Jump to content

Nesrak

Members
 View Profile  See their activity

  • Content Count

    86

  • Joined

  • Last visited

Posts posted by Nesrak

  9. Posted

    Man I've been here frequently... Anyway!

    I got some 60mm shocks and the Tamiya hard tuned spring kit for my TT-02 that I'm building for rally and was wondering which density springs to use where? I was thinking medium in the front and hard in the back but I really don't know... Does anyone know what should go where?

  14. Posted

    On 11/4/2022 at 9:50 PM, Oosto said:

    Nice work.  I use 55mm 3Racing aluminium shocks on my TT02 rally (with upper mounting holes on suspension arms) and get 20mm ride height which I find is good enough for most of my off road adventures 😊  I suggest getting the Tamiya or Yeah Racing aluminium rear hubs (with 3 degree toe in) and trimming the lower shaft of the front steering hubs (note: there is great video from Mark Bryan RC on YouTube that shows you how to do this) as both of these mods will help you maximise ground clearance without fowling the drive shafts.  I also highly recommend using the Tamiya TT02 dust cover or one from Kamtec (which I use) to protect the electronics and stop gravel from jamming up the steering and centre drive shaft.  Happy rallying!

    Should I get the Tamiya or Kamtec one? I've seen that they are similar but I feel like they really restrict air flow and would make it heat up. I've seen some mesh ones on eBay that look very similar to the one I use on my Typhon 3s which works great. Also I will probably 3d print some wheel covers for over the wheels that should hopefully help.

  19. Posted

    Alrighty!

    I think I'm finally done with this! It took 13.5 hours in total to do and I'm pretty happy with it. Just got all the accessories and light buckets in because I don't think I'll be adding a light kit. Anyways the rest of the electronics should arrive soon so hopefully the rest of the kit will be built this weekend!PXL_20221106_172630271.thumb.jpg.8e677bbaa4606493f5aa1a9edac82c1d.jpgPXL_20221106_172639127.thumb.jpg.28da242f41380f9e43c005bf6c8f9374.jpg

    • Like 6

  20. Posted

    There a quite a few overlaps, slightly off, and bubbles in the stickers but after getting as much fixed as I can I am pretty happy with it! I will do some more touch ups tomorrow (well later today I guess) seeing as it is 1:00am.

    Also I will actually mount everything because in the photo everything was just stuck on for the photo. Thanks guys for helping me with this!

×
×
  • Create New...