Jump to content

Camel

Members
  • Posts

    114
  • Joined

  • Last visited

Posts posted by Camel

  1. Preferred is totally the wrong word here, it's illegal to run anything ground based on 35mhz as it's reserved for aircraft.

    It's illegal to run r/c cars in the UK on anything but 27mhz, 40mhz or 2.4Ghz.

    If you are caught running on any other frequency the police will confiscate the equipment.

    Thanks for all the help. somewhat clearer now.

    As far as the police are concerned........ they won't even turn up to burglaries etc.

    Thanks.

  2. I didn't want 4ws so I bought those to replace all of the steering parts. When you build the axles, you build them as the same, with exception to the clocking of the knuckles, inc the rods between the knuckles etc... with the exception that you make up a lockout rod instead of a steering rod. Have a look ing the manuals section of the kit. You'll see what I mean.

    BTW, been thinking about selling mine.........

    I haven't seem a manual yet, there's not a scan up yet & I'll still saving for my own - hence selling heaps of parts on the 'bay & in my traderoom.

    Thanks

    ps how much are you "thinking about selling" yours for? hypothetically, of course!

  3. No prob's :D

    I run mine with the rear locked out utilising Junfac adaptors.

    Ok, ummmmmmmmm.............. why? If there's a way of putting 4ws on it, doesn't tamiya provide regular 2ws parts? - or are they not man enough?

    Next silli q. Looking at your FJ in the showroom, you've got ally ends on the axles - it that a strengthening thing too?

    Not having a CR-01 (yet) I feel I should be asking heaps of daft questions now. The really stupid q's will come later :)

    Thanks

    Neill

  4. Tes, the intructions indicate how to do it. The rear axle is ready and the kit comes with all the mounting parts etc....

    You'll need a servo, a "Y-lead" to go into one chanel on your radio set or a multichanel radioset to have indipendant steering as you might have on a Clod/TLT/TXT crawler.

    Excellent. I'm hoping to get a multichannel set so that I can use the rear steer as and when I need.

    Thankyou for the quick response.

  5. Drop me a note is any one of these

    Pictures available if required.

    In UK.

    58204 Blazing Star - Complete Kit NIB

    Technigold motor

    5312-600 Technigold Brush Sets - Retail card

    op44 53044 Dynatech 02H Motor SOLD - Payment Pending

    Aluminium Alloy Wheel Set (4) All

    Celica '93 Monte Carlo Body Shell & Spare J Parts

    Proline Hummer H1 Body Shell - Black Metallic, Tints & light blanks

    005598 Taisan Starcard Porsche B Parts (Rear gear case)

    005598 Taisan Starcard Porsche B Parts (Rear gear case) Incomplete

    op37 53037 Hi Cap Dampers (Short) (NIP)

    op37 53037 Hi Cap Dampers (Short) (Partially Built)

    op54 53054 Hi Cap Dampers (Short) Spring Set

    op70 53070 Manta Ray Ball Diff set TA01, TA02

    op71 53071 Manta Ray Torque Splitter Set TA01, TA02

    op79 53079 Manta Ray Stainless Steel Propshaft Set (NIP) TA01

    op79 53079 Manta Ray Stainless Steel Propshaft Set New, no pack TA01

    op99 53099 FRP Chassis Set - possibly complete TA01

    FRP Chassis Set - used TA01

    FRP Chassis Set - built TA02

    FRP Chassis Set - used TA02

    op109 53109 Turnbuckle Shaft Set

    op127 53127 Skyline Speed Tuned Gear Set TA01, TA02

    op141 53141 4WD Touring & Rally Car Lightweight King Pins TL,TA,FF,M09,M04

    op142 53142 4WD Touring & Rally Car Aluminium Motor Mount (NIP) TA

    op142 53142 4WD Touring & Rally Car Aluminium Motor Mount (New partial package) TA

    op142 53142 4WD Touring & Rally Car Aluminium Motor Mount (New? no package) TA

    op142 53142 4WD Touring & Rally Car Aluminium Motor Mount (Used) TA

    op145 53145 Touring & Rally Car Urethane Bumper Set TA01, TA02

    op152 53152 Short Type Hard Propshaft TA02

    op152 53152 Short Type Hard Propshaft (Used) TA02

    op155 53155 Low Friction Aluminium Damper Set, 4WD/FWD Touring & Rally Car

    op164 53164 Touring & Rally Car Hollow Carbon Gear Shaft Set TA01, TA02

    op191 53191 4WD/FWD Touring & Rally Car Turnbuckle Tie Rod Set TA,FF

    op192 53192 4WD/FWD Touring & Rally Car Turnbuckle Upper Arm Set

    op194 53194 Touring & Rally Car FRP Rear Damper Stay TA01, TA02

    op200 53200 One Way Front Diff Manta Ray TA01, TA02

    op218 53218 Touring & Rally Car Hard Joint Cup Set (Gear Diff) TA01, TA02

    op225 53225 Touring Front Universal Shaft Set (Inc. Hummer) (NIP) TA02W

    op225 53225 Touring Front Universal Shaft Set (Inc. Hummer) (Opened pack) TA02W

    op225 53225 Touring Front Universal Shaft Set (Inc. Hummer) (Used) TA02W

    op226 53226 Touring & Rally Car Aluminium Front Hub Carrier TA01, TA02

    op244 53244 TGX Carbon Propshaft (TA01) TGX, TA01

    op252 53252 TGX Rear Aluminium Upright Set

    op303 53303 TL01 Adjustable Upper Arm Set TL,FF,WR02, Stadium Raider

    op390 53390 Hollow Carbon Gear Shaft Set M03, M04, FF

    sp336 50336 Thunder Shot Drive Shaft

    sp336 50336 Thunder Shot Drive Shaft (Used)

    sp603 50603 TGX (TA01) Stainless Steel Propshaft Set NIP TGX, TA01

    sp603 50603 TGX (TA01) Stainless Steel Propshaft Set New, no pack TGX, TA01

    sp883 50883 Drive Shaft 39mm

    Aluminium Front Knuckle Set (No Packaging) TA01, TA02

    49244 Aluminium Ball Nuts (blue) 5mm Pk.10 All

    50646 Touring & Rally Car D Parts Set (Arms & Body Supports)

    AR Products TA-18 Aluminium Propshaft (NIP) TA01

    AR Products TA-18 Aluminium Propshaft (used) TA01

    KOSE K1101 Hard Jiont Cup Set TA01, TA02

    KOSE K1960 Front Adjustable Camber Set - All touring cars

    KOSE x1907 Super Steering Set - All touring cars with stock chassis

    KOSE K1904B Aluminium Servo Mount (blue)

    CROSS TR19 Steering Set (TR-15F-R) TA01, TA02

    GPM MT030 Aluminium Rear Damper Stay (red) Celica TA01, TA02

    GPM TA1110 Front Stabilizer Complete Set TA01, TA02

    GPM TA1022 Aluminium Rear Knuckle Set (blue) TA01, TA02

    GPM Aluminium Front Damper Stay (Silver) Celica TA01, TA02

    GPM TA3241 Alloy Universal Shafts (blue) 41mm

    GPM MD049 Alloy Steering Plate (3x6mm bearings) Gold Manta Ray TA01, TA02

    GRAUPNER TA1028 Alumunium Front Damper Stay (w.collars) Blue TA01, TA02

  6. Shooot me a price on the one that looks new. If possible can see a pic of it please

    Hiya,

    I've now got a hewge list of stuff that I've just gone through & pictured etc. I'll put up pics as soon as I can. Not really sure how much these are worth though, so I need to do some research - unless I get some unbiased advice. :blink:

    Neill

  7. How much were you looking for?

    TBH - as much as possible :lol:

    I'd sell them seperately, as they seem to span the condition spectrum from, used, to molly coddled.

    It's obviously difficult to benchmark them against anything, because I can't find many about for sale, so some unbiased guidance would be helpful.

    I would like a deal where both parties feel they've done well. If it seems to be a hassle, I'll just put them on the bay, but would prefer TC guys to get first nibbles.

    thanks

  8. I've been rooting through the garage & found 3 Technigolds!

    One looks mint & unrun, but without a sticker for some reason! - could even have been pulled from a shelf queen (I think it's been fitted).

    The second looks healthy & intact

    the third looks like it's been run a few times

    I've also found a complete retail sheet of 3 brush sets for these.

    I will be parting with these if there's interest.

×
×
  • Create New...