23psi4age

Update: I completed the Silvia S15 51478 210mm WB and it came out great! Did not install the included rear wing or side mirrors. Installed HPI Cup Racer fender mirror and Yokomo standard 1/10 wheels Work T6R.

Hey folks I finished up another body for my TA05 M-Four and tried out a local indoor drift track in Miami for the first time. It is a really nice place with cool people called Drift Lab Circuit. The S15 is the 51478 Body and I painted it Tamiya PS-47 with silver backing paint. Also did not install the included rear wing or mirrors. Did install HPI front fender mirrors and Yokomo standard size 1/10 wheels. Had a great time, I only got pictures of my son driving my car so no nice sideways shots lol. Check out the some cool pics of the local pros I took also.

Ahhh I understand, since they are actually smaller cars they are 1/10th but more like 1/12th comparatively.

Good eye my friend, yes i was lucky enough to get it signed and to meet both Porsche gurus while I worked at Parkhaus1 in Miami!

Thanks! Yup I had an AE86 with 4age hks 1.7 with t3/t4 turbo at 23psi on pump gas electromotive ecu and nitrous like 15 years ago! It was the best, death grip fast.

Hey folks, this is my first post to TamiyaClub and I wanted to share my cars. I have used this forum to figure what I wanted to build and to find out options for bodies etc over the last year or so and its really a great forum and resource. I wish that I was better at taking pictures while I build the bodies and the chassis but I end up being to focused and I forget to take pictures. I would have put this in the build section but its pretty much the finished cars. So being a big Porsche fan I wanted to get an RC car and at the same time Tamiya Released the 1/10th 40th Anniversary 934 Jagermiester. A great car and kit, I enjoyed the build but realized it was a dated layout and tech, and also really big. So after researching about Tamiya I found that there first cars were mostly Porsches and actually more like 1/12 scale and that the most recent similar and cost effective offering was the TamTech GT-01 Chassis. A nice RWD setup i picked up a few TamTech 935 RTR kits one to drive and crash with my son and a couple to keep / sell. The RWD proved to be fun with high grip but out of control on slick surfaces. So not wanting to spend more money to get older rare vintage and older tech, I started looking at M-Chassis to quickly learn they are all FWD or RWD and pretty entry level, except for 1 special limited edition version! So as quirky as it is, the TA05 M-Four was just what I wanted 4WD M Chassis that was a little "high end". The main downside is the tall height of the front shock towers as many 1/12th scale bodies are of cars with low lying hoods. (So all of my bodies sit as low as they can on the shock towers but oddly enough, works out being just the right height so far) Being Retail $600 was not what I wanted, but tamiyausa has it for $249 nowadays. I want to buy one more to keep since it is in fact limited edition! Tamiya 84255 TA05 M-Four Dynamite Basic Fwd Rev ESC Futaba Standard ball bearing servo Tamiya SPT Motor 380 Tactic Basic Receiver / Controller So after figuring the chassis out I was about to pull the trigger on 934 and 935 TamTech Bodies and original 934 and 935 plastic bodies I found available, but then learned that the 934 and 935 where on an even smaller wheel base than 210mm....So I re-started my search for bodies to find HPI Cup Racer 1/12th scale had 2 - 210mm wheel base bodies : Lancia Stratos and luckily '73 Carrera RSR! BAM!! Back on track to accomplish my mission of 1/12th scale Tamiya 4WD M Chassis Porsche! So I ordered the discontinued HPI Porsche body from Japan. It is very accurate with nice trims and accessories, but thinner flimsyier than Tamiya bodies, but thats ok, its still awesome! I also started looking again at Tamiya bodies as they are always super detailed and very sturdy. So I have a list now and I have accomplished 3 bodies with about another 5 left to obtain and paint: HPI Cup Racer Porsche Carrera RSR - Done Tamiya 1/12 Renault Alpine A110 - Done Tamiya 1/12 Honda S800 - Done Tamiya 1/12 Nissan Silvia S15 - Done Tamiya 1/12 Renault R5 Turbo - Next in line to complete and to make a scale replica of my own actual 1984 R5 Turbo Red - Need to Find! Tamiya 1/12 Fiat Abarth 1000 TCR - Next in line to complete and currently available for little more than i want to spend around $200-$300 for body. But super awesome with engine hanging out of the back!! Tamiya 1/12 Porsche 959 - Hard to find and very pricey - awesome none the less and required for my Porsche collection!!! I will do this one after I do a Renault R5 Turbo Tamiya 1/12 Toyota Celica Group B - Even harder to find than the 959 and I love Toyota so I hope to find this one at a reasonable price and build also. And on to the rest of the pics! 1973 Porsche 911 Carrera RSR - Burnt Orange - 3mm Front Wheels - 6mm Rear Wheels : HPI Cup Racer 8 Spoke MX60 1971 Renault Alpine A110 - Corsa Grey - 0mm Front Wheels - 3mm Rear Wheels : HPI Cup Racer 8 Spoke MX60 1965 Honda S800 - Metallic Black - 3mm Front Wheels - 3mm Rear Wheels : HPI Cup Racer 8 Spoke MX60 Nissan Silvia S15 - Pink Gold Irridescent PS47 - 6mm Yokomo T6R Wheels Thanks for looking and any comments are appreciated.