EGRESSor

ive build a pair of prototypes same car and servo and servo arm one run with my RCP knuckles one run with my new knuckles the steering with the new knuckles will be more better with more servo travel or a longer servo arm looks not so bad or ?

http://www.tamiyaclub.com/trades_model.asp...352&id=2511 will add a like new TQ3 if you want it RTR woud trade for a high lift + 200 or a CR01 + 200 or send me your offer

lower axle gearing i use them more than 2 years in my TXT/Jugg2 based crawlers/rock racers without problems

and a short video the rear diff losts some teeth before the vid , so i cant beat it as hard as usual

some pics

modified TLT axle housings 3.2:1 diff gears straight rear front with these parts AXI 2217 with 4.2:1 planetary 5:1 counter tranny HSR 5995tg servo Mamba 25 4 8cell packs KAN350 and so on the pics

http://www.tamiyaclub.com/trades_model.asp...021&id=2511[]

this one [H]

i use the Tower Pro MG995 without servo saver

it all TIG welded there are some more pics in my showroom and the car in my trading room []

http://tamiyaclub.com/CS/forums/thread/169827.aspx not the cheapest but the best for crawling []

lower link mounts and link made of solid 4 and 5mm stainless steel

some pics 4:1mod Juggernaut2 axles , custom tranny 8:1 internal ratio and it needs lots of work []

yes , i have 10 pairs ready for sale [] send you an email

i have finished some gear sets for TXT and Juggernaut2 axles if you dont like that torque twist [] http://www.photobox.co.uk/album/3252964

let me know if you want one like this http://www.tamiyaclub.com/showroom_model.a...338&id=2511 needs no shocks , has an internal torsion bar , weights about 380g

i hate the painfull cutting with knifes [] brazed 3 blades in U form and brazed them to an 10mm square rod this is welded on old pliers the other side gets a plate as anvil i think i need no longer than 5 minutes for one tire []

http://www.pollin.de/shop/detail.php?pg=OA...k4OTg4&ts=0 they ship worldwide and shipping should be cheaper within EU

http://www.pollin.de/shop/detail.php?pg=OA...k4OTg4&ts=0 [] cheaper

here http://cgi.ebay.com/BRUSHLESS-POWERED-RACE...1QQcmdZViewItem [8D]

click it http://www.tamiyaclub.com/trades_model.asp?cid=30909

here is my old 1/8th brushless buggy [] http://30486.rapidforum.com/topic=101582844284

the making dyno test its 2bb and i used a mod Epic endbell first timing 0* second 10* third 20* and i win more then 15% efficiency compared to the stock MM :mrgreen: with less then 10 minutes of work ;-) stock MM Dyno test

http://www.tamiyaclub.com/trades.asp?id=2511 and a Futaba T3PK and some tires []

i´ve build a steel axle crawler [8D] http://www.tamiyaclub.com/showroom_model.a...=30141&sid=2511 hope the heavy weight axles will reduce the torque twisting if it runs anytime []