mr nice

SOLD

Used chassis with usual scrapes underneath,no splits or breakages.shell is in decent condition with very minor splits on front and rear bumpers, and driver cockpit decent too. 1 brand new set of tamiya rally block tires unglued on focus rs rims also new. 1 set of glued multi spoke on road brand new wheels/tires. 27T tunable sport tuned motor with 19t pinion gear. Mtroniks sniper 12t water proof programable esc with instructions. Ansmann 3kg water proof servo. Fully ball raced. Comes with 2 channel stick 27mhz controller with duracel new batteries. Plastic dust cover. Almost a full chassis in spares,all thats missing is 2 dog bone swing shafts I think. Ansmann delta peak fast charger. Carson 3000 mah battery Orion 3300 mah Ansmann 3700 mah included.

please let me know what you have

sold

Update i have found instruction manual. I can take to post office and get you a price on saturday if you would like .

What ya thinking?

Nar sheeva from resident evil athough she does get stopped in the street alot from people who think its lara lol

SOLD

as above also fully ballraced with 3kg 0.16 sec servo,only built last wednesday with instructions and all spare parts no box sorry. instructions and program card with35 amp 9t ezrun.aly prop shaft and cups, aly motor heat sinc anyway pics 2s 5ooomah turnigy lipo, upgraded gears, i have exactly same setup in my other one very very fast. no tx or rx included. £100 posted

Ok im selling my cc01 .Dont want to spend any more money on this only for it to get slung at back of cupboard when i get new rig. chassis is chopped in all the right places 70t motor and matching esc 9 kg steering servo ali motor mount 4 link kit ball raced front ali arms and knuckles cvd drive shaft thingies for better front steering ali steering mount ali steering upgrade winch-needs attention 2 wires soldering. weighted wheels 6 hours run time max 1 landrover disco shell box and instructions spares from upgrades. £160 posted Thanks for looking

Landcruiser shell custom built, it has moving steering wheel from servo installed behind dash with figure, requires own fixing/mounting-i used velcro £33.20 deliverd

Whats the chances of a meet this year?

esc's, srb wheels and tires, body shells. click link to ebay and then 'see other items' i will end anything thats not been bidded on if theres something you fancy. http://www.ebay.co.uk/itm/Rc-body-shells-escort-cosworth-cossie-focus-rs-ford-1-10-/251216728244?pt=UK_ToysGames_RadioControlled_JN&hash=item3a7daf10b4 thanks for looking.

The last couple of weeks ive been lightening the load of cars trucks buggies etc so i can get other stuff finished and then chassing my tail by starting something else 'well you get the picture'. So i have got rid of half projects and plan NOT to impulse buy from ebay and waste money! I have only now.. my half modded CC01 which i want to upgrade more my re re hornet could do with a revamp my mini needs putting back together my daughters mardave needs finishing the tt01 is all good and finally my turnigy sct kit will need building when arrives this week(xmas pressie to myself). My next rc will be in july for bday.

unglued tires have been lightly used and had every other tread removed for better grip and rims are new and only every been fitted for pics and a 2 min run. £20 posted Posted Today, 12:31 PM 7.2 hump pack i think is a 2500mah only had a few charges ...£6.00 posted 4x mini wheels good tread glued £5.00 posted cc01 arms and knuckles with bearings original/used £5.00 posted 2xpacks of 2 wheel adapters brand new £12 posted 1/10 body shell nissan skyline ta04 used but decent £10.00 posted 1/8 truck shell £10.00 posted pair of rc battle machines £20 posted ta04 alu center one way pulley £10 posted light use 1 lipo through it. roller no electrics other then servo Edited by mr nice, Today, 12:54 PM.

The ones with bfgoodrich along side walls

If any one interested, i wasnt sure about what i wanted for them as im shortening my collection so letting them run on ebay http://www.ebay.co.uk/itm/251193732835?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649 http://www.ebay.co.uk/itm/251193738923?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649 http://www.ebay.co.uk/itm/251193744888?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649 http://www.ebay.co.uk/itm/251193750609?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649

Ye good, press back for brake then again for reverse and it works well. Im pleased anyway.

Hi all, i always wondered about gearing and finally i get it! well i think higher pinion-smaller spur=good top end lower pinion-bigger spur=average topend but good pull off. So i put my new brussless5.5t in stock df02 rising storm and it goes well but top end was lacking so with a little research i found that if i lower spur gear to 67T and higher pinion to 22T the top end will show its self--but at cost of pull off which is not a issue as i can set punch mode on esc.But im alittle stuck as for the df02 i cant find a 22T pinion for that model so my long winded question is can i use any 22T pinion to achiieve this. http://www.ebay.co.uk/itm/150905752916?_trksid=p5197.c0.m619 maybe this Thanks for looking.

TBH they are ok 1 of them is in my daughters mini powering mabuachi sh540rs, anther in a stock original Hornet,anther in my tlo1 drifter powerering 19x2 motor and another in a scaler powering a 35t crawler motor and i hav a spare one too and i must say all perform well.So a big thumbs up- just a cheap way to get all non runners---erm runners.

How about this df02 chassis rising storm, got this off ebay last week.It has had a little work done to body posts to fit shell with bigger bumpers to get the sct look, and kept the buggy shell on to keep the dust, bricks and general debris OUT.It has no guts at moment but i should get my 5.5T brushless combo sometime this week (cant wait).Upgraded the rear shocks and springs and silicone grease in the diffs, high torque metal servo. http://s1183.beta.photobucket.com/user/mrnice0121/media/DSC_0102.jpg.html?sort=3&o=0 http://s1183.beta.photobucket.com/user/mrnice0121/media/DSC_0097.jpg.html?sort=3&o=5 http://s1183.beta.photobucket.com/user/mrnice0121/media/DSC_0098.jpg.html?sort=3&o=4 http://s1183.beta.photobucket.com/user/mrnice0121/media/DSC_0101.jpg.html?sort=3&o=1 http://s1183.beta.photobucket.com/user/mrnice0121/media/DSC_0100.jpg.html?sort=3&o=2 http://s1183.beta.photobucket.com/user/mrnice0121/media/DSC_0099.jpg.html?sort=3&o=3

http://www.ebay.co.uk/itm/251182498878?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649

Decided for the misses not to buy this year as i buy all year like some other tc members i buy all year anyway, so just concentrating on getting all unfinished projects done and rtr.

Thanks guys have gone for a 4wd short course truck.

Fancy something fast off road rollers only please and 4wd oh and tamiya .pref-rising storm but let me know.