neil1983

I've got a Mighty Bull that I picked up very cheap a year you 2 ago, I think its good fun. Here's a link to mine, http://www.tamiyaclub.com/forum/index.php?...mp;#entry415799 And here's a link to my vid on youtube, http://www.youtube.com/watch?v=CWYXk50fTG8...DPqicoHAJ18NbOD

http://cgi.ebay.co.uk/Tamiya-Juggernaut-2-...=item3368762594 Offers welcome

Tamiya TL-01, Subaru Impreza shell with LED's Tamiya TP-R132JE receiver HPI TF-1 transmitter Crystals Ace RC veloci RS ESC Clash 18t motor Spektrum Z270 steering servo Tamiya RC1400SP battery Riko charger, with home & in car connection Alloy adjustable shocks Blue alloy C-hubs Blue alloy wishbones Blue alloy camber arms Blue alloy prop shaft Silver alloy front & rear knuckle's Full ballraced This has only been used a couple of time since I built it, has some marks on the underside of the chassis but other than that it is in very good condition. It is RTR and works perfectly, and its quite quick. £60 +p&p Now on ebay http://cgi.ebay.co.uk/Tamiya-TL01-Lots-Upg...=item336868a5d9 now sold

Took the might bull out, excuse the camera work, it was taken by my son

Alloy shocks, tyres and servo all fitted, the tyres still need glueing one but other then that its complete

I had this lot arrive yesturday and today, new tyres, alloy shocks and the losi LOSB0812 Extra High-Torque Digital Servo Might start fitting this little lot later

I decided I wanted to change the wheels as I want too keen on the standard ones, so after looking on ebay I found these traxxas 2.2 wheels with 12mm hex. I've got to get some new tyres now as I destroyed the ones on the standard rims while tring to remove them. Couple of pics with the traxxas rims fitted.

Alloy shocks/dampers ordered. Here a couple of pics of the chassis with the ezrun system fitted Also I'm after some newstandard bodypost/mounts, anyone have any idea where I could get some from, I've tried ebay but not managed to find any.

What adaptors do you mean mate? Any links to any recomended wheels?

Is the suspension from the wild dagger/ twin detonator the same as the mighty bull?

Its got the standard dampers still fitting which I will be upgrading to some alloys shocks Pinion gear is a standard one so I think that'll be another upgrade on the list

Some time last year I bought a Tamiya Mighty Bull from at local auction, It came with motor, esc, servo ect but most needed replacing as they were faulty. This is ow it looked when I got it, I have it a clean and fitted another esc, servo and a clash 18 motor Here's a short vid of it running And thats how it stayed up untill about a month ago when I ordered a 10.5t ezrun brushless combo Here's a short vid of me testing it for the first time with the ezrun fitted Thats how it stands upto now, but I have some more things to do to it, I have got a bearing set on order and I've got a LOSB0812 Extra High-Torque Digital Servo on order for the steering. I do have a couple of question too that someone might be able to help me with, Firstly, what other upgrades/hopups could I do to it? Secondly, I've been looking for some diffenent wheels but not been able to find any, does anyone have any surgestions?

That looks smart mate

I dont use the drifter yet as it isn't finished, still needs a motor, esc, transmitter & receiver to get it running, but I just do bit to it when funds allow. I'm not 100% sure what scooby shell it is, I found it cheap at a local boot sale last year. Here's some more pics of it and the bits I've done to it,

Tamiya Might Bull, another local auction buy Tamiya Baja King, another local auction buy My girlfriends TL-01 Raider, sat next to the juggernaut at xmas I've also got a Tamiya TL-01 project going on, turing it into a drifter, its got pretty much every alloy suspension available, alloy prop shaft, ball raced here it is with its shell on

No more mods or restoration done to the Juggernaut, I have hanaed to use it a couple of time so far this year when it hasn't been raining. I took it out in the snow which it seemed to cope with without problems And also when it was warmer and dryer, this wa the first time using my new Vapexech 3700mAh battery

http://shop.ebay.co.uk/9921neil/m.html

Cheers for the info and help mate

Cheers mate Do you have a link for the shocks? And where can I get a ballrace kit from?

Can anyone reccomend some cheap upgrades/hop-ups that I can do on the jugg? Also does anyone know where I can get some red highlift shock from?

Cheers mate

Cheers mate I haven't got any other pics of the tigra mate, I'll try and get some soon

Cheers mate

Cheers mate Yes it's my sisters modded tigra

Update, I had the idea of removing the stickers and replace them with new ones as they were starting to look abit gruby, but as I removed them it took the paint off too . Anyway I then decided to get the whole shell resprayed, the colour wont be to everyone's taste but I like it. The ESC also turned up and I fitted it and tidied up the wiring abit, all the connections have been soldered properly and not bodged I also managed to get a small vid of it running