doctorhoax

Looking for a good home in the UK

Thanks so much this gave me the motivation to keep trying … ! I tried the fiddling about all over again…setting the throttle as forward mode, reverse mode, setting the end points each time - eventually it seems to be happy again and is working as it should with TBLE 02 and 04 in the meantime I had bought a HW 1060 and that works fine too

Hello I have lost the ability to go into reverse.... Does anyone have any expertise with Sanwa MX-6 radio? I have run into a compatibility issue with my Tamiya ESCs (both TBLE 02 and 04 ) I can reverse using the MX-6 with different ESC, and using the Tamiya ESCs with a different radio... Any ideas? Any way to factory reset the radio transmitter? Thanks

These are harder compound and the right internal diameter but the width and external diameter are a bit smaller than would be ideal

For spikes these also fit great - but are soft and i dont think they'll last long

Thanks- but took the plunge and moved on to 2.4, and found a 3D printed holder.

Hi, sorry no.

I have an odd pair happy to swap either with someone to make a matching pair ! In the UK Thanks

Hi. Where in UK? Thanks

Oh you beat me to it

Tony has the A parts back in stock

Hi Items in the UK free to a good home, I'm looking for some other small bits in a pass-it-forward fashion. Nikko receiver with two servos. Not tested, sorry. Avante 2011 rerelease front coil springs - two pairs available Looking for: an orange band 3 27 mhz crystal, a battery retainer for Df01 (manta ray etc) Thanks

hi ian wallace jk-rc.co.uk has xb m-03 chassis https://landlmodels.co.uk have repro bodies

Hello im looking for an Egress re-release chassis, ideally in the UK no need for wheels, shocks, body etc so looking to pay a fair price thanks

Hello Very original Nissan King Cab restored for sale (UK) Brand new TBG shell and MCI graphics Restored chassis nut and bolt clean and rebuild runs very nicely - more photos and videos available on request Thanks https://www.ebay.co.uk/itm/264690843444

Now sold

Hello. Does anyone have a pdf of the manual for the re-re Egress? It’s not on TamiyaBase. I’m trying to find out what parts are in which bags, as I think they’re different for the rere. Many thanks. The parts I’m looking for (scans are from the Avante 2001 manual) are the brass ‘tube nut’ or ‘pipe nut’ from the front gearbox/suspension assembly (with the matching 3x8 mm countersunk screw). If anyone wanted to sell me a spare one of each I’d be very grateful.

Sorry - it was me that missed it. I’m looking for £300 plus postage. I have now got hold of replacement gearbox covers which would be included.

For sale: original Tamiya 58085 Avante 2001 - Rare and sought-after Tamiya radio-controlled off-road racing buggy. Unrestored condition - body shell is not mint and has some minor damage Vintage contemporary hi-cap hop-up shocks. Original-spec Tamiya black-can Sport Tuned motor. Full set of four very-rare original white Cam-Lock wheels in very good condition (not painted yellow ones!) New re-re Avante cam-lock wheel centres. Original-spec spike tyres in good condition. Custom FRP front suspension damper stay. Also supplied with a carbon-fibre aftermarket replacement option. Tiny cracks in lower gear cases - see photos. More photos available on request. Item is in Cambridge, UK. The Tamiya Avante 2001 shaft-driven 4-wheel-drive off-road racing buggy was released on 19th June 1990, featuring multilink wishbone suspension and a twin-deck FRP chassis . An evolution of the original Avante, this model utilised the lengthened chassis dimensions developed for the Egress. The original Avante bodyshell was redesigned to fit and protect the rear suspension arms. Perhaps the most beautiful of the Avante/Egress series, no vintage Tamiya buggy collection is complete without one! The only model in this series not re-released. With the others (Avante/Egress/Avante Black Special) having been through repeated re-releases, and this model never re-released so far, it is looking increasingly likely there will never be a re-release (hence two recent completed ebay sales for NIB kits at ~£650 and ~£1250). Sales price excludes delivery and local customs/tax/fees. The item is sold as seen and not refundable - I have been very honest and open about details of the condition. The photographs are of the actual item and are to be considered part of the description. Apologies to anyone watching/ bidding recently on eBay - the car is still for sale as auction won by overseas bidder despite the details specifying UK only. Sorry I would prefer to dispatch to the UK, due to frequent problems with overseas deliveries being severely delayed, getting damaged or going missing and as a private seller not a business I cannot afford to reimburse a disappointed buyer.

Sorry you missed out! Either of These aren’t bad for the price https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F382200128578 https://landlmodels.co.uk/collections/210mm/products/mini-210mm-m-chassis-body-shell

Hello I have a NIB unbuilt Tamiya Rover Mini M05 for sale on eBay. ending today UK only despatch I’m afraid thanks for looking Daniel https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F264560634846

Dear all. I am looking to restore an Avante 2001. I am searching for the front suspension springs. I would be very grateful if anyone would be prepared to sell a pair. I would be happy with pretty much any condition I understand they are the same as the vanquish. Many thanks. Daniel

Hi. I’ve been trying to get some FRP akin to the nice looking old stuff as seen on Avante 2001 (looks not unlike carbon fibre but a finer weave) without success. The cheap stuff on eBay is poor quality , predictably, but I also ordered some from Masterplatex and though it seems better made, it still isn’t a match. Does anyone know where some can be obtained?

Hello all. Apologies if silly question but has anyone ever tried/seen the 2001 decals on an Avante original or 2011 shell? if not does anyone know if they would fit? I realise the 2001 rear wing is wider Thanks Daniel