[1.55 wheels and tyres on CC01]

After being in shipping for nearly 3 weeks, my Baja MTZ tires finally arrived today. They look really good and seem to indeed be just about the perfect size.

[1.55 wheels and tyres on CC01]

Thanks a lot. 196mm should be around 1mm wider on each side. 83.5mm is 4mm smaller diameter / 2mm smaller radius. That is great news as it means the wheels should fit just about exactly how I need them.

[1.55 wheels and tyres on CC01]

On 2/8/2019 at 9:20 PM, Busdriver said:

As promised picture of Wheels/ Tyres.They look great against Gunmetal body. The are a fraction smaller than the stock tamiya ones which are 1.9's. Having said that they are much more scale to a D90 which is fitted with 16" rims. Haven't driven it yet but the rubber is super soft and hopefully sticky.

 

A few tips for fitting:

1 Cut a hex key so it can be fitted into a pin vice.

2  a 4mm spanner

3 use the 2 spare long screws to lock all the bits together then do the other 4 short ones. then take long ones out and do the last two short ones

4 If you loose any of the nuts put head between legs and kiss anything you can reach!!!!. seriously check inside the wheel as they end up in strange places, they are tiny m2 I think .I only lost 1 and luckily had a couple spare from the Traxxas mudflap kit i bought.

 

I have a lot more upgrades for this  car so will now start a new post for all the suspension etc.

 

One Tenth Delica | Facebook
I am scratch-building a Mitsubishi Delica/L300 van body for mounting on a CC-01. The real car has only 28" tires on 15" rims stock and 88mm wheels which come with CC-01 just barely clear the fenders during steering when standing on flat surface. I need different wheels (the size of rim is not suitable either, but that is secondary). I am considering RC4WD's 1.55" stamped steel rims and 84mm Baja MTZ tires exactly as on your Land Rover. I would need to have them shipped internationally, so I am concerned about them not fitting the way I need to. Key part is the offset of the rim and overall width over tires it will create. Stock CC-01 is 193-195mm wide - would you be so kind and measure how wide is over tires your Land Rover? It would help me immensely. When at it, measuring overall diameter and width of the tire and diameter of the rim would also be helpful if you can. Thanks!
Rim: Stamped Steel 1.55" Stock Black Beadlock Wheels (rc4wd.com)
Tire: RC4WD Mickey Thompson 1.55" Baja MTZ P3 Scale Tires