-=Jeff=-

changed up the Clod-Hunter. Wide stance and dropped the body down as far as I could.. need to get a new lower Diff bumper/Skid plate

@Badcrumble Thanks, Pink one is my Daughter's, Yellow is my Son's I bought these 8 or 9 years ago. My son is not really into it anymore I don't think, he prefers his drone. The Yellow wheels are from a Blackfoot I believe. 2 of the Chassis are Blackfoot that I converted to 4WD. I still have the front dummy boxes from them if I ever decide to go to 2WD. I wanted to Lock the Diffs in the rear and use them in the snow, but never got around to it. When I was a kid i had a Clodbuster I ended up selling in my 20's (should have kept it) as it was the Original. Anyway, I have recently purchased a p407 and have gotten these out, specifically the Clod-Hunter.. I am going back to the wide stance as narrow stance it not quite what I was after. I will still use the Wild Willy Wheels and lower the body.. I will take picture of the truck when done. I also need to get a set of LEDs for the Headlights of the Clod Body and light those up with the Roll bar.

I have 3 of these.. all are dual motor all have ball bearings through out - One is a stock dual hunter - One has a Proline VW Beetle body with Traxxas XL5 ESC - One is currently a narrow track with Wild Willy Wheels, Traxxas XL5 ESC , shocks from a Traxxas ( I forget the model)and Clodbuster body

So I ended up buying a p407a kit.. I will mod it as I see fit.. how is your Automatic shifting circuit coming along? I want to replace the motor in the kit and might need to do some of the mods you did for the axles to bring them in a bit

I have the same question. I purchased the p407a as I always wanted the Bruiser as a kid but I am not that into RC that I want to spend a huge amount for a truck that will get some use and be modified. I have a Flysky GT3B That I will put the hack firmware on, but would like to find out how to setup the 3rd channel to control the 3 speeds

THIS!!! is impressive.. I really like the automatic you have created.. I almost bought one of these trucks and still might.. I always wanted one as a kid..

I have a hardshell Clod body on my WR-01 chassis. so anything that fits the clod should fit the length of the WR-01.

Hey Twinset.. what wheels and tires are those bigger ones off of?

any suggestions for the LEDs for this set-up? I really like the grille assembly

WOW!!!!! That is just awesome.. where can I get a set. Very impressive work you have done

I have 2 of those 2WD front boxes... My son has a Dual Hunter, my truck is a Blackfoot converted to 4wd, and my daughter has a Blackfoot with a Parma Beetle body tisll in process of going to 4wd. We like using them in the snow and I have found the 4wd helps for this. I need to finish her car up so we can run them all again.. Mine is setup like the Amarok with narrow swing arms and WW2 tires..

Thanks.. I will have to look for it

1) Yes I think they are E-MAxx ( I know they are traxxas) They seem to work well for me 2) I don't recall, when I bought them there were a few variations in them, I need to check.. I did not think the ones I have were timed differently

yes

I have black can motors on mine and a Traxxas xl5 ESC I have to ask what parts tree does the lower front nerf bar come on in your kit? I want that for my truck

yes the arms are the Blackfoot/Dualhunter/Twin Detonator.. Yours are from another WT style kit but shorter.. I have installed the short ones on my Blackfoot kit as I wanted to draw the wheels inward.. I also installed Wild Willys 2 wheels

Well if they are traveling through the Northeast they have about 100 inches of snow or close to it.. that has delayed much of the package delivery

those are like the Exceed kits here in the states.. I have seen a dual motor and a Shaft crawler from exceed..

been wanted to do the same.. build a scale crawler, but i don't wheel the RC I have now too much so it is a tough for me to decide to purchase an SCX-10. I want to use my Clod body on it though..

here are my three.. Well each of my kids have one.. my 4WD Blackfoot My Daughters Blackfoot: converting it to 4wd, just need a new ESC also she has the shorter oil shocks like my son's Dual Hunter below my son's Dualhunter:

Thinking about going back to the wider stance on the truck, I like the narrow look and was trying to get it to look like a scaler, but I think if I went back to the wider look I can drop the body a bit and keep the Wild Willy Tires

I think I found the Tires: http://cenracing.shptron.com/p/ff035-monster-truck-tires referenced in this thread on RCMT http://www.rcmt.net/forums/showthread.php?160391-Bigfoot-Wheelie-King-Update

Yeah, but I don't like the molded blower on the parma lexan body.. I might get a grave digger or something that is old but cool

Yes they do.. I also need to find another body, either a second clod body or a parma body, I like the 53 ford pick up but the wheel base is too short..

The tires/wheels combo are 2 sets of rears from a Wild Willy 2 ( more recent version) That are smaller in diameter than the original Blackfoot wheels but I like them better with the narrow stance as well