Jump to content

Grotty Otty

Members
  • Content Count

    333
  • Joined

  • Last visited

Everything posted by Grotty Otty

  1. Just seen this, awesome job. Actually looks cooler than the original 😎
  2. We can do an Avante... 😉
  3. I have a Dancing Rider, it's great fun. Surprisingly stable and can be drifted on a slippery (dusty) surface. Not especially quick, I'm using a Tble-02 and the ridiculously expensive Tamiya Life battery but it runs forever and is safer than a Lipo. Having said that I'd go in with a Hobbywing 1060 and the small Carson Lipo which fits just to see how quick it'd go...
  4. Drive shafts definitely as the plastic out drives rub on the wishbone on full compression which is magnified by the soft rear springs inability to hold the back end of the car up. You can't really pop in to lighter oil as all that does is allow the rear to slap the deck repeatable. @ThunderDragonCy is right about the DF-03 spring set there bang on for the DT-03, I use those with 60w oil. I've got turnbuckles on mine front and rear and ended up very near the angles if I'd just left the plastic upper arms on so not sure I'd bother with those. The sway bars are so loose in their mounts that any effect they have is pretty minimal so I've left mine in as it's bit of a job to remove them.
  5. Switched the Cat K2 to a new Spektrum 2 Channel receiver so that it is now steer wheel like the Couger and CR-01, think I may prefer it now to sticks... Ran the Couger and DT-03 to compare its rear mounted motor against the mid mounted one of the KC. The Couger is like a lazer, it tracks wherever you point it... The DT-03 is more of a shotgun point it and it'll go somewhere in that general direction, it is way more fun however just because it's imprecise. I know you can't really compare these as it's apples and oranges but it was fun none the less 😁
  6. @87lc2 great colour scheme.. Is it based on the "The Fall Guy" truck? Colt Seavers would look right at home in that 😁
  7. Bought mine when it was on offer at Tamico a while back for around £200. It's fun in a slow kind of way, plus unlocking the diffs means you can run it much like a normal buggy as well. I've set mine up with a Spektrum Dx5c with switchable 4ws - front, front & rear, crab and rear only - which keeps it interesting to run. Only upgraded the drive shafts to Steel JunFac ones and added the extra clearance lower links. I'm not sure either was necessary however. They're a great quality build and definitely worth a serious look.
  8. Nope. Inspired. Looks great in those colours 😎👍
  9. 3450kv Etronix brushless set up on a 19t pinion and 2s lipo on grass and dirt. Plenty quick enough for me.
  10. Interested in this also, especially the optimum set up for a slipper. I understand that for jumping they are desirable to take up any access sudden motion through the drivetrain upon landing and for surfaces where there is too much grip. I assume if they 're not required then an eliminater might be lighter? Less weight for a pinion to spin up?
  11. I don't know that radio I'm afraid but Absima have a good reputation. I originally had a Core Code stick Radio which had a multiple model ability but these got discontinued sadly. I now use a Spektrum Dx5c which is steerwheel and hugely programmable but the recievers aren't the cheapest, but I still think its excellent value for money. There's a few on here that use flysky (which are even cheaper) to good effect who may be able to chip in. Re read you post and now understand you already have the Hornet! If you've friends or kids etc it'd be good to keep the Hornet with the basic Absima (Hornet isn't particularly complicated after all) and then the following bunch with whatever you choose next. Two people can then run the cars at once...
  12. Welcome to the slippery slope of n+1 where n is the current number of models you have and the +1 the ones you need or want! I started exactly the same way, had a Hornet then an Optima Mid in my early teens then returned to this after many years with a DT-03 to see how much its changed... I have a fair few now including a re release Hornet which I'll never get rid of.. My suggestion is to scratch the Manta Ray itch as it'll be far more capable and a build you'd not have done. Then get a Hornet later as you'll be hooked! Be sure as to get a radio set that'll bind to multiple models as buying just a reciever will work out way cheaper. There's an amazing wealth of knowledge on here so ask away!
  13. What @ThunderDragonCy said 😁
  14. The length can be shortened using the little plastic spacers internally on the shock shaft (normally on the v parts tree) before you pop it through the shock body. Failing that a couple of o rings will work as well.
  15. A new Shorty lipo to replace the scarily bulged one that is now residing in the BBQ with the lid down! I'll get it in a Lipo sack and get to a recycling centre this week...
  16. Do it, its a great build, there's multiple motor positions in the box, needs no upgrades and is the usual Schumacher quality. I'm looking forward to comparing it to my rear motored DT-03 to see how the mid motor handles.
  17. Finished the Couger KC. Usual brilliant Schumacher quality, shame I can't say the same for my paint handy work! A few bleeds, but it'll make no difference once it's covered in mud and debris, oh well. Had to order a new Shorty as mine is currently sat in the BBQ with the lid down after I noticed it was swollen and bulging when I took it out of its lipo bag!
  18. All stock with a basic Radient Reaktor brushless set up. After much deliberation on whether to get a Top Cat (or an Astute or XV-01) I was intrigued by the multiple motor positions and their effect on handling. Should be somewhat different to my DT-03! The Modelsport.co.uk sale price was to good to miss plus you're right we you say they go together beautifully, except the Cat XLS... That's a whole different rewarding challenge!
  19. My Re re Hornet. Its what got me into this hobby all those years ago and I wish I'd never got rid of my original. Compared to all my other buggies it's utterly hilarious at just how bad it handles, bounces, skips, turns, rolls and stops. Its brilliant and definitely the most fun one to run. I'll never get rid of it.
  20. Cougar arrived in under 24 hours from Modelsport.co.uk. Had been weighing up a Top Cat just for the inboard shocks but these are now only £20 more expensive.. Interested to see how the motor positions effect the handling plus being the genius I am I'll be using it on grass and dirt and not what it was designed for. 😏
  21. Think this is a really interesting concept but it's definitely going to be the stopping that's going to be the hard part. My M-06 just wants to swap ends if not set up just so on the brakes. I'm sure someone here had a 4wd chassis with a one way bearing flipped in the front so that it was rwd when running forward but as soon as the brakes were applied the car became 4wd. I may be completely wrong of course! Not sure how that would translate into a rwd chassis though.
  22. After many months of much deliberation of trying to decide between an Super Astute, Top Cat or Lancia XV-01 I ordered the Couger KC that's now on sale.... Obviously..
×
×
  • Create New...