holyhope

Ok! I will buy it as soon as possible!!! thanks Massimiliano

Hi! Maybe it work in photo you can see the rear diff excursion. and you can see the adding of shims for keep diff in right position. NOW SEEMS WORK!!! another problem is that my rear diff sometime open itself... maybe with this shims will not open anymore but I do not know... i see in the video it is used a glue on the screw... some one have try this operation? thanks massimiliano

Hi! Really many thanks, I will update my cc01 today! I will give you info in next day! I will implement this solution! Thabks Massimiliano

Hi to all I have a problem with my read tamiya differential!!! I try to block it with its right blocking plastic accessories. The first time the screw unscrewed and diff open (I mean the housing of the diff so the wheel spin free). I reclose and now I have a more big problem... the central gear do not engage the differential... The differentialis free to move left and right... when it is all to left (correct position.... I wan say "right" position but it will be missunderstand eheh) the central gear (central gear I mean the gear where the transmission shaft is connected) correctly can transmit torque to the diff. But after some second (or minute) of RC usage the two half axle of the rear axle (the two half axle where in the center are conneted togeder with the differential) slip a bit outside and, internal to the axle, the differential slip a bit to right and in this position the central gear spin free without engaging the differential (in true engage a bit a it is possible to ear a very bad bad bad noise!) so without transmitting torque to the differential (anche so no to the wheel). What I can do to fix my axle?

Hi to all! I repair it buying a new "manta kit" diff... The gear inside the differential was damaged so I substituted it! I want a better kit but I will spent 50euro minimum so i preferred buy a stock kit and keep money for a new RC! An info... Someone have never tried the LiFe 9.9v battery instead LiPo 7.4? I use it for some time and maybe it is that encrease of power that damage my diff gear Thanks Massi

Hi to all! How are you? I have a new problem..... ****! Maybe is better if I open a new post? So now I have the rear diff that not work! I use config with rear diff open (and grass hard) and wheel are not traction..... Axle it is ok but wheel are spin neutral without power.... If I disconnect axle and I turn with hand the diff the wheel still not move.. I try to open and close the diff without success..... The problem is when one wheel go to extern a bit and in this case there is no power... If I push wheel it works! I try with some thing to pull the block internal but no success.. Any idea? I must buy a new complete rear diff? Thanks Massimiliano

Some one have never try this? I buy two kit but both NOT working because there is too dead zone for steering and after 5/10 minutes the screw will decrease strength and release a bit so increase more the dead band and car not steer anymore!!!! Some one can tell me something about this problem?! thanks Massimiliano

OK! Thanks Michael! So I wait "better time for buy" eheh I have no hurry! eheh Many thanks

Hi Michael Thanks for your advice! Yes buy used maybe is a bad thing... Maybe I buy something damged.... I think on it! 670€ it is very too mutch for this RC... I think on it! edit: in 3 or 4 month if I want to buy a NEW (not used) price will be more or less? so I mean, the pre order is the best price and in future the price of new can only be more then now or normally pre order is the higher price and in the future normaly decrease? Many thanks for your answer! Massimiliano

Hi Shenlonco thanks for your info. You are right and cost not very mutch more.... Now I want to wait 1 or 2 month because I see that it will be putted on sell the new e-revo 2018 and new X-maxx 2018 and maybe someone will sell your old RC and price maybe can decrease! Maybe! For the "new" purpose the cheaper shop is RCMART do you conferm? i not find any other shop more cheaper than it. the only problem is shipping cost... edit: an info: it is more chepaer pre order now the new traxxas e-revo 2018 or maybe wait 3 or 4 month and then buy?" thanks Massimiliano

Hi! Thanks for tour info! So if there is no two speed and no locking diff... It is more cheap to buy MST CFX chassis eheh! there is no other reason to buy TRX-4! I'm NOT expert of crawler (or RC world) but IMHO it is a good thing the diff locking! thanks Massimiliano

Please correct me if I am wrong, if TRX-4 new version still has locking diff... But... Other than traxxas TRX-4 there is any other RC that have diff locking via remote? Thanks Massimiliano

Hi Yes I see it but have not diff locking via remote.. That is the only reson that TRX-4 is better, for me, then the MST CXF... Thanks Massimiliano

Hu Michael thanks for your answer! Yes you are right... maybe in a futre I will be buy a buggy! For now It is better to fix my pajero. Yes I still can buy another chassis that is is for abour 25€ shipped that it isn't very expensive! I think on it! Many thanks! Massimiliano

Hi! thanks all for answer! in italy custom are high severity for big packet! From RC Mart I see very interesting price! The fantastic TRX-4 Defender: http://www.rcmart.com/traxxas-820564-trx4-scale-trail-crawler-with-land-rover®-defender®-body-p-73184.html?cPath=420_1187 that is 380€ + 70€ ship (economic) that are total of 450€!!! **** SHIP COST! The very very very good e-revo dual motor (not know how must work but it is simply faster ahaha): http://www.rcmart.com/traxxas-560364-erevo-scale-electric-racing-monster-truck-ready-p-70394.html that cost 313€ + 60€ ship! So it is very expensive!!! And ship are very very espensive!!! Or there is the fantastic slash (adviced from willy) but the small version 1/16: http://www.rcmart.com/traxxas-700541-slash-scale-short-course-racing-truck-p-65793.html cost 170€ + 40€ ship... so total 210€ not bad!!! but it is very small!!! it is 1/16 or, the slash 1/10 with TSM.... That is a good thing I suppose! http://www.rcmart.com/traxxas-5807624-slash-brless-p-72932.html that cost 300€ + 55€ ship cost a lot.... Why so many difference with tsm of cost????? Or slash with TSM and with brushless motor: http://www.rcmart.com/traxxas-6808624-slash-p-72933.html that cost 370€ + 55€ ship... Mmmm it is very expensive! Or... what I have choose.... The MST CXF chassis that have FREE SHIP!!!! Yea there are 4 version! one with only chassis and other 3 with ESC and motor.. I just always thinked that it is better without motor... but... for at maximum 35€ differnce... maybe I can buy a motor! What do you think?! So that are the 4 version, ordered by price: Without motor : http://www.rcmart.com/532148-front-motor-high-performance-crawler-p-71109.html price is 187€ simple motor (maybe MST) : http://www.rcmart.com/532149-front-motor-crawler-p-71110.html for 211€ (24€ plus then only chassis) motor is ESC: XB60 (brushed), Motor: M54-26T (brushed) so it is NOT better then mine... so maybe it is not a good choise with hobbyking motor: http://www.rcmart.com/cb1056-front-motor-crawler-532148-hobbywing-quicr-p-71230.html cost 215€ (4€ plus original motor and about 30€ from only chassis) that motor is only brushed and support 3S LiPo too (but maybe are very very too mutch) with yea racing motor and different poinion : http://www.rcmart.com/cb1051-front-motor-crawler-532148-yeah-racing-p-71115.html that cost 220€ (that are 35€ plus then the only chassis) with the pinion too... Support LiPo 3S but motor included it is still brushed So... FOR NOW I'm maybe buy only one MST CFX for my pajero!!! Maybe, when I will have more money... I can buy a slash or e-revo or fantastic TRX-4! So remaining on that 4 version of MST CFX what you advice to me for buy?! thinking about it maybe the better choise is between the only chassis or the YEAH kit... For 35€ I have plus a pinion, an ESC, and motor... that are not for brushless... maybe are not a better choise... but.. I'm asking to you! So, what you advice me to buy?! MSF CFX onlu chassis or with some kit?! thanks Massimiliano

Yes I see: https://tamico.de/TRAXXAS-TRX-4-Land-Rover-Crawler-RTR-silber but it is 550€ not 389€!!!! ****!

I came from ITALY!!!! And Traxxas not ship in Italy!!! :-( In Italy cost about 550€!!! ****!!!!!!!!!!!!!!! It is better, for some thing, buy from china respect from USA... :-( If you know some shop that have the TRX-4 in europe, please tell to me!!! thanks Massimiliano

Very fantastic this one!!! Is the same of the before post but without motor!!! It can be a very good increase! Fantastic!!! Now I'm thinking about if buy this one (that is very fantastic) or maybe a TRX-4 (Traxxas) or maybe change all my mind and go with a buggy.... D A M N ! It is too hard to choise!!! Do you now some one sell an USED TRX-4?! the advantage of TRX-4 is that have locking diff via remote that is very very very a good thing!!! Tha Chassis you posted from RC mart have diff always open, right? and not blockable? there isn't something similar to this chassis that have locking diff? thanks Massimiliano

Hi Njmlondon Thanks for your answer! Yes... it break very soon.. I see this. http://www.rcmart.com/532149-front-motor-crawler-p-71110.html?cPath=1102_1106 seems have a good steering angle, a good diif and not Front Indipendent Suspension but same system rear and front. very good!!! But it is possible to set up a bodyshell? And I not want motor and ESC ****! I search if there is a version without it!!!! eheh! It will be fantastic if have locking diff! ****! thanks Massimiliano

Hi to all! How are you?! Me not very fine! Yesterday my chassis broke :-( ****... I have cut too mutch .... In your opinion what I can do?! Buy another chassis, buy another complete tamiya (maybe pajero metal top, that is CC01 and "old" version of real pajero model) or maybe buy another type of RC?! In a shop near my home is selled an used chassis buggy for 200€ and I must buy all other else (wheel, motor, remote, etc...) that is full metal and original predisposed for nitro... Massi

Hi! Today arrived my kit steering but... NOT WORK!!!! I perform two video as you can see below,,,, It my wrong mount or is the item defecting? The bar that connect up to down have one side not good and the pieces "slip" a bit inside... edit: @WillyChang I see only now your answer! Ahah I'm an Engineer... a computer engineer for your lucky eheh thanks Massi

Hi All I'm trying to use 2.2" wheel! Now with dremel I can cut As I want... What you think about my RAW work in photo? I must cut mutch the connection between two part of body Shell... It will be instable and subjected to break? I must put something to increase strenght? Now I must adapt a bit the body Shell and finalize the chassis in a good way... Thanks Massimiliano

Hi! I have tested my Pajerino yesterday with a "good" satisfaction! It is very hard to stuck it but a few time the diff still slip one wheel and leave other blocked to earth with no torque :-( maybe the grease I buy is not enought strong... I need to change it with a more hard one! But the big problem is that it seems not steering mutch... not the limiter etc but the "power" of steering: it is very hard to make it steer and some time I need to rise up in my hand (and leave the wheel NOT touching earth) to complete steer or go ahead to increase power steering... i have just buyied a steering kit in alluminiom it is on arrive... I buy one "normal" kit with maybe a plastic bearing (this one: https://it.aliexpress.com/item/DQR-RC-AUTO-1-10-Alluminio-Sterzo-Cuscinetto-Campana-manovella-Montaggio-Argento-TAMIYA-CC01-CC048-RC123/32853460176.html?spm=a2g0s.9042311.0.0.r5yyAK ) maybe I can resolve with this kit.... I don't know! I'm asking two more info: 1. For diff, with my only PARTIAL success, what gradation of strong you advice me to buy? On one shop near my home are present grease from 100.000 to 1.000.000 of strong degree... So if I need to change it, this time, I will buy a right one! I want to put in my rear diff and in my front diff, if you advice me i can put different strong grease in the two diff. (some post ago you tell me a Tamiya grease but I not found its strong power ) 2. what I can do for my steering? is possible that after using it on mud and water I break something? maybe servo? (it is Carson Marine ....) or maybe the ESC?!=?!? thanks Massimiliano

Hi Willy! Ok ok ok! I not know that color are not standardized! For now in all motor all color are matched with correct A B C. Ok Fine.... Now I have solder wire in this way... I wait cable ordered and i will solder the wire in the motor, previous I will desolder all existing connector etc, so I will have a very clean circuite! Ah: Today I order a dremel with some insert and optional. I need it not only for my RC but for other passions eheh! So it will be a right buy (I hope) thanks Massimiliano

Hi Willy many thanks! i not supposed it is possible to pull out due color of plugs! because if i want to remove I musto to leave out the colored cover too... So for now the work was did as in the next photo... asap arrive new connector i will change in a good way and definitive.... Meanwhile I'm dreaming on my new RC but slash is to expensive.... thanks! Massimiliano