-
Content Count
366 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Everything posted by Macinnis
-
Where are you located Wade? I have a spare rear end for the big bear. Iโm in Missouri USA.
-
I found the .06 mod pinion worked perfect. The 48dp worked but as I said it squealed. Once I found and put in a steel spur gear, it chewed up the 48dp pinion on the first run. The .06 is going strong. The kc lights are cheap on shapeways. I donโt remember the price but it was much cheaper than auction. Half the price or better. You sign up for shapeways, send them the files you want printed and what material you want used. Tough and flexible I think is the name of the basic material and it works fine. They will send you a quote to have them printed. Add them to cart and it takes about a week. MCI racing from Canada has excellent quality decal reproductions.
-
https://www.amainhobbies.com/robinson-racing-mod-0.6-metric-pinion-gear-16t-rrp1116/p454462?v=77976 That pinion will fit perfect. Shapeways will make the bumper and sand it for much cheaper. You just download the file and send it to them. They will quote it and send you an invoice if you want to order. Once I received mine, I did have to sand the pegs a bit to get them to fit into the springs. I made it worth the shipping and had them print the KC Lights and body mount as well.
-
Check out thingverse for the file to 3D print a bumper. If you do not have access to a 3D printer, shapeways does a good job for reasonable price. Cheaper than auction sites anyway.
-
A 48dp pinion will work but it squeals. Get a 16 tooth .06 mod for best fit.
-
Raked leaves and decided to make a tree trunk micro crawler course. 1/18 RC4WD Gelande
-
Tamiya Club Official Top 10 Fastest RC'ers List
Macinnis replied to Jason1145's topic in General discussions
Aside from being crazy busy at work, the city decided to take a 10 chunk of asphalt out of my speed run street and put in gravel. Just checking in to see if I am even still on the board -
Venom makes lipo batteries with universal plugs. I have had good success with them.
-
I wanted a crawler bad but wasn't sure I wanted a full 1/10 scale. More something to couch crawl with. Ended up getting this little guy and so far it's a lot of fun.
-
Tamiya Club Official Top 10 Fastest RC'ers List
Macinnis replied to Jason1145's topic in General discussions
I broke down and ordered another GPS. The TT02B clocked 98 KPH on a test run at lunch today. Once I get 100 KPH on video I'll be posting! I don't know how much more I can squeeze out of the buggy version. Its on the brink of out of control at this speed even with quite a bit of weight on the front. -
It was slow and popped instant wheelies.
-
Tamiya Club Official Top 10 Fastest RC'ers List
Macinnis replied to Jason1145's topic in General discussions
Good luck then! That thing should FLY -
Tamiya Club Official Top 10 Fastest RC'ers List
Macinnis replied to Jason1145's topic in General discussions
does the cover fit? -
Tamiya Club Official Top 10 Fastest RC'ers List
Macinnis replied to Jason1145's topic in General discussions
You are going to have to show a pic of a 37t pinion fitting in a stock tt02 lower deck -
Mud Blaster 2 - WT01 Chassis Build/Upgrades/Pics
Macinnis replied to Jason1145's topic in The Builds
I bought a new shell for my WT -
That diamond ring shot it awesome
-
A friend in Kansas City which was direct in line for totality got this pic.
-
Taken at 12:15 CST In Missouri
-
Tamiya Club Official Top 10 Fastest RC'ers List
Macinnis replied to Jason1145's topic in General discussions
Don't forget "Down hill with a tail wind" -
The Tt02b is a base model. However, it's relatively cheap and upgrades are endless. I had a blast building my neo scorcher. Seeing what worked and what didn't. I probably could have bought a better model for what I have in this one but I learned a lot and will upgrade in the future with what I learned. As I stated in another post, for $20 upgrade (29t pinion, 64t high speed gear set) from the base model you can hit 50-60 mph but that doesn't guarantee the rest of the car will hold together until you upgrade more. I have sent mine end over end down the street at 50+ mph with nothing broken.
-
Tamiya Club Official Top 10 Fastest RC'ers List
Macinnis replied to Jason1145's topic in General discussions
So I got the 3s JST extension cable in the mail. I cut the lead off my battery for the GPS and soldered it to the red and first black connection. Hooked it up to the gps and it worked!!! Great idea. Run the gps off the lipo! -
Tamiya Club Official Top 10 Fastest RC'ers List
Macinnis replied to Jason1145's topic in General discussions
I bought a 3s JST Male/Female extension and will be hacking it up to create a power supply for my GPS since thats the battery I will be using for speed runs. However, the JST extension has red/black/black/black. I assume I use the black on the end and the red on the other end? -
Tamiya Club Official Top 10 Fastest RC'ers List
Macinnis replied to Jason1145's topic in General discussions
I think a brushed category would lead to "who can make the biggest ESC fireball" -
I thought this forum had a bad word filter. ๐๐๐