thesnake505

hi mate i have a tt-01 and am using a Mtroniks sonic 4 RV11 ESC can be found on ebay here! its water proof as well so it can be used in wet conditions which is why i got mine :-) http://cgi.ebay.co.uk/Mtroniks-sonic-4-RV1...1QQcmdZViewItem

hi mate do u still have to tb01 email me on jug505@hotmail.com thanx snake

hi, i have fitted the ball race set, and alluminium prob, 15x2 turn motor, oil filled shocks, and a carbon fibre upper deck (cam in post this morning) and am wondering weather i should fit the speed tuned gears or not also what does the one way front diff do? also i have baught on of these and cant work out were to wire it! i have put it in the reciver but it dont work the fan lol! so whats the best thing to do thanks, your local friendly snake

would just like to say thanx to all the people who adviced on my servo eating tt-01 the servo saver seams to have done the trick, a run lasting two battery (3000mah each) and its still turning as its should! so thanx all your friendly local snake

my car was an expert built car and it didnt come with anyting to fit the as16 servo! have baught a servo saver from mk moddels ebay store! thanx for all ur help! your friendly local snake!

sorry about **** picturs but taken off cam fone! this is how i have had thr car set up! the original tt-01 server srm would not fit the as-16! thanx

will this be any good then? http://cgi.ebay.co.uk/TB3004-TRICK-BITS-LA...1QQcmdZViewItem my car is a tt-01! how does this work??

im after some good steering servos, as i have had two acoms as-16 stop working on me in three runs! one lasted about 1 min and the other about 15! the gears inside bother have no teeth left! so any advice on a new one?

no the tt01 one is like a cage that sits around the steering servo! ill try some tape and search for something better

i baught a 40mhz radio gear set from ebay nib for my tt-01, came with contoler, 2xservos and reciever, fittted and all working good, apart from the steering servo is not held vey tight, it can move from side to side, i have no other way of holding the servo! and am tinking im gona have to change the bracket (just as iv got all the wire neat and every thing lol) so is there any thing i can do or just buy a set of these? http://cgi.ebay.co.uk/GPM-Alloy-Servo-Moun...1QQcmdZViewItem also is there any uk supplier of these? thanx for any advice, your local friendly snake

im new to this world and wondering if there are any meetings/events happening around the telford area? thanx thesnake505

im a runner, im new to all this, but im a speed freak and its all about the speed for me! seeing how fast it will go with each mod etc, also side ways action is alway fun, i admire you boys that build with such detail but its not for me!

hehe esscort would be nice but, i have found a guy who is making 1/10 capri shells! gona give me a msg when he has a few done :-)

ok, in the post today i have had a set of ball race bearings, a metal motor mount, a ally prop, and a set of adjusable rear arms and my new esc, im waiting a 21 turn motor i have orderd, i will try this and order a 15 double turn motor, but i dont want out to daft while im learning! i have been looking at tyre/wheel sets as the ones i have are just slicks!! the new esc does not have an on and off switch is this normal???? can it cause a problem?

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...N%3AIT&rd=1 thats the esc i have baught, shame bout shells u be able to post pics of the zakspeed ones???

lol he got that from my dad! after i turned it down :-p im thinking glyn, got the car sorted, borrowd miss's hair dryer and hit the esc and recever with it! and then orderd a water proof esc for good look! any 1/10capri shells avalible for a tt-01??

Brooklands 280 as in capri, go on how u know me name? i take it i kow u lol

ok so car has dried out, turned on and beeping from the esc, so i tried to reset and i keep getting a constent flash! in the manual this says there is no contoller signal, but the controller is on! so were should i look fot the problem? reciver, controller or esc??? the car is a factory built tamiya, so came ready to go new in box! and cant work out why after five mins it would play up! also could a faulty ??battey be to blame!

so my new tt01 mercedes-benz c-class dtm 2004, so took it out for a play with a7.2 3000 mah batterty in it, and new batterys in the supplied trigger/wheel controler, and the reverse is a bit **** u push reverse and it dont allways work, and then after about 5 mins of playing the car started cutting out, it would just stop, then quick on and off and it world work fine! it is damp out side and im thinking this could be a factor! as i was running with out the shell! thanx for any advice

thanx for reply, i have been looking at the bearing hop ups, how much should i expect to pay? http://cgi.ebay.co.uk/Tamiya-R-C-RC-Part-T...1QQcmdZViewItem i found these on ebay are the worth that? also, whats the best motor to use, i read some were that the esc can only take so much the car i baught has a TEU101BK fitted so whats the best motor to run with that the idea is to just thrash it about for a bit untill im good enough to attend a (begginer) race, if at all possible

im sorta new to all this, had a car a while ago but was nicked out me shed few weeks after i got it, so never really got started, but decided to have a nuva go, so baught a TT01 from ebay, and was wondering what this is like as a begginer car, plus also what hop ups are worth having? looking on ebay at the things like the alloy blue drive shaft and stuff but dont really know whats worth spending money on and whats not, also what every thing does lol! cheers for any advice, your friendly local snake