LeeMutz
-
Posts
328 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by LeeMutz
-
-
Hi guys. I have a TG10 MK1 1/10 Subaru nitro. Not been used in about four years, started not long back but needs a tune up. Good used condition....
Can you guys give me an indicator of what I should be asking please
Thanks. Lee
-
Had this in a job lot of bits I bought, started auction at 99p, doing well at moment but still not bad value if you're a collector
http://www.ebay.co.uk/itm/351391461911?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
-
-
-
Ah, my bad - slip of the tongue lol thanks
-
first up a genuine Tamiya mini shell, brand new uncut with decals etc.. £25
MGB Roadster Kyosho shell, looks quite old, has decals, accessories etc £30
Located in Gloucestershire, postage should be £5 per item or £7 for both - Thanks for looking
-
Yes its a 10.5T sensored brushless combo... I have a couple of 2s 5200mah which should fit that I use in my Bullet
-
The TA05 was a popular choice amongst the members of the touring car club I used to race with, so I would vote for a tourng setup.
The TA05 is a standard size electric touring chassis, so any of the numerous 190mm race shells would fit.
Thanks a lot
I was thinking touring car set up. Its geared for top end at the moment but comes with various pinions too... Gotta try and find a vauxhall cavalier now (long story)
-
Hi guys, Been away a while so thought I'd get back into RC, just bought a HPI Bullet Flux
And...
Just bought myself a Tamiya TA05.
It has a carbon chassis, and a few alloy upgrades, and an EZrun/Speedpassion 120A ESC with Speedpassion 10.5t sensored motor.
I'm torn between having a touring car and a drift car...
1/ Can anyone with a bit more experience tell me what this set up would suit best?
2/ Also, how do I know what LiPo's to use? I have 2s which I assume would be OK, how do I find out whether it can take 3s?
3/ what size body shell? I want to buy one or two
Here are some photo's of the actual car I've just bought
Any help would be greatly appreciated..
Thanks in advance
Lee
-
Needs tlc but on my ebay, item number 351148358347
-
-
Sorry mate.. Chassis Now sold
Shell available still separately
-
Where are you based. I wanted one for a project but this is probably a bit nice for me. I was hoping only to spend £30 as I'm going to strip it apart. So unless your close or postage is cheap?
I can do the M-03 without the shell for £35 posted? I'm Gloucester so a fair way away
-
Bump, open to offers guys
-
Pictures of the TT01
Also have a LiPo charger, great cond £29 posted
-
Hi all
Selling up my TT01...
It has a brand new Leopard 13T brushless motor and ESC (used once!), brand new Nissan 370z shell unpainted, with decals, accessories and light buckets, alloy prop shaft, alloy steering arms, adjustable upper arms (plastic) for give it negative camber but can be adjusted to normal, drift wheels and tyres and new alloy rear cups
This is a FAST car with lots of grunt!
The brushless set up cost me £50, shell has just cost me £30, adjustable arms were £15, plus other bits and pieces... Coems with Futaba 40 radio gear and a LiPo 2s battery....
Asking £140 shipped which I think is fair... Located in Gloucester
I can get pictures no problem when I get home
Let me know if interested
-
Hi all
Selling this M03... I have just rebuilt it with new ball bearings, new wheels and tyres, spacers inside the shocks to make it sit a little lower and it comes with a Golf shell, which looks to be right WB but needs the body pins modifying/changing to fit... Shell does have a little cut out (looks like an accident with a knife) on the left front arch
Also has adjustable top arms to adjust camber
The only other thing it will need is a couple of the bottom hub screws, I had to steal them for my own Mini lol readily available and you probably have millions, but I didn't, so I stole them
Comes as you see it, no electrics at all, but a GREAT base/starter
Asking £45 plus post, buyer to pay fees
-
Thanks mate, will have a little search around
-
That's a lexan ( polycarbonate ) body Lee . You need to use Tamiya Ps paints , The paint is sprayed on the inside and usually needs backing with either black or white depending on what colour you decide on . Decals are then applied on the outside of the body . Don't forget to leave the window masks in place lol . Sounds obvious but I've seen it done .
Thanks. I want to go for a light/lime green, the paints on ebay dont specify whether they are spray or not?
Can anyone post a link of a light green spray please if not too much trouble? Also, a compatible paint to back it with too (i take it that just means like a protector coat on the green after its dried?) never done this before (as you can see lol).
-
Just bought this for my TT01 drifter I am building...
http://www.ebay.co.uk/itm/251457329034?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
What paint should I use? I want to spray it a nice colour, is it polycarbonate or lexan or soemthing? Thanks, Lee
-
Brushless ESC and motor
now what to put it in -
Sold to Dave
-
How about this and your dagger for my TA04SS MRS? it's boxed has an esc and recently been rebuilt. Fullly ballraced etc. I can get some pictures up in a few days. I can possibly throw a few extras in (radio gear/ motor or similar)
Sorry I would 'just' stretch to the dagger alone, as its had a fortune spent on it, thanks anyway
-
Yeah sorry my fault
Old bits of mine on eBay
in Off-Site sales plugs, tips & gossip - Including eBay, Gumtree etc.
Posted
Hope it's ok to post links to my own stuff.
This is one listing but please look at my other items too
http://www.ebay.co.uk/ulk/itm/351602969317