So, the "shift" servo for the gearbox obviously has 3 positions, I have tried the suggested CH4 for this and also Channel 6 on a Carson Reflex Stick 2, which is a 3 position switch. The problem I have is every time I select top (3rd) gear, the rod pings off as if there is too much travel in the servo arm. As per the kit there is no servo saver. I have looked at the MFC-02 instructions to see if there is any way of trimming the servo action back a bit but I cannot see any reference. I am going to swap out the 25kg servo I fitted and add a servo saver to see if that helps but if anyone has any more experience with the MFC-02, any advice would be appreciated.
58397 Hilux & MFC-02 Shift Shaft
in Monster Trucks, 4x4, Wheelie Rigs and Crawlers
Posted
So, the "shift" servo for the gearbox obviously has 3 positions, I have tried the suggested CH4 for this and also Channel 6 on a Carson Reflex Stick 2, which is a 3 position switch. The problem I have is every time I select top (3rd) gear, the rod pings off as if there is too much travel in the servo arm. As per the kit there is no servo saver. I have looked at the MFC-02 instructions to see if there is any way of trimming the servo action back a bit but I cannot see any reference. I am going to swap out the 25kg servo I fitted and add a servo saver to see if that helps but if anyone has any more experience with the MFC-02, any advice would be appreciated.