mastino

M-07 Concept chassis to be continued...

engaged on two fronts HPI Venture FJ Cruiser, RTR but completely disassembled and reassembled, new tires, new link (SS and alu), new servo. Tamiya m-chassis m-07, being completed, lot of Tamiya and 3racing hop up in memory of Badboy

here is my little contribution Damper mount is a separate set made by GPM Alloy Rear Damper Mount With Mulitple Holes-1set - GPM CC030MN and seems the new damper set is a little different...

no, it's not necessary. Using the lipo for space problems, but motor and ESC brushed.

Just for info, fully compatible with trackstar D-Spec TS4G transmitter (obviously except the gyro function)

Just some notes: The REAR upper link 46,5mm are self made ( SS tube DIA 6x4mm + M3 threaded bar). Other link are from the original kit. On the rear ALL the uniball 25mm was changed by uniball 20+3mm spacer (total lenght 23 in place of 25). Uniball 25 from the MST kit, uniball 20 from TRAXXAS (part#2742, not 2742X)

65T C4WD in my CCopier

I've bought just a few of spares... but now I have: a "special purple" Vanessa's Lunchbox and a brand new upright for my Astute

So, this morning, BE QUICK OR BE DEATH. Tyres: RC4WD Rok Lok 1.9" 114mm external dia. Driver : C Viper (Crimson Viper) from Street Fighter 4 by NECA

first test

MST CFX-W completed just now. Six months of tests and modifications to adapt it to the JK body; ok, I was not very assiduous, not even fast... now I'm almost ready for the next step with a new Tamiya model; 2wd, front transmission, small wheels...

take a look for the instruction; I don't know if it's the correct one ipc sport manual ipc sport LRP pdf from site

small steps forward with the cfx-w lately, one step forward, one on the side and two backwards. Happy New Year everyone!

Buon Natale e Felice Anno nuovo. Merry Christmas and a Happy New Year.

as my english is not perfect, I have some difficulty expressing myself correctly. I will do my best, with the writing (and the kit) and I will take lots of photos.

tamico box also for me M-07, mx-5 body, tyres and some bits and hopup.

it's Christmas time

I'm in search for info for a friend. He drove years ago a TA02 chassis with Alfa155 V6 body. Now he want to relive those youthful years with a fresh similar model and he bought a TA02sw. The question is simple, which parts are necessary to modify the SW wheelbase (236 mm) to 257mm as in the regular TA02? Thanks.

Tamico strikes again! Order items: 1x Tamiya 58647 M-07 Concept M-Chassis Bausatz 1x Tamiya 51583 Karosserie-Set Mazda MX-5 M-05/06 2015 1x Shimizu Treaded Tyres for Tamiya Mini, M-Chassis -Soft- 1x Tamiya 54787 Alu Querlenkerhalter hi./+0,5 blau M-07C 1x Tamiya 54766 M-07C Alu Counter Shaft (extra leicht) 1x Tamiya 54767 M-07C Alu Hauptgetriebewelle (extra leicht) 1x Shimizu Treaded Tyres for Tamiya Mini, M-Chassis -Medium- 1x Carson Pinion Gear Module 0,6 steel, 20T 3x Tamiya Alu Gewindestange 3x18mm (2 Stk.) blau #54247 2x Tamiya Kugelpfannen 5mm (8 Stk.) #50797 1x GPM Alu Radmitnehmer 6mm (4 Stk.) für Tamiya DF-03 / T... 1x Tamiya H-Teile (Spoiler) Nissan GT-R #9005899 1x Tamiya Alu Abdeckung Kegel-Diff. für TA06 / XV-01 / FF-... 1x Yuki Model Reifenkleber dünnflüssig 20g And again, the badboy star will never fade, like this thread.

First batch of Christmas gifts m-07 related.

At the end, I decided. For Christmas, a new model to build. On the way, a lot of hop up for the new M-07 Concept Chassis. I will order the model tomorrow, perhaps with a beautiful miata (mx-5, roadster) body, tires and other option parts. My personal Christmas gift.

you can do this simply test: remove pinion from both the motors and push the models. Verify that they slide the same way. You can therefore understand if it is a mechanical or electrical problem.

Mine is a cfx-w. Due to the shortening of the wheelbase I had to cut the sliders

HW WP1080, hackmoto 45T, undecided about servo.

I'm working on a MST CFX-W... i've reduced the original MST wheelbase from 300mm to 275mm about to match the wheelbase of the JK body