Jump to content

Svlreclame

Members
  • Content Count

    77
  • Joined

  • Last visited

Everything posted by Svlreclame

  1. Making the MAP lights, final version will have LED so it can be lit up.
  2. Made some reflectors for the DAF. I also made the honeycomb pattern for more realism.
  3. The fender flap, wheel hub, mirror brackets, window washer jets, outer door handle
  4. Made the combination gauge (the large one on the right), test fitting to check for tolerances.
  5. Made the side window pivot knob, need to paint the centre bolt chrome when the paint is dry. And made the inner door handles.
  6. Making the steps, trailer brake lever and glove compartment knob
  7. thank you, i am building a truck from scratch, these will be installed in the centre console. I am making the whole cab, chassis items, engine and interior myself. The battery and gas tank are also in progress. I have made some adjustments on the battery and will make version 2 as the printer is done with the current print. I will also add some decals to the battery for more realism.
  8. I made some cigarette lighters in scale 1/14.
  9. That is what i use too.... i did not mean it in a bad way. What i meant to say is that practice makes perfect. Some things take time to master, only tons of practice can take it to this level. Do it, look at what went wrong, then fix it and do it again. I do not have a magic trick to get it on. I did however chew through lots of masking tape to learn it. And if i did not like the result i pull it all off and do it again, untill i like it. You will get better with each roll you use. I remember the first time i used the masking tape... i thought i was going mad.... did not get great results at all, but kept redoing it till i got good at it. My first curves were horrible, and that was on a real car, not even a scale model. With everything i do i keep searching for the limits of what a material can and cant do, i like to figure out stuff that most run away from. Only advice i can give is get a box of tape and practice.
  10. I have 25 years of experience with installing vinyl decals, never took a shortcut to figure out how to do something.
  11. I am painting a Globeliner Bodykit. Masking the lines for the stripes Painting the stripes The top stripe colour is a dark grey that has a orange sparkle effect through it, the other stripe is a shadeshifter, that changes from pink to orange to green to orange. In the top stripe there is only the orange sparkle that can also be found in the lower stripe. The thin outline is a dark grey metallic with a violett effect in it. The main body colour is a Black Cherry colour. After sanding and polishing the fenders.
  12. i am booked until August.... shipping cost is not a problem for my clients
×
×
  • Create New...