Search the Community

Ever since the tamiya gf01cb series was released, I have been very interested in the comical classic buggy . But the GF01CB seems a bit too high. It looks like a mixture of BUGGY and BIGFOOT. So I have always planned to make a low chassis COMICAL AVANTE and HOTSHOT. Give them the same feel as the 1/10 version. Finding a suitable chassis is a long process. The front end of the comical avante is very slender, and most chassis cannot be covered by it. Later I found Caster's 1/16 buggy, which has a very special design and is narrow enough in the front, and has enough space for me to make various interesting devices. This car is quite old and must have been in stock for a long time. I rebuilt its differential. The good news is that it has a sealed differential as well as metal gears, which means it should be able to handle the power of a brushless motor. So I added a DRS and made some small modifications to the driver figure so that his head could move according to the movement of the vehicle. I also made a CNC aluminum alloy damper plate for him, and chose a gold damper. I also added goggles to make him look more like the 1/10 version driver. Of course, I also made the iconic front and rear bumpers, and printed a lot of test parts to test the size and matching. I also tried to make a nose wing, and it really looked like a mini F1. And of course the very iconic wheel caps Finally, I installed a 2838 brushless motor, a 35A ESC, and a FUTABA 3003 servo. When all this was completed, I felt it was very worthwhile and achieved the results I expected. Next, I plan to take him out to shoot some videos during the National Day holiday. I am looking forward to the performance of this comic avante.

This should be fun - only my second build, after a lunch box during the lockdown. I bought this kit off @Grumpy pants and have a few hop up parts (green trim) - but basically going to aim for the box art. What I really wanted is a fun car that behaves like a monster truck, on a modern chassis. I'm hoping I get the same fun as I do from the lunch box.... but with a wee bit more steering. This will take me ages, as I like to sit down for a short while every night, have a drink and listen to radio 6. If I do it too fast I'll only have to buy another one . I'll post a few pics as I go.

My version of the Comical Grasshopper or comical rough rider?

Inspired by @HondaHan's recent post here, I am looking at ways to lower my Comical Grasshopper. I'm after some advice about how to do this best. I won't be widening teh stance, as I have that covered with me wheels. I just need to go low. Pics show my current setup, which is base don the Yeah Racing WR02 hop-up arms and Shock Gear dampers (55mm version). The need to be lower comes partly from the huge silly tyres I'm using :-) Big wheels, slammed low is what I'm after! I figure If I drive on tarmac and with stiff shocks this should be OK. On the front, I think I have the optimum choice of holes to lower the ride height, but correct me if I'm wrong. On the rear, I have an issue. If I use what I think are the optimum holes (inner most at top, outermost at bottom) the shocks rub against the suspension mount at the top. This seems to be due to the fact that the yeah racing rear shock mount is about 5mm thick, and thus changes the angle of the real shock so that that slope backwards by about 5 degrees, instead of being pretty much vertical (when viewed from the side). As a result, the top of the shock is just too close to the shock tower when using teh inner most hole. This feels like a design flaw, unless I'm missing something? Is it possible to get a longer screw-in ball joint at the BOTTOM of the shock to move the back end 5mm further back to match? What other options are there? Second issue relates to the length of shock. I got the 55 mm version as they pretty much match the stock shocks, but I'm thinking perhaps the 55mm 'touring car' versions would be better? It is good practivce to lower a car by limiting the length of the shock? That feel like a hack to me, but perhaps it's normal? Could I go even shorter that 50mm shocks? Thirdly is just 'what am I missing? If people want a super low stance, what are the other options, and what other considerations showed I be thinking of? Thanks as ever. I'm always so impressed by the generosity of this community.

I am planning a new look for my comical Grasshopper and aiming for something like this amazing beast from Blockhead Motors. I’m mainly into this kind of wheel and tire combo. Totally unsure what I should be searching for to find things like this. Stadium truck wheels? Short course? Or is it not that complicated? In short, i’d Like large iadmatre wide wheels with matching slicks. Wondering if anyone could recommend options and advise if I need to worry about offset of anything like that? cheers!

I did some 8 deg c hubs for my Comical Hornet. They will fit any RWD vehicle that uses TL01 derivative suspension - Any of the WT02 derivatives, WT01, M04, there may be others. It improves front grip. It does exactly the same job as Tamiya 54661 but is a bit cheaper. If you have a GF01 or 4WD WT variant you need the Tamiya part. These don't have a hole for the front driveshaft to maintain strength in the 3d printed material. They are on my Shapeways store now. The other bonus for Comical chassis owners is these come in a loaf of colours, so you can get a green one for your Grasshopper, or pink for your Frog. http://shpws.me/RiXw