Only4Fun

@jg009 Hi. That's the motor I have been looking at. It's about the same price over here, and not chopping the chassis is definitely a bonus

Kelly says "Hi Jack. Lovin' the new wheels Bro' x"

@OldSchoolRC1 Thanks for your reply. I hadn't heard of the Xtraspeed before. I am now probably going to try an 80t motor to start with and see how I get on, as it is the cheaper and simplest option. I will look into the Xtraspeed for future projects though. Thanks again

Great idea. I also watch YouTube more than TV. Here's my channel https://www.youtube.com/channel/UCAFR4BiEMb2OMAQtNJon2Yw

Hi Steve. It's for my Pajero. I have a 55t Axial motor in it at the moment. Would a 80t be much different from that. Thanks mate. (Derek aka Holly Hill RC )

I love Ford GT's and this is Beautiful

I also have a Core-RC UAC-50 which I charge my Nimh batteries with. It is easy to learn how to use and works very well. It does cost a bit new but if you don't mind using Ebay you will probably find a cheap used one (or similar) there. Mine was used and it cost £20 inc post and it was in mint condition.

Hi, does anyone know of an alternative to an hpi reduction gearbox set for the CC-01. I can't find a hpi one. Many Thanks

That's great. After I read your post I found the housings, along with pre-wired terminals at RS Components, and there is a branch near me. I would have to buy 10 of each item for a total of £5, but that is cheaper than a new harness plus p & p, from Modelsport, who don't have any in stock for a few weeks (estimate). I already have the Tamiya connectors, terminals and wire so, I can solder it all together. Many thanks for your help. I really appreciate it

Hi Tamiyabigstuff , sorry for the late reply. Thanks for answering. Please excuse my ignorance, but are you saying your phone battery connector will fit in the socket ? I would never have thought to have looked at anything like that

Hi. I have got a TT-01E Subaru Impreza WRC 2008 and I need screws for the led fixings for light buckets. Could anyone tell me what size they are please. Many Thanks

Hi, I have just bought a used TT-01E Subaru Impreza WRC 2008 with a TLU-01 Light unit that is missing the harness lead that plugs into the "BATT" socket and connects to the battery. I thought that I could make up my own lead. I have wire and Tamiya plugs, and I thought I could use the jst plug from one of the spare led's I have, but it won't fit in the socket. I am struggling to find the correct plug. If anyone can advise me how to solve this problem I would be really grateful. Many Thanks Derek

Hello, I haven't got a physical manual, but this may help https://www.tamiyausa.com/pdf/manuals/58397ml.pdf

Pajero Metal Top Wide #49490 2008

@steponit! You're welcome

Hi, @steponit! I have been using the FlySky FS-GT3C for about a year and it's been great. Receivers can cost as little as £6, and I regularly run 8 of my RC's with mine.

@Saito2 I don't know about the Futaba, but I have the Tactic TX300 which I use with my SCX10 and have had no problems at all with it. I have had it about a year and use it 3 or 4 times a month, for a couple of hours, and haven't had to change the batteries yet, which are only cheap Ikea AA's. It also only uses 4 of these too, unlike most older transmitters which take 8. I echo what Prescient said that they are really easy to use

From my YouTube Channel

Good videos. I really like the Ford body on this chassis. I was going to get this chassis for my CC-01 Pajero, but I think I will get a Blackfoot body instead.

Only just seen this post. Thanks for the channel shout out @JennyMo. Kelly has settled in nicely and has made a bunch of new friends : ))

Thanks, I will look out for that and your blog update.

I've got those tyres on my WR-01 wheels. They are HUGE !

Hi @wilsonian Thanks for the advice on the quick release. I was reading through your Wild Dagger thread and think this is the sensible way to go. I recently bought a WT-01 rolling chassis which I was intending to use for spares for my WR-01 Double blaze, but because it came with Ball bearings, Alloy shock towers, Alloy front and rear hubs, Alloy c hubs, Alloy shocks, heavy duty servo and a Painted Double blaze body. After a quick clean, and seeing how good a condition it was in, it seemed a shame to tear it down. So I've decided to restore it back to a runner. I've never had a 2wd monster truck. In fact the only 2wd's I own are a Brat and a Taiyo Edge Freestyle BMX RC ! So it will be quite fun and interesting to have a 2wd and a 4wd Blaze. Thanks once again and I appreciate your offer of the spare.

@Prescient Thanks for replying but I have decided to follow wilsonians advice and go for a quick release

Hi, I am looking for a WT-01 or WR-01 Battery Retaining Clip. If there is anyone who has one spare to sell, to save me buying the complete E Tree, I would be grateful. I am in Hampshire in the UK. Many Thanks Derek : )