Jump to content

Danielson

Members
  • Content Count

    26
  • Joined

  • Last visited

Everything posted by Danielson

  1. Well I thought I would post a little update.. I am still waiting for my alloy wheel hex's and kingpins to arrive from Asiatees.. So no pics of those fitted.. But I have fitted new turnbuckles. Now the car is looking so nice with the new gearbox cases and alloy parts fitted, I have decided that I dont wanna use it anymore.. So its back to being a shelf queen. I will look for another chassis to fit my electrics in.. Something a little more up to date I think.
  2. http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...em=300578354279
  3. http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...=STRK:MESELX:IT http://cgi.ebay.co.uk/TAMIYA-TA02-FRONT-C-...=item45fb5558e1
  4. Hi peeps, got the above on ebay. http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...=STRK:MESELX:IT Cheers, Dan.
  5. Looking good! Nice to see another clean TA02
  6. So I got the new gear cases fitted, had the car completely apart and cleaned every piece.. I think it's looking pretty well now. I ordered a pack of 3x10mm (black) screws of ebay as a few are now looking a little shabby.. Hopefully the wheel hex's and Alloy C hubs will be here next week.. Next purchase will be the alloy rear Knuckles and the rear ARB kit, maybe some adj rear upper arms and universal front driveshafts too.. It seems I have well and truely been bitten by the bug again. Cheers, Dan.
  7. Just got a great deal on a set of Top Force A and B parts, will be here tomorrow.
  8. Nice one, thanks for the info guys!! I finally got my alloy knuckles today and fitted those. Very nice quality, so I ordered the C hubs and lightweight king pins too. Hopefully get a chance to run the car at the wkend.
  9. Hi peeps!! I would like to buy the black/grey gear cases. Can someone tell me what other cars use these. Ive seen some for Top Force/Manta ray etc.. Not sure if they are the same? I am aware that the Ford F150 uses the same as TA01/02.. Cheers in advance, Dan.
  10. Very nice.. swap the rear tyres over though.. you got them the wrong way
  11. Hi Craig.. I havent ran it as yet, I did hold the car and give it a blip.. Might be a little quieter than it was, but its hard to say tbh. Cheers, Dan.
  12. The drive shaft came today, and I just fitted it.. Did you use the O rings? As it seems very tight with those in place, So I left them out for now.. I noticed that the cup where the driveshaft fits in was catching ever so slightly on the front gear case, so I took a blade to it and trimmed it a bit. I should be ready for Lipo power now.
  13. Any suggestions on what charger?
  14. Got it on order, was hard not to get carried away and order loads of bits.
  15. Now we talking.. Thanks again Mark.
  16. Cheers, I had noticed it wobbles around.. And was thinking of replacing it also Can you link me to one Mark? PM if you can't link in the thread. Edit, found only the dogbone style ones on AsiaTees.
  17. Ok.. Jesus I am confused. I tried to search for the yeah racing packs you mentioned but no luck.. will edit my post and remove the links to ebay.
  18. Thanks for the info. So it has to be 3200 mAH? Or can be higher? Cheers, Dan.
  19. Hi peeps!! I'm a total Lipo newbie, so after some advice. I am running a 5.5 T 3650-6000KV EZRUN setup and currently using some Intellect 3600 nimh packs. What sort of Lipos should be looking at? Cheers, Dan.
  20. I didn't buy them to remove slop from the steering. I bought them as one of the original knuckles has snapped and been superglued back together where the ball connector screws in. Thanks for the info regarding the FRP and carbon chassis plates.
  21. Whoops, I meant front knuckles.. Thanks for the advice.
  22. Cheers for the nice replies guys. These are what I ordered.. http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...e=STRK:MEWNX:IT I was looking at the alloy steering parts as I notice a little slop in the steering. I am also tempted by the carbon chassis decks, but havent seen the battery holder anywhere. If I could find that I might go ahead and get the carbon decks. I replaced the rear gear casing as the other had some damage to it. I think I will end up replacing the front case also as it has faded and looks a touch orange in comparison. If I can persuade the missus to come along next time I run the car I will get some video of it in action. Cheers, Dan.
  23. Awesome vid mate, looked wicked fun! What camera was used to film it?
×
×
  • Create New...