[Alternative Clutch replacement question TNX/Nitrage.]

Just an update ,i have managed to upgrade the  TNX 5.2 clutch by changing the clutch bell to a hobao 16t as the tamiya one is not wide enough to house a 3 shoe set up ,But as the nitrage has a very unusual clutch bell which uses a dog-bone so for that reason you can't change the clutch bell from the original tamiya one the nitrage comes ,so might be stuck with using a two shoe with the nitrage.

[David Jun's 2005 Race winning Tamiya TNX Replica build]

I just bought a

7 hours ago, acprc said:

Thanks, I need to get the last few parts sorted and finish this one off. Too many projects is the problem!

I just bought a pretty decent TNX5.2r but its a non runner , gave £70 for it, gonna get it running and use it as a runner .
I have plans to ditch the standard tamiya two shoe clutch and try and find a non tamiya 3 shoe that's compatible with the TNX 16t clutch bell .

[Alternative Clutch replacement question TNX/Nitrage.]

On 6/11/2020 at 2:40 PM, hedge said:

A lot of Nitro clutches can be swapped around. I had a quick look at the 32FX engine and manual and it looks like a split circular pair of shoes rather than a 3/4 shoe clutch - which TBH I would expect at this size. However If you measure the shoes diameter you can then look to source anything similar from any model. I have a few different types but they are all for .12 engines and not the size you've got, however happy to measure and compare.

Could i not just replace the tamiya flywheel an two shoe clutch set up with a non tamiya 1/8 flywheel a 3 shoe set up as seen in HPI savages etc but still use the Nitrage clutch bell ?
I was thinking about something like this below .

https://wheelspinmodels.co.uk/i/211925/

[David Jun's 2005 Race winning Tamiya TNX Replica build]

fair play Adam great resto .

[Nitrage 2speed question ?]

On 7/3/2020 at 12:14 PM, acprc said:

https://vikshobbiesmodels.com/product/tamiya-54003-nitrage-5-2-2-speed-transmission/

I think that's a bogus website Adam , i messaged them loads of times about that part

[Nitrage 2speed question ?]

On 6/13/2020 at 1:49 PM, acprc said:

Part Number 54003 is what you need

 

I think finding one of them would be like finding a third nipple age 46 ! lol 
I will keep looking  
 

[Nitrage 2speed question ?]

Anyone know of a 2 speed transmission for a nitrage?  
I notice a member claims  to have bought a new one fairly recently , is it for sale for  big money ??  

[Alternative Clutch replacement question TNX/Nitrage.]

Thanks mate for your reply I will have a look and get back to you.👍🏼

[Alternative Clutch replacement question TNX/Nitrage.]

Guys what clutch would be alternative replacement clutch for the Nitrage or TNX shared clutch ? 
Im running my new built nitrage so want to have a spare.
The tamiya one is now long discontinued im told .  
 

[NIB TNX 5.2r Limited champagne gold edition.]

40 minutes ago, Collin said:

Excellent. Did you found it on the intenet or  "in real"?

Internet Colin ,just got to fight the temptation of running it lol

i got it’s cousin a new nitrage on tarmac tires that I’m gonna run instead,hopefully that will stop me running the TNX .🙈

[NIB TNX 5.2r Limited champagne gold edition.]

Turned up today a brand new in box 2007 TNX 5.2r limited Champagne gold edition,,it was in a model shop in Italy and they had totally forgotten they had it,I just had to buy it, i’ve never ever seen the gold edition in the flesh only see a couple of photographs online an on here. 
Never thought I’d be saying this but I will never run it Lol 

[49460 Tamiya TNX 5.2r Champagne Gold Restoration]

Just now, acprc said:

Thanks

BTW decided to keep the TR15T...sod it lol

[49460 Tamiya TNX 5.2r Champagne Gold Restoration]

looks good adam, fantastic resto,  i will let you know when my NIB lands

[New built nitrage 5.2 questions/help.]

hello guys , i recently got this new built nitrage , im planning on running it (lightly) at some stage but because it was built from kit form it didn't come with the correct tamiya engine dive unit/rotostart backplate , I've been trying to track down the correct one for the 5.2 , but am not sure witch one is correct ?
Tamiya 41075  or 41076  or 41077 ??  
Ive also been having trouble  trying to track down a copy of the kit build manual rather than the RTR mantainace manual that's online? ,can't seem to find that anywhere, also would like a copy of the box and hop ups that was available at the time .
Any help would be great , thanks Garry.

[Hotshot V Super Hotshot]

In the late 80s the car the won the tamiya cha

On 12/9/2014 at 9:15 AM, kontemax said:

The better is Hot Shot 2 but never rereleased and it will never be.

The HS2 has common chassis and mechanics but has more modern rear arms and better suspension design.

Many members think that Super Shot (and Super Hot Shot) is the best suspension solution but this is not true in my opinion.

The problem with SHS suspension is that the bottom of the car doesn't touch the ground. At the end the dampers compression is too short.

Hot Shot 2 ha the front mono shock and many people don't like it but if well adjusted it works good and is plenty of escursion.

At the end the HS2 is lighter than the SHS but, as I said, is not been rereleased.

Max

Not being augmentative but i find what you say someone what surprising , as back in the day I when I was racing these cars near everyone was using the the super shot set up over the hotshot one and two , everyone preferred the yellow cva quad  suspension set up over the two other versions  ,in fact I recall  Tamiya did the full super shot suspension as a hop up kit for the two lesser hot shot versions .
Throughout the 1980-90s my aunts brothers owned a chain of models shops in the uk called "the model shop" (now called Antics) they actually sponsored the uk driver that actually won the tamiya challenge with a modified super shot running that suspension with a full carbon home-made chassis , as a lad I was in awe to get a hold of that car to look at it, one day I got to see it,everything had been changed to save weight ,even the alloy uprights for the front shocks had multiple holes drilled in to save weight as did the modified chassis etc 
The guy that built it and raced it was at that  Model Shop one day, I marvelled  how fast his diffs spun , when I asked how did he get them to spin like that he said no grease run them dry makes them faster , he did the same with the drive shafts to, when that got out everyone one was doing on Sunday race day, those were the good old days lol 

[Bulkhead for Dyna Storm / Blaster / TR-15T (D5, always broken, pain in the ... ))]

On 11/17/2019 at 2:49 PM, GTodd said:

We need a metal version!

In 1993 I had a new tr15t , when those parts breaking I soon had enough so I managed to get the back ones made up in alloy at a little engineering first I knew, the front part I couldn't get made but it rarely  broke  so I didn't pursue getting someone to make it etc 
all these years later Ive just bought a another Tr15T so this thread might come in handy down the line. 

[Tamiya 58044 mitsubishi pajero]

christmas 1984 this was my first Tamiya car , Frankie Goes To Hollywood was playing all over the Christmas with the power of love and I was driving one of these in the snow , I was 10 years old ,those where the days :)