-
Content Count
3963 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Everything posted by matman
-
Boomerang steering throw/front driveshaft binding
matman replied to Saito2's topic in Re-Release Discussions
Maybe they had an abundant amount of them possibility ? and it was cheaper to make , as No alloy part and having to press the ends together ... And the rear used them anyway and had to make ... -
Boomerang steering throw/front driveshaft binding
matman replied to Saito2's topic in Re-Release Discussions
Not in Original as have been said above . They worked fine on the boomer , I had a few boomers and still do . The re re had two and some people put in the wrong one in a complained it binding , till they were pointed in the right direction . So i was pointing out there are too types of uprights and some one may have put/given you a wrong one ? possibility .... Trying to help you out , to find the possible problem .. Or you may have a slightly bent dogbone ? ... -
Boomerang steering throw/front driveshaft binding
matman replied to Saito2's topic in Re-Release Discussions
Front uprights ( steering arm ) are different offset on boomer too hotshot ... Hotshot short dog bones Boomerang long dog bones . Boomerang came with TWO Front uprights ( steering arm ) in kit , the manual said what one too use . for boomer .. -
Grasshopper/CW-01 gearbox outdrive adapter - 3d printable.
matman replied to Ziddan's topic in TC Designs...
miniguy71 has some great stuff , on Thingiverse.com . I have been printing his diff setup for Grasshopper stuff for a week or so . Did some last year as well , the front end . Did some WO parts as well . So thanks , look at your setup . thanks . -
WOW , very nice . Great 3D design's you have on thingiverse.com . I will have to print some of them , thanks . Great paint job , wheel arches are a pain , but sand paper to smooth it out .
-
Wow , isn't funny . 3D petg temp 220- 260 degs . looking great @yogi-bear . So ya still 3D printing much . . Not been on tc much , much like u , gee last update April 24 2021 . You have been busy . hi all
-
Fantastic little project . Great too see it finnished and see it running . Thanks ..
-
Well thanks , came out great on my inventer , having trouble with my ender 5 pro at the moment . That will print the back part . So thanks .
-
Thank you , will be good to print it . It's some thing we don't see on cars much theses days , In the 80's 90's they were on alot of cars had them . I had them on the old MK 1 Escort , MK1 Capri . MK 3 cortina . Making a mini one will be great addition to the SS . Thanks ..
-
Nice , do you have it on thingiverse of your updated one thanks .. Would love to print it my self . Looks fantastic , great job ..
-
Ampro is pintopower .. Has some great stuff ..
-
@moffman Looks like your one lol . Nice Avante @Pablo68 , are you going to run it ?. 2011 model , so it should be good to run .
-
You got the Australian model . ...
-
Feedback on my 3D Printed Stuff, please. :)
matman replied to VagabondStarJXF's topic in TC Designs...
The famous Benchy , there Are more different versions of this now . Looks like it came out great . Nice and clean .. -
Which avante shell on a egress/vanquish
matman replied to Augustin's topic in Vintage Tamiya Discussion
2001 Avante body is needed for the egress chassis . As the egress chassis is longer . -
Very nice job Re-bugged . Came out fantastic , so whats your next truck going to be ..
-
Been 3d printing like MAD , 3D printed Avante 2001 rims . Been trying to get it better finish . I'm getting there great guns now , got a few lol . Just finishing off the last white rim now , i used natural filament ( looks like white ) on the 2001 pic . So i will change that .
-
Feedback on my 3D Printed Stuff, please. :)
matman replied to VagabondStarJXF's topic in TC Designs...
Abs is a pain to use , UHU stic ( Blue ) is what i used . On glass bed . But Raft is good also . and both can be applied if needed . I try not to use raft , as more to clean up , of course . But some times needed ( i use as last resort ) I also use ( 3DLAC Plus) it's an Adhesive spray for 3d printers to prevent warping great stuff . Mind you not cheap , but works . Hair spray is some thing other people use , not sure what brand ? As i have not used it , But the 3dlac smells like it of sorts . Maybe google it and see what you have in your country ? .. I have some prints look great and then start to warp sadly .. Nothing worse , as it can screw the hole print . So give them a go ?. I have CTC printer that i used the UHU Blue on and worked , with glass on bed . Inventer , i don't have glass bed . But i use 3dlac . Ender 5 pro not glass bed , but i use 3dlac . Let the print and bed cool and most of the time the come off , some times i have to tap it to get it off lol . But they do come off , NO warping .. Good luck . Ok , uk site for 3dlac https://www.amazon.co.uk/3D-Adhesive-Anti-Warping-Spray-Printers/dp/B01HQ4KXZ4 -
The 1st one of 3 that i want of the VQS . Let alone the MK2 Escort i want 3 of .. Need a 3rd or 4th job to pay for them all lol.
-
Don't post address here PM them . As people can see it , you don't want that . PEOPLE , DON'T POST ADDRESS ON FORUMS . I SEE THIS ALOT . AS YOU DON'T HAVE TO BE A MEMBER TOO SEE POSTS ...
-
Good to see you back ! . This thread has never been the same :LOL: ... Hope is all well ..
-
Ok done for now . May change it ? Time will tell . Now need to make and STL file and print it woohoo , so happy i managed to get this far .
-
This is going to be about 1/2 hour job , need to finish off . Starting to get the hang of this Autocad stuff . So this was my next challange CRP boomerang , hotshot etc front brace . Just need to curve ( fillet ) the ends . Then i can print . This is my 1st draw for RC . I'm sure i will need to make changes lol .. Been trying to Autocad draw for a few years and of course it won't work/turnout etc . Get peeeeeed offffffffffff And stop . But been woring on it and watching youtube over the last 6 or so months . I will print it in PLA 1st ( all i have at the moment ) will look at ABS , petg or nylon maybe , But that's for another RC cad day HAHA ..
-
Not that much in it ..