hoppi05

you think... i think the yellow ones are pretty hard may give them a swap to the blue ones and see what the difference is?...

I think they were from this user on ebay ebay shocks and the width with is 18mm without is 14mm (i measured these without taking them off so its a pretty good guestimate) and the overall lenght is around 65mm hope that helps

Heres a few picks of the Brat with my new front shocks which were kindly donated by Evirob Cheers mate.... these are mounted on the team CRP mounts. and i have fully ballraced rebuilt the gear box with new parts all the wheel housing and mounts are brandspankers and i have got to say even with a very old stock 540 motor it goes pretty fast a lot faster than what it did when i was a kid... well heres some pics.

HI everyone, I am in need of some new front body mounts for my TT01 I think they are part B13?.... but i could be wrong?.... I have cut the original ones too short and the dont fit my new WRX body could anyone point me in the write direction of were to get some from or has anyone got any they dont need that i could trade?.... cheers...............

Cheers guys this topic has been so helpfully! hopefully it will help others in the future if they ever want to use larger 200mm bodies Some of this is taken from other posts: - Take a look at this link to the rear axles: http://www2.towerhobbies.com/cgi-bin/wti00...=LXGM26&P=7 Here are the front axles: http://www2.towerhobbies.com/cgi-bin/wti00...=LXGM41&P=7 Here are the Hex's: http://www3.towerhobbies.com/cgi-bin/wti00...=LXGF21&P=7 Can you not just by the larger Hex's seperate?....

Cheers guys buy the way i have been reading a few links and they say use parts from a Tamiya TGS, which i think is a nitro car? htese have the same parts as the TT01 just longer?........ could this be true?...... are these the same as the e parts as above?... link link link Also what axles would i need (part numbers?... etc) if i do use the longer hex's as above?.....

ummm always wanted a gravedigger body!..........

Evening all, i have spent a fair bit of time searching the internet now (ebay,LHS etc) I am wanting larger Hex connections for my TT01 chassis like below these are the standard tamiya ones but when using a 200mm body the wheel base is too short (looks stupid too) I know you can just get 190mm bodies no problem but that doesn't solve the problem can you get extra long hex connections..... Now if so can some one please!... provided me with a link or 2..... When searching here and the web i was getting results from other models/kits that may come with the larger hex connections but i am not sure which and where to get them?..... any help really appreicated....

Hi all, well as above really i am wanting a new bodyset and just need confirmation cheers

Cheers Backlash, thats crystal clear now! ill give the 49T a go for now. Cheers

That is quite a lot! i bet it does shift! has it never give you any trouble with the gears? I have just fully rebuilt my gearbox tonight with all new parts and new bearings cant wait to give it a go over the wkend

That looks really good! and the shocks look cool too ithink i am going to order me some! by the way what turn is the motor your running?

Evening all hope alls well bar the weather! dam snow lol , anyway i am in the middle of replacing all my brats gear box with new shiny bits woo but i would like to know what is the best gear set up for the Brat or frog from the original parts supplied. I am going to be uising this car for messing about with basically what it was made for, get dirty and absued lol but i would like the fastest gearing options plz not all out top speed but plenty of go when doing donuts and jumps ect basically i just want it to go fast and wheel spin (how childish! lol) I have a 49T - 50T - 51T - the big cog that goes in the middle I also have a good few cogs that can fit the motor from 19T upwards i think so could anyone tell me which option is best cheers

I agree with evirob i have fitted the CRP mounts and the distence is 60mm i was wanting some dampers for it so i have also looked at the 60mm yeah racing shocks and would really appreciate evirob's feedback as i have them in my watched items. The doo look as if the would fit without issue but ya never know?.... heres a pic of them Ebay Link Also would some 90mm fit the rear?.... here they are pics and links Yeah-Racing-DP-0006BU-Alloy-90mm-Damper-Set GPM-AB4090A-Alloy-Front-Damper-90mm All the prices are pretty good what you guys think worth it or not?...

Howdo all, could you tell me which charger you think is best in these? i only use my cars for messing about with nothing serious like racing, just want somwthing cheap and pretty fast i am going to be using 3000-3300 mah batteries Mains or 12v input 4-8 cell charge capability 1,2 & 4 amp selectable charge rate Suitable for both Ni-Cad and Ni-MH batteries AC input switching power supply Built-in DC cooling fan 10 bit microprocessor controller to increase battery lifespan Output has reverse polarity and short circuit protection LED light and beeper to indicate the charging status 31.00 WebCut Price: 29.45 OR AC220/230v and DC12v input voltage Delta Peak Cut Off Auto Trickle Charge Fast Charge 3.5Amp Slow Charge: 130mAh 4.8~9.6v AC / -130mAh 4.8~8.4v DC Fast Charge 7.2~8.4v NiCad Packs Slow/Fast Charge 4.8~8.4v NiCad/Ni-MH Packs DC Input Slow/Fast Charge 4.8~9.6v NiCad/Ni-MH Packs AC Input Auto Shut Down Reverse Polarity Protection Audible Error Alarms: Output Disconnection NiCad/Ni-MH Short Circuit Low Input Voltage 25.65 OR The xBase Deluxe provides you with an affordable, computer-controlled universal quick charger which allows you to charge both traditional rechargeable NiCd, NiMH as well as PB battery packs. In addition, it can also universally charge or regenerate the new rechargeable Li-ion and Li-Po battery packs from the fixed mains supply, an automobile battery or another 11 -15 V power supply. It provides the enthusiastic model sport user with a high degree of flexibility while enjoying his hobby both outdoors as well as indoors. High-contrast two-line LCD display for showing all relevant parameters, such as power, voltage, charging time and charged-in capacity. Technical Data: Operating voltage: 230V 50 Hz AC / 11-15V DC Charging current: 100 mA - 5 A (max. 50 W) Trickle charge (NiCd/NiMH) : 100 mA Weight: 590 g Dimensions LxWxH: 119 x 102 x 85 mm Rechargeable battery types: 1-14 NiCd cells 1-14 NiMH cells 1-5 Li-ION/Li-Po cells 1-6 Pb cells *Requires battery connection leads 47.99

Cheers guys i am gong to start scanning ebay and the for sales section so if anyone has one they dont want give me a shout a may be interested cheers

Howdo are you in the UK? I have just put a post up for charger info. i used to be into RC about 15-20yrs ago but need new equipment.. how long would these chargers take to say charge a 3000 mah battery? cheers

Hello everyone i have been on here for a while now whilst restoring some of my old cars and buy some new cars off you guys latest been a TT-01 which is pretty cool, anyway my batteries and charger are now 15-20+ years old so me thinks its time for some new ones. I have been looking on modelsport at there chargers but it doesn't state clear charging times. I know this is going to be different for every type of charger and battery combo but theres got to be a guestimate time. So i want to speand around 50 on a charger which do you guys surgest?..... Heres the page on modelsport : - Modelsport chargers what i could do with is guestimate times for charging a say 3000-3300 mah battery on some of these chargers or any you surgest?... Cheers for a help provided (I also did spend time seaching the past post but need new info all the pak time stuff?)

Dam that is so cool like you all i would kill own one of them!.............

well cheers guys a lot of help there i think ill be giving the the Mtroniks ago by the way i found this with my old gear when restoring my old brat's and mud blasters any idea of what this model is and what its capable of?... (probably not much lol)

Howdo everyone i want a cheap cheerful esc for my run about tamiya pickups i have these two in mind, what are you thoughts and opinions on them (which best?..)

what about this ESC

Much appreciated TAZ-NZ and everyone for your good advise i have been taking notes and roll on pay day lol and thanks for the nice comments on my Blaster

Also lol are these mtors any good for these chassis?... I have got a Team Orion Core Modified 10 x 3 Motor, Team Orion Peak 19t Element V2 Motor, Vega Flux 19t Motor. What sort of ESC would be needed for these?..

Hi guys what bearing set(s) do i need if i am using the original Brat and Blaster gear box set ups?