hoppi05
-
Posts
217 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by hoppi05
-
-
4 cell hummmm i think ill stick that little disc in 1st and scan the manual to be sure
i must admit i have opened it now and it feels really good! i am heavy handed and i dont think it feels cheap or flimsy i cant wait to use it.... its super light weight but i dont have the 8 batterys in yet. the receivers are super small they look superb! (except for the images above lol) i will put some feedback on when i finally get chance to use it..... bugjammer i hope your next one doesnt go up in smoke (or mine for that matter
) -
Oh dear mine tunred up the other day not had chance to look at it yet though! hopefully it wont do that!!!! i order an extra 5 recievers when i got it to save on postage....
-
I said they'd fit, didn't say they were any good. I'd rather use the plastic CVA dampers myself, or shell out a bit more and go for the Tamiya DF03 or DT02 alloy dampers. There is no comparison in quality between the 3Racing dampers and the Tamiya alloy dampers.
haha good job i didn't buy them..... got some others
and ill look for that set mark cheers again..... -
i thought as much never done that before but good to know cheers i think ill order them tonight....
has anyone used these before?
cheers
just looking at Dinballs turnbuckle sets would the DF-02 Sets also fit the blitzer?
cheers again...
-
cheers Mark - Do you mean put a o-ring in the inside of the oil cylinder on the shaft to reduce the length or have i miss understood?
-
Evening all i have spotted some dampers from Dinball on ebay that look a good price and wonder someone could tell me the length of these DF-03 Dampers and if they would be a direct replacment? I know the DF-02 Dampers fit but not these there are no sizes listed?
if not Dinball has some 100mm and 80mm dampers seperate...
link - Ebay Dampers Link
cheers guys...
-
No problem Rob its not a problem i was simply returning the favour other people on this forum have offered me in the past.
well if no one wants these parts whey will be binned (again lol) tmoz.....
-
Cheers for the help lads thats some superb information!!!!!
i will try and get this and get it restored i look forward to giving it a try and have to admit after reading all your posts and reading the 19 pages of Singapore_959 post on the DS updated chassis and all the parts i was like get me one now lol cheers for all your feedback.........
-
Well Gruntfuggly thankyou for the reply and you have answered my questions perfectly i think i will give it a miss because i use my cars and they do get bashed lol
cheers
-
Hi all after reading some good posts on the Dyna Blaster/Storm i am thinking of getting one to go along with my Stadium Blitzer and Thunder... can anyone provide some simple answers to a couple of questions i have?....
How do they compair to the Stadium Blitzer and Thunder i no they are an evolution of them? (Handling-Gearing)
How available are replacement parts for these i have read somewhere the Dyna Storm was re-released?
Also how crazy fast can these be made i no the Blitzer and Thunder chassis are superb for bashing and stupid speed lol can these handle and take the same punishment?
well thank-you lads and lasses i am off to read some more posts and hopefully see if i can get one (i have a friend that has just found one in his loft ;-) )
Cheers
-
if my new transmitter turns up i will be 2.4 if not i have lots of 27mhz to choose from... ill need to confirm later if i can attend... cheers for the info...
-
Rob i got your PM and these are the parts i have let me no if they are of use to you and ill sort out sending them your way....
-
i remember when pentti was bashing this around the Uk in 88 rally championship wicked car and a wicked looking copy! very nice!!!
-
If my new transmitter turns up i will try and get there should be real fun! is this or the whole wkend as i have seen camping mentioned?
-
Rob i have found the parts not sure how useful they will be PM me if you still want them and i will send them up for you at some point next week.... and whilst your tinkering with the transmitters i think i found the innards of an acoms receiver so ill stick that in too...
-
Cheers for that mine is on order from a seller on eBay wowmodels I think they have sold tons of them I also order an extra 5 receiver's as they were so cheap I may aswell save on shipping too. I can't wait to try em!!!
Ill let you all know how I get on with them hopefully it will be all good!.....
-
Rob i chucked them becasue when i saw them in an old RC box last week i just thought am sick of them they have been hanging around for years n slung them in the bedroom bin!?!?! very unlike me but i was cleaning up at the time which is also very unlike me lol i must have got confused!... if they are still there i will pull them out for you....
now i cannot comment on there ability to work they had been in an untouched box for years and in another box before that! the transmitter did work but i cannot remember why i stripped it??? i am sure the case broke near the aerial and thats why not be cause it was malfunctioning? if they are in the bin when i check in the morning i will check them out to see there real condition but consider them yours (all be it the postage
) -
Guys can you tell me where you got you Robinson Racing 13 tooth 32dp pinion from? i have seen there website but its in the USA is there a UK supplier? also which pinon is the best they list:-
32 Pitch Hardened Alloy Pinions - 1713 Hardened 32 Pitch Absolute Pinion 13 Teeth $4.95
32 Pitch Alloy Pinions - 0130 Steel Alloy 32 Pitch Pinion 13 Teeth $3.50
Metric .6 Module Steel Alloy Pinions - 1113 Metric Steel Alloy 48 Pitch Pinion 13 Teeth $3.50
which one is the most suitable?
cheers....
-
Well i cant tell you honestly if its any good on grass but i have started a Stadium Blitzer and a Stadium Thunder project to do the exact same as you, to 'off road'. i fancied a change also and from all the comments and videos ive seen of the Blitzer family they have no real issues off road but they dont offer a huge ground clearance....
hope that can help and good luck with what ever you choose and enjoy...
-
I cannot help with the question you asked here but i have just thrown the entire innards of one of these controllers in the bin! if it helps i think i can fish it out and send you it if you cover the postage....
-
guys i still need the above parts can anyone help and what part tree is the battery stay from?
cheers....
-
dam all my crystals lol poor crystals orwell i am going to get one of those 2.4ghz FS-GT3B ones they look good for the money and for the use i am going to give its hopefully going to be a great purchase!?!... + i am going to order some extra recievers as they are only £6!!!
ill let you all know what they are like some point next month when they turn up......
cheers for the help and input guys......
-
hummm i like that one n the price seem daftly low!
so i take it my 27mhz crystals will be no use with these 2.4ghz systems? cheers again...
-
Hi all u have spotted this transmitter on eBay it sounds good for the money its only £25. Here's the link
http://www.bigdotunclestore.com/product_detail.php?id=381
Does anyone know if this will work with my exsisting acoms receivers and servos because it says digital servos needed???
Cheers for looking and any feedback
PS this is sent from my phone so plz excuse the lack of proper links n punctuation
i must admit i have opened it now and it feels really good! i am heavy handed and i dont think it feels cheap or flimsy i cant wait to use it.... its super light weight but i dont have the 8 batterys in yet. the receivers are super small they look superb! (except for the images above lol) i will put some feedback on when i finally get chance to use it..... 
)
I'd rather use the plastic CVA dampers myself, or shell out a bit more and go for the Tamiya DF03 or DT02 alloy dampers. There is no comparison in quality between the 3Racing dampers and the Tamiya alloy dampers.
and ill look for that set mark cheers again....._001.jpg)
i will try and get this and get it restored i look forward to giving it a try and have to admit after reading all your posts and reading the 19 pages of Singapore_959 post on the DS updated chassis and all the parts i was like get me one now lol 
Just Received My Lipo And Brushless
in General discussions
Posted
Spetz83 i am thinking of going brushless can i ask how much did it all cost the motor, battery and charger?
cheers....