EGRESSor
-
Posts
30 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by EGRESSor
-
-
http://www.tamiyaclub.com/trades_model.asp...352&id=2511
will add a like new TQ3 if you want it RTR
woud trade for a high lift + 200
or a CR01 + 200
or send me your offer
-
i use them more than 2 years in my TXT/Jugg2 based crawlers/rock racers without problems
-
and a short video
the rear diff losts some teeth before the vid , so i cant beat it as hard as usual
-
-
modified TLT axle housings
3.2:1 diff gears
straight rear
front with these parts
AXI 2217 with 4.2:1 planetary
5:1 counter tranny
HSR 5995tg servo
Mamba 25
4 8cell packs KAN350
and so on
-
-
Admin please help! I wanna watch that Jugg tuber vid again! []
this one
[H] -
i use the Tower Pro MG995 without servo saver
-
it all TIG welded
there are some more pics in my showroom
and the car in my trading room [
] -
-
lower link mounts and link made of solid 4 and 5mm stainless steel
-
some pics
4:1mod Juggernaut2 axles , custom tranny 8:1 internal ratio
and it needs lots of work [
] -
yes , i have 10 pairs ready for sale [
]send you an email
-
i have finished some gear sets for TXT and Juggernaut2 axles
if you dont like that torque twist [
] -
let me know if you want one like this
http://www.tamiyaclub.com/showroom_model.a...338&id=2511
needs no shocks , has an internal torsion bar , weights about 380g
-
i hate the painfull cutting with knifes [
]brazed 3 blades in U form and brazed them to an 10mm square rod
this is welded on old pliers
the other side gets a plate as anvil
i think i need no longer than 5 minutes for one tire [
] -
http://www.pollin.de/shop/detail.php?pg=OA...k4OTg4&ts=0
they ship worldwide and shipping should be cheaper within EU
-
-
-
-
here is my old 1/8th brushless buggy [
] -
the making
dyno test
its 2bb and i used a mod Epic endbell
first timing 0*
second 10*
third 20*
and i win more then 15% efficiency compared to the stock MM :mrgreen:
with less then 10 minutes of work ;-)
stock MM Dyno test
-
-
i´ve build a steel axle crawler [8D] http://www.tamiyaclub.com/showroom_model.a...=30141&sid=2511
hope the heavy weight axles will reduce the torque twisting
if it runs anytime [
]
]
]
New Ax10 Steering Knuckles
in Monster Trucks, 4x4, Wheelie Rigs and Crawlers
Posted
ive build a pair of prototypes
same car and servo and servo arm
one run with my RCP knuckles
one run with my new knuckles
the steering with the new knuckles will be more better with more servo travel or a longer servo arm
looks not so bad
or ?