bigvern

Hi , I,m looking for a new or as good as new body for my Lamborghini Countach CS, if you have anything please let me know.[]

i,m stripping a Lamborghini LP500s shell at the moment , its soaking in brake fluid the first five layers of paint have softened and come off but the last two or three are rock hard , i,ll give the costic soad a go and see what happens and let you know. quote:Originally posted by VintagenewbieI know this might sound like a cop-out to the whole striping topic... I would just get myself a nice Repo shell... I figured It cost me more time and effort and dont forget money to strip and re-paint when I could have just bougt a nice repo shell and painted it up. id="quote">id="quote">

Hi, I,m trying to restore a LP500S body shell but need the following: Windscreen Wing Mirrors Air Scoops Decal sheet If you have any parts please let me now.

got the o rings on order i will let you know if they work, thanks for the tip. quote:Originally posted by irenLget yourself several of the red damper O-rings and slip them over the balljoint. they'll act as bushing to tighten up the slop and still soft enough to deform when the suspension compreses. id="quote">id="quote">

Has anyone noticed or is it just me that there seems to be alot of excess play in rod ends which causes alot of free play in the steering. When i drive my 415 slow in a straight line it wobbles from side to side, does anyone have the same problem or now how to cure it?. If you have any info which you think you will help please let me know.[]

I am looking for a new or as good as rear bumper to finish my holiday buggy.[]

Hi, I have new set of new front and rear tyres for a Grasshopper11 if there any good to you, i want £15 + post.

All the bearings are listed in the manual if you have one, once you have a complete list order them from walawala on ebay, i ordered a complete set for my TA03F-S and they worked out really cheap. I was paying £1.75 per bearing at my local shop and the same one from walawala cost me $0.30. Hope this helps[]

Hi, I,m trying to modify my TRF415 to take a 48 DPI spur gear does anyone have or no were i can get one?. If you have any info please let me know.[]

Get TRF415 that will wipe the smile of there faces and put there best to the test, i changed my Lsi XXXGP for one and it is fantastic. there quote:Originally posted by ChrisBI have been looking around at RC car clubs with tracks local-ish to me (SE London) with a view to getting somewhere with a decent track where I can have some fun driving my on road Tamiyas.... Having checked out the forums for those clubs with websites, I have been really surprised by the number of regulars on these forums actively advising people against Tamiya kits, even as beginners [8)] This really puts me off joining most of the clubs, not to mention the fact that nearly all 1/10 electric racing seems to be 4WD saloon racing...... OK if you like that sort of thing I guess. I would love to be able to get access to a track to have a bit of fun racing against other RWD / FWD stock Tamiya's, just for a bit of fun. I'm dying to take my Alfa GTA on track as I think the RWD handling will be a real challenge and fun to learn to control. I am also about to build a TB-01 Lancer Evo and a TL-01 Impreza. It would be great to be able to take these to a smooth dirt track for some rally action..... but sadly nobody seems to cater for this kind of fun racing local to me. I can see why people like to win and be competitive, but it seems a lot of the RC clubs are aimed mainly at the "serious" racer. IMHO this is a real shame as I am sure there are many out there like me that just want a bit of fun and a decent track / circuit venue to drive with other like minded individuals. Does anyone have any recommendations for clubs around the London / Kent area that are Tamiya friendly and have an outdoor circuit? Cheers, Chris id="quote">id="quote">

Hi, I,v just hung up my Losi xxxGP for a TRF415 and its a big improvement alot easier to setup, the only problem is were to find spare parts in the UK. If anyone can enlighten me on were to find these spares i would be most grateful.

I am looking for a rear bumper to finish my Holiday Buggy, it must be in pretty good shape if you have anything suitable please drop me a line.[]

I,m trying to find a rear bumper and a new gear set for my holiday buggy , if you have anything that could be useful let me know.

Hi Shodog, Thanks for the info, i managed to get the bearings i needed from walawala and real cheap to even with the postage alot cheaper than i could find in the uk i got 6 bearings for $6 inc postage.[8D] quote:Originally posted by Shodog quote:Originally posted by bigvernHi Mervyn, Thanks for the info i have sent rcboyz a mail and i'm just waiting for a reply id="quote">id="quote">Good luck. I sent them an e-mail with a request for several sizes of bearings I was looking for. I never got a reply. i suspect they are too busy to follow up on requests. I buy most of my bearings from walawala on ebay. His prices are durt cheap. here is a listing for 6X12 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...513322&tc=photo id="quote">id="quote">

Hi Mervyn, Thanks for the info i have sent rcboyz a mail and i'm just waiting for a reply.[] quote:Originally posted by MervynBigvern, I don't have any bearings to suit your needs but I do have a very good bearing connection. Ebay seller rcboyz has every bearing known to mankind and they are generally between $1 and maybe $1.25 shipped. The local hobby shop here where I live charges between $5/$7 per bearing so I figure this is a pretty nice connection to have [8D] id="quote">id="quote">