svenb

Do you need 4? Thought about 49141 or the TB Evo II dampers?

49100 and 53155 cap on a 53280 49099, 53280 and 53280 with 53571 cap You can see the difference in the red/pink of the 49100 compared to the 53155 and the champagne gold and the orange gold in the 53280's. Can confirm that all caps and cylinders are interchangeable. Have you a set of the 49037? Jealous if you have😳 I'm after one set ie a pair.!

But I'll think you'll find the 49100 is more red than pink and the 53280 cylinders are gold, varing from light gold to almost orange depending on which batch and if they've been bleached by UV.

I'll get a photo for you David

Think I had one of those. I give them to my wife who rewards the SEN children in her class for good work, they seem to really like them.

The Jag is a beautiful body, I got mine in 91 or 92 think I paid £130 for it. If I remember right the body didn't have any protective film on and I had to use brush on PC paint. Being a young un I changed some of the number decals to 01! Still have the chassis body and box somewhere.

Looking for a pair of blue dampers for M02 ideally 49037 or another period set in blue. Not the later threaded cylinder type. 🤞🏻

Agreed

Looking forward to the painting. Although I wouldn't be able to do the masking. Good luck sir🫡

Cheers mate

I've used fluorescent orange with success but that was backed with red. I did find the paint consistency is thinner so had a run. Yellow paint is a shocker for covering 🙄 used two cans on a Daytona Thunder but i never backed that with anything other than more yellow. What body are you doing? Or is it a secret 🤫

Photos not in time order. Decided to go blue with the hop ups, almost there with finding them just the dampers to acquire (49037).

Obviously the L version isn't a match for the steering turnbuckle hop up, surprised it didn't state it on the pack!?. Felt rough over the last week or so and have finally finished the chassis. Body next soon as the decals arrive.

Thanks to @ChrisRx718 slightly longer adjusters worked👍🏻

Great build 👍🏻 I may have missed it but is there a unique TA08”R" feature? I've found that the R versions I have have a unique item , can't remember them all but off hand but there's the TA06 R right hand side steering joint ,TB03R steering IFS aluminium bridge and the M08R chassis weight.

It's got his name on it!

Looks sharp😉👍🏻

Courtesy of Mr @ChrisRx718 Thanks Chris😍

Thanks for looking but no afraid not, it's the SCR version of the 1400 I'm after. Or at least the box.

New year bump

Well, I cried for a bit then looked on eBay for a different length turnbuckle, couldn't find a Tamiya one 😞so going to try the longer adjusters(Tamiya) as they are 25mm long . Fingers crossed they work.

Thank you Mr Pants👍🏻 I've hit apon a problem though. The turnbuckle for the steering is to short!! Obviously the hop up doesn't work with the L configuration.

CPR servo fitted

Was only looking at one of these this evening. Will enjoy watching your build🙂

Yes, it's happened to me a few times always by Fedex. Problem starts when they deliver to the wrong address and they have a "signature" to say you signed for it!!