Jump to content

The Knight

  • Content Count

  • Joined

  • Last visited

Everything posted by The Knight

  1. Can you open this? https://www.ebay-kleinanzeigen.de/s-anzeige/carbon-chassis-cfk-tamiya-wild-dagger-twin-detonator-wt-01-wr-01/995253805-249-3262 Onlx available in CFK. And wonderful quality!
  2. Maybe the clone.... I don't know. I have ordered ball bearings in 22mm size and that's the easiest way to "fix" the problem.
  3. I have looked into manual and see this: But MY brusier wheel hub looks bit other: The inner circle seems to be smaller than in the manual shown and have no black bearings carrier inside. My wheel hub contents only the bearing. However, I order now 8x22x6 ball bearings. These have the same dimension like the black bearing carriers.
  4. The seller Tamico says: "RC4WD says, the carton content is wright, no extra accessoires" I say: that's world biggest bullsh*t I ever heared. Not possible to mount! Here you can see it:
  5. ...but I havn't this 4 black round ball bearing carriers... sh*t!
  6. I've bought new RC4WD truce scale rims for my Brusier but I can't mounting them. It seems, that some parts missing. I think there is missing 4 ball bearings and/or a filling part between ball bearing and rim. Is this part exclude or what do I need? Shown on this picture, but I havn't got them:
  7. Rangers 2.2 fits to every 2.2'' rims. The midwest wheels have 3 different offset adapters. JC is a wonderful firm. Nice JC-shopping.
  8. JConcepts #332 Silverado Body fits perfect on WR-01. This body have 280mm Wheelbase and same width like Blackfoot 3.
  9. I use two HPI Firebolt 15T Motors and Quicrun WP860 ESC....since years...works awesome.
  10. I hope NOT the alloy gear boxes!! They are terrible rare! The damaged trucks shows the bad quality of rc4wd products. thats typical for it....
  11. No videos... on german page rockcrawler.de I have a gallery with lot of pictures of the truck.
  12. Yes and it drives good. The drive shaft do a good job.
  13. badword! Where you got these ultimate rare alloy gearboxes? They are made by RC4WD?!
  14. Hey guys. After 2 driving sessions I can't believe the improvements! The truck drives so much better than before!. Great. No swing off in curves and on loose ground. So I can say again: I LOVE the WR-01!
  15. Long time I havn't write about new parts. I've changed a lot. Last year a replaced the rims, add a gearbox in front, replaced the brushless kit by two firebolt morots. And lot of little parts. Today, I make it perfect. Last parts I have plugged in. ^^ Started with this New parts are: fast change battery opener + carbon tubes, turnbuckles as steering rods. long screws in gearbox. Some days ago I changed the shocks (to hard) by cheap one. In red and blue. Looks similar to the body. Fits perfect: Final truck: Looks much better, more stability. I love this chassis!! I think about changing HPI tyres into Pro-Line Destroyer 2.2'', but I don't know, if they work better?!
  16. Seems to be longer as a WT-01. Could be 290mm or longer, Maybe 313mm?
  17. OMG! Tamiya is back? *clap* Want to see the first build threads.
  18. The easiest way, is the simplest way. Steel Crawler Drive shaft. Thread closed!
  19. Sry fot late answer.... I am ready with building my chassis and I got a little mistake. The joint shaft in front have a little buckling, so I can't install the steel drive shaft, it wouldn't spin. Is there a solution to fix it? I can't rebuild the front part. Ok, it is not a doomsday,if I wouldn't fix it. I also can drive as 2WD in rear, because this truck isn't a crawler or fast or something, it's more than a showcase model. Edit: mmmmh cut in the middle of the steel drive shaft and connecting the 2 parts with a CC01 joint shaft?
  20. Yes, I also would recommend better rims. Convert to 4WD, much better handling. Take a Quicrun WP860 ESC and 15T HPI Firebolt dual motors. Better shock-system, ball bearings and you'll have enough fun with this "old boy".
  21. have the hard type upgrade. I could use a sold alloy tube and cut of the end. but isn't there an easier option?
  22. I have replaced the chassis by a self made one. The Wheelbase is noch 10-12mm shorter. So the drive shaft is now too long. How can I made an alternative drive shaft?
  23. Pro-Line offers Clod 2.6'' wheels or brawler wheely with +17mm Offset. Have anyone tested these rims on a stock Wild Dagger, Blackfoot 3 or WR01 Chassis? I really want to know if this fits good. (and drive good?)
  • Create New...