Search the Community
Showing results for tags 'hobbywing'.
Found 4 results
For sale is a BOX FULL OF SWEETS. (box included) Belowe is a list, just to point out! the servo handles 25kg and has titanium gears, usually used in 1/5 scale racing competition. the esc is 2s and 3s compatible, the motors are only 2s. the esc limit is on 2s - 3.5T and on 3s 10.5T The esc's come with a USB adapter for firmware flashing and setup through pc. the link to the software can be found here. https://www.hobbywing.com/article.php?id=162 asking price is 140€ plus shipping. Willing to accept offers also will be put on ebay in two weeks. If sold seperate... prices below 1. Hobbywing 120A X-Car esc 20€ 2. Hobbywing 120A X-Car esc 20€ 3. 2 sensor wire (short/long) 4. Servo HITEC HS-7955TG TITANIUM Gear 70€ 5. LRP 10.5T Sensored Motor 30€ 6. Trackstar 4.5T Modifies sensored motor 30€ 7. Hobbywing usb adapter 5€ 8. MST 2.0 LSD Gyro (with manual) 30€ 9. Slidology speed fan 40x40 10€ 10. Yeah racing motor heat fan mount 10€ 11. 2x Venturi fan adapters 40x40 7€ 12. LRP S10TC Spare chassis parts, might fit some of these parts on a tt02 or tb03/ta05 range 20€ 13. LRP s10TC big bore 55mm dampers with ball nuts 10€ 14. spare 60mm dampers free Great for somebody who wants to finish some cars or even for racing, as these escs and motors are roar legal and servo. Everything tested and working. Also the servo cost about 100euro, so this could be a good deal. If needed I can ship also a FlySky GT3 3ch modul radio with 1 rx. Thank you for looking.
Probably a recursive question, so apologies in advance and thanks for any replay on that topic. Car: Tamiya DT-03 full of hop-up parts, as many that I think buying an Egress would have been cheaper. Use: Occasional, just for fun, a bit of bashing but nothing extreme, just a way to disconnect. motor: Hobbywing xerun Justock 3650 13.5T G2.1 ESC: Currently for brushless only the Tamiya TBL-E02S, but not ready for Lipo's ( I have the alarm thing but I don't like it ) and the classic Tamiya aluminium plugs for the motor don't fit the 3.5mm golden banana males of the motor.. so I should have to cut and replace and I am not whiling to do it and prefer to keep it as it is and use it with NIMH + brushed stuff Battery: Gens Ace 4000Mah 50C Lipo ( tamiya connector ) Soldering skills: Almost none, but watched lots of youtube tutorials, so no skills. Based on all that data, I was thinking of the natural matching companion, the Hobbywing xerun XR10 justock, which is 60A and uses to be sold together as a combo ( I got the motor new from a guy but half the price ) The thing is, this ESC is not particularly expensive, around 60€, but based on my non competition use I was wondering if I could go for something cheaper, maybe also hobbywing? Would other brands work well too? What about Hoobywing clones? This combination seems to be designed to perfectly match together, the esc comes with banana connectors that fit the males in the motor, so no soldering is required apparently, at least esc-motor, and I guess I will have to figure out a way to connect to the tamiya battery. The ESC also claims something I can't understand about TimeZero.. Any suggestions on what should I go for? Thanks!
Hello I am selling the power combo that came with a used RC I recently bought. Price is 25€ for each or 45€ for both. Shipping in Europe is included in the process. I am also open to offers. If you have any questions, just let me know. The ESC is a Yuki model Samurai SL 45A. The esc is sensorless and it is also marketed as waterproof, even though I don't think it really is. Definetely looks water resistant. This was installed in a Tamiya XV-01, that is why the wires are extended. Unfortunately the previous owner used extensions with wider terminals than what the motor has so those would have to be removed. I would actually suggest to remove the extensions altogether since the connection was not the best. That said, there is sufficient length of wire for a lot of applications. The ESC is programmable via card, but I do not have it. Even though the ESC looks like a hobbywing rebrand it people in rc forums say that it is not compatible with the hobbywing program card. Even though I do have one, I am not willing to risk damaging it by trying it. The ESC is outfitted with a deans plug and also has a fan integrated. The motor is CS rookie rocket 3100kv, sensorless, 2 pole brushless motor. It is a rather mild motor and good replacement if you want to have a mild brushless setup for a 1:10 touring or rally car. The motor has a few dings but works fine. As you can see it really looks like some hobby-wing rebrand and I am pretty sure it is.
Hi, I'm having a clear out of my Tamiya M05s. I really haven't used the cars, but this is still a reluctant sale. The price may seem high, but for it all new it would be around £1,000! M05 Pro: Fantastic condition, used a handful of times, like new! Tamiya Carbon Front Damper Stay Tamiya Blue Alloy Front Hubs 3Racung BlueAlloy C Hubs Tamiya Universal Shafts 3Racing Differential Tamiya Ball Bearings 3Racing Blue Alloy Steering Link Tamiya Blue Alloy Steering Set Tamiya Silver Alloy Steering Posts (Slight Issue with screw, doesn't effect steering) Tamiya Alloy Rear Hubs Tamiya Stabiliser Kit Carbon Rear Damper Stay Tamiya BlueAlloy Motor Mount 3Racing Blue Alloy Motor Heatsink TRF Bronze Dampers (Not Silver Dampers pictured on car) Electronics: Savox 1251 Servo Hobbywing Xerun 60a 2S ESC Hobbywing Programming Box Hobbywing Ezrun 13t Motor Tamiya TRF Bronze Dampers (Not Silver Dampers pictured on car) M05RA: Great Condition, fairly new gears and shafts, not used often. Ball Bearings 3Racing Universal Joints 3Racing Alloy Motor Mount 3Racing Alloy Steering Set Electronics: LRP Spin Super ESC HPI Flux Motor 13.5t Futaba Servo (Please not, Oil Dampers on the front of the M05RA are not included) M05: Good condition, spare car, hasn't been used much by me. 1 Crack on front of chassis, doesn't effect performance. Tamiya Silver M03 Alloy Front Hubs Tamiya New Driveshafts Tamiya TRF Bronze Dampers Ball Bearings 3Racjng Alloy Rear Hubs Electronics: Savox Water Proof Servo Podium Brushed ESC HPI Saturn 20t Motor Spares: Carbon Front Bumper x4 Front Wishbones x1 Rear Wishbone x4 Friction Dampers x4 Roll Bars x1 Steering Bar x1 M03 Battery Holder x3 M05 Front Uprights x1 M03 Front Ipright x3 M05 Rear Hubs x2 M03 Rear Hubs x1 M05 Rear Suspension Block x3 M05 C Hubs x2 M03 C Hubs x7 M05 Rear Suspension Mounts x1 M05 Battery Holder x1 M05 Front Bumper x2 M05 Electrics Trays x1 Transponder Holder x4 Battery Bars x1 Compete Chassis Set minus Right Side x1 B Parts (Minus a Plastic motor mount) x2 C Parts (Minus a few parts) x1 3Racing Ball diff x2 Standard Tamiya Diff x1 Spare Gear x4 Bushings Shells: Tamiya Swift S1600: Good condition, few scuffs, minor cracks (under 1cm) Blitz Mini C30: Raced condition, paint scuffed under tape and 2 cracks over arches (Still useable though) Blitz Mini RS4 (Spider-Man): Shoo-Gooed and sticker under the paint on inside. No cracks. HPI Blue Mini: Used once, well painted, 1 dent. Looks great on a car, stripes painted not stickers. HPI Flame Mini: Shoo-gooed, race condition, glitter in paint, flames painted not stickers. Wheels: 1 Set of used Grey Minilite wheels, Tamiya Tyres. 1 Set of used 3Racing wheels with Tamiya Tyres. 1 Pair of used Sweep wheels and tyres 1 Set of new Sweep Racing Wheels in Packet. 1 Set of used Tamiya Rally blocks on Swift Wheels (On M05RA) Also: Etronix Stick Transmitter (Great Condition) Etronix Receiver (Case around bottom cracked and stuck back together, works fine). Tamiya M05 Manual (please note, the Spektrem receivers pictures are not included.) Will not split unless the price is right. £520 (ono) collected (will post, but due to vast amount of stuff I would rather it collected!) Thanks for reading Sam