Mark3gti
Members-
Content Count
237 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Everything posted by Mark3gti
-
If anyone is looking, my m07 has just gone up for sale.. ๐ wonโt go Into it, all info on sale post. any questions though, please ask ๐๐
-
Bit of work on my basic ff03 planned to convert to 420 arms and hubs as run a 420x so be nice to share spares ๐ fits perfectly, have to be flipped for ifs so had to drill a hole for the droop screw but all good and easy to do. whilst doing slipped in double cardens. suspension blocks need upgrading as plastic ones arenโt the best but work for now. just had to re-arrange the spacers and achieved the same c hub position. ๐ will test at a track test and tune next week. By then the rears should be done. drove it for the first time Thursday just gone and it was really good in kit form without a shell on, stuck the kit body on, with buckets and all, and handled shocking! hopefully the light weight body I have now will stop this, plus the addition of 417 sway bars which fit almost perfectly, just the rears will need a trim..
-
Iโve been looking for this diff housing but not seen any.. there are some Ali ones on eBay for the ff03 pro which I think is gear diff,, thinking if they are any good, might be modifiable to accept the ta06 diff as I have them for my m07 ๐ค
-
M07 funโฆ started as a concept and escalated from there,, quite a lot of time and effort gone it to this.. ๐๐ modded to take ssbb dampers so I can utilise trf springs I have,, 3d printed towers, tried many setups but finally got there,,, we are a bit more generous on the rules and are running 17.5 blinky,, no top end motors,, we running speed passions or just stocks to keep it competitive.. As long as you glue the front sidewalls you can setup almost how ever you like! ๐
-
Digging up this threadโฆ anyone got a ff03 or 4 evo or other variation potentially for sale? Looking for a cheap/ish roller to have a race with,, need to show some schumacher fronties how itโs done ๐ค๐๐
-
Interesting.. a bit new but sending on price,, be a bonus.. Iโll pm you..
-
Morning all,, on the look out for a ff03 evo ideally,, but would consider a 4 or even a non evo possibly.. this would be to use so used preferred but interested in new too.. anyone got a little old ff03 lying in a box unused they donโt want? ๐ have a good day all..
-
Bump how much?
-
Bump for m08 options also ๐
-
Looking for a m07 for a friend, nothing too wild, we might be running a stock mini class at our club.. anyone got anything around used and not required any longer? Ideally a roller or slider, shell not important but open to it and can pass details on.. Also considering m08 now.. ta in advance
-
Have you pics of the 42354s? thanks
-
The Next Project TB02 - Slow Build - Finished June 2023
Mark3gti replied to TwistedxSlayer's topic in The Builds
How did I miss this.. ๐ be watching ๐ -
BNIP Tamiya 53326 TA03 Aluminum Racing Steering Set
Mark3gti replied to Mark3gti's topic in Sales, trades & wanted
Bump. Still available.. ๐ may trade for ta02 / trf / f103 hopups.. -
Up for sale is 1 x trf417v5 / 417x Had this for a little while as planned to collect one of each. But plans change and now Iโve decided to concentrate on my two main race cars. So this is now available. I originally bought it as a 417x semi rebuilt, and since finishing the rebuild off Iโve come to realize itโs most likely a 417v5 but been built up on a 417x chassis plate. Most likely the v5 plate was scratched up and got removed and used a 417x as the v5 plate is very hard to source. Upon inspection I found It has the thicker damper towers and the split motor mount bulkheads and of course the v5 aeration dampers all indicating v5 status. Itโs had new a new front belt along with other parts along the way as required and I was told originally by the previous owner most bearings were replaced as he started to rebuild. It is in great condition and deserves to be used. Hardly any marks on it, There are a few bits where the blue has worn off the alloy pieces through use, but the chassis plate is basically brand new. There is a blue 3x8 Ali screw missing but Iโll put a replacement in from my other car so it is correct, just forgot to do it before pictures.. same also the rod stopper which is missing off the rear arb I have but not fitted yet, but included.. As with all second hand cars, itโs always best to do a thorough inspection your self to ensure everything is ok and up to your standard. International post available, please contact me for exact prices as Iโll have to add it on to the price. For more pictures, please contact me, and we can sort out WhatsApp or picture messages etc. ยฃ250 including fees and uk postage
-
Bump, lots still available..
-
Bump for price correction..
-
Any interest at all? ๐ช
-
Still here
-
Iโll try not too! ๐คทโโ๏ธ๐ญ๐ญ
-
Thatโs a neat idea! I like it! Iโm gonna be in blinky, I wonโt know if I need to get fans on till I race it. Iโm hoping not. Itโs only a small track. ๐ but I like the fan mounted at the rear! ๐๐๐ I tried to test it outdoors the other day but handnt glued the tyres, got 10mph and the tyres rolled away! ๐๐ gonna glue and try again. ๐
-
Hi there, sorry for the delay! ๐ im running a trackstar 80amp Had to take the fan off but reckon itโll be ok. the motor is a old trackstar 17.5t Think it was a 94t 0.4 spur 35t pinion, FD 2.68.. i was advised 2.6-2.8 on a 17.5t not sure if it will be on pace with the other gt10 in the class Iโll run in but maybe one day Iโll see! ๐ค
-
Tamiya TRF415 Spares All are 415 spec but compatible with some others in the range.. if unsure let me know and Iโll check the manual. Trf 415 Shock tower front ยฃ7.50 (new out of pack) - 51050 Shock tower rear ยฃ10 (new out of pack) - 51051 Top deck plate front ยฃ15 (new out of pack) - 4305540 Top deck plate rear ยฃ15 (new out of pack) - 4305539 Motor rear bulkhead long ยฃ10 (new out of pack) - 3455726 Rear bulkhead short ยฃ40 (new out of pack) - 3455725 Front bulkheads ยฃ30 (new out of pack) - 3455724 Rear plastic diff halves ยฃ10 (new in kit pack) - 51058 TRF 415 / TB EVO 4 IV Steering arms ยฃ20 (fitted but not run) - 9805938 Steering bridge ยฃ15 (fitted but not run) - 9400097 More to follow, once sorted out.. prices are plus postage.. usually 1st or 2nd class recorded so 4-5 total.
-
Tamiya 54162 carbon rear shaft. brand new in pack. ยฃ20 posted in Uk and fees included