know.
  6. who know how many amps the old sanyo 1400-scr batteries put out because i have like 4 of them and there probly the best batterys i have.
  7. well mayby its the gearing, the gear box is fine. Hes running it in his stampede and im running mine in my xtm xcellerator. Its a vintage precision bad animal 27t motor. So mayby it cant handle the big tires altho idk y it couldnt?
  8. ive always had good luck with cleaning everythign with a brush and laquer thinner. expesialy the bushings. Then id clean the comm with some 220 and keep doing it till the comm is all ligth colored then go over it with 1200 untll its smooth then i use aluminum billet polish to give it a gloss. oil the bushings too
  9. yea i ran it in the air it seemed fine in the air didnt over heat i sold it to my friend and he has it in his stampede now. it dosnt over heat imidiatly it takes time . I chanegd the brushes before i sold it to him so they look like new not warn at all altho there out of a diferent motor. the comm looks fin not burn't, and its nice round flat. bushings are fine ive oiled them too. so idk if u have sugestions i have the same motor in my truck and mine runs cold and has more torque then his.
  10. Hi my precision 27t motor dosnt seem to have any power and keeps over heating when i use it i was woundering if anyone knew why?
  11. Hi, i was woundering what shocks i should put on my newbright rc snowmobile?
  12. hey does anyone know about the associated reedy challenger 19t motor are they quality?
  13. well actually i want a motor that will make my rc stadium truck do wheelies and go like 35mph or more?
  14. Whats the highest torque motor u can buy for a stadium truck somthing that can make my stadium truck do wheelies.?
  15. yea ive taken it apart it looks like brand new?
  16. yea i tried other things the motors still messed when u plug it in it goes buuuuuuuuuuuuuuuuuuuuuuuuuuuzzzzzzzzuzuzzuzuzuzu. dosnt turn over well some times it does but not fast and when its not pluged in it does turn over by hand so idk its so annoying?
  17. well iw as loking at it and tour it apart it has the washers inside so idk wierd ill try it with my xl-5 esc and see how that goes i wounder how many nnm of torque it has probly over 200
  18. o ok thanks alot, my only problem is that it was actign up when i pluged it into the esc the esc ran rlyl hott and the battery conector got rlly hott and the motor didnt seem like it was running rite idk mayby the esc cant handle the motor its an old novak explorer 16t and up it should handle what do u think is the problem cus the motors brushes i swear look like new the comms fine bearings seem good?
  19. PRECISION MOTOR WORKS--BAD ANIMAL (3) COMPETITION MOTOR, OUTLAW 44 MAGNUM (1), MADMAN'S NITRO EXPRESS (2), ARMAGEDDON CLASS What are the rpms torque power of theese motors?
  20. thanks will my rc10t do wheelies with it u think?
  21. What are the rpms, torque, and watts of a vintage spedworks 427 16x2? Thanks, Derek
  22. lol thanks, does any one know what motor those came with from the factory and the top speed of them.
  23. o wow thanks alot that really helped me now i have parts diagrams sweet thanks,again. is there any place that says liek the weight lenth width stuff like that
  24. does anyone have the specs of an old rc10t?
  25. yea i know i once used my friend reedy 17x2 motor with a duratrax 18t and above esc it worked fine but the motor fried lol
×
×
  • Create New...